Used Mütek Mpp 280 for sale (2,517)

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors Nwodpfx Ajxfwdscfsh + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Njdjchqxxspfx Acfewh Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers Nwedpfx Aogl Nlmscfjh + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: Nwjdod Nm Sijpfx Acfeh - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW Nwodjgfm Ryjpfx Acfjh 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Nwjdpfx Acsffh Atjfeh Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: reconditioned (used), Year of construction: 2023, All wear parts are new. Only 704 operating hours. Special price for a lightly used demonstration unit. Base machine: €29,990 net. Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality during continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Njded N Dnhjpfx Acfswh Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compaction via sliding plate. Main press cylinder. Vertical cylinder. . Level sensor: yes. . Requirements for the raw material: - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg. - The feed material must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *available upon request New: With the frequency converter option, up to a maximum of 45% can be eligible for government subsidies. Combination of: mütek briquetting press MPP 60 + dust extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical data of the briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquet diameter: 50 mm Front socket: 50 mm Briquet stroke max.: 40 mm Briquet stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Nedpfx Ajd Su Hxocfswh Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery is also possible in 2 parts Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Option: cooling of the press jaws: no Option: cooling of the hydraulic oil: yes Option: level monitoring: yes CE compliant 2. Technical data of the clean air dust extraction unit MMJET 350: Dust extraction connection diameter: 350 mm Motor: 11 kW Dust extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: excellent (used), VMI SPI 280 Av Mixer Stainless steel Complete with 1 mixing bowl Nice clean mixer In very good condition Nedpjzcrm Hefx Acfswh

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. Nsdpfx Acsb Nulhsfswh --- In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple reversible Hydraulically operated slide Screen size optional (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF, and other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional options for the shredder: - Articulated conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm Nwedpfx Acjv Sqrpefsh - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Nwodjd Hkqhepfx Acfoh Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Fiery NX Pro Server (EX 280) Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Nodpfx Ajzb Aivocfowh Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: as good as new (ex-display), Technical data for the shelving upright: Shelving system: Dexion Type: HI280 The scope of delivery includes: Nodpfxjtrmfwe Acfewh 01x Shelf rack upright, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead web and base plates The uprights are unassembled 2,100 mm high 400 mm deep Note: The shelving uprights are supplied unassembled when ordered. delivered unassembled. For an additional charge of 5.00 € / piece plus VAT, we can also pre-assemble the also pre-assemble the uprights. These are new goods, second choice unused. New goods, second choice means that there may be dust deposits or soiling may be present. Currently available in stock: 30 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Technical data for the shelving system: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 820 mm Number of bays per shelf row: 01 pcs. Number of shelves: 05 pcs. The scope of delivery includes: 02x shelf uprights, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead bar and base plates The uprights are pre-assembled 2,100 mm high 400 mm deep Nwsdpfstrwa Nsx Acfoh 05x shelves, used Material color: sendzimir galvanized Dimensions: 750 x 375 x 30 mm 05x Shelf traverse, second-hand Material color: sendzimir galvanized Clear width: approx. 750 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. 04x compensation plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 01x Load plate with details of bay and compartment loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Nwsdpfx Ajchuvrocfoh Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This machine is ideal for shredding bulky, lightweight aluminum chips or turning chips. Not suitable for heavier aluminum parts. Included: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 40x40mm, multi-rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting mechanism opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen size selectable (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,990 net - Inclined conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Nwsdegmh H Tepfx Acfeh

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. Nwodpfxev Rpxlo Acfjh If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Nsdpfx Aedubpujcfowh Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: as good as new (ex-display), Year of construction: 2024, Special machine for shredding plastics Base machine from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc. - Semi-rigid thermoplastics such as PVC, PP, PE, PS, PU, PET Nodpfjd H R Sxox Acfowh Includes: - Special rotor with embedded blades (reduced load absorption), - Small cutting gap between blade and counter-blade Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control: PLC Cutting unit opening (top) 600 x 800 mm The parts should be a maximum of approx. 500x500 mm *the height is less relevant Hydraulically operated slide Screen size as required (25 - 40mm) For plastics, coarser screens are recommended (30-40 mm) *If you want to shred finer, a two-stage shredding process with a downstream granulator type MVZ (screens 5-15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Further options available at an extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor belt removal) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Alternatively, manual start and stop on the conveyor belt + €595 net Requirements for the raw material: - The moisture content (as received) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. It is also possible for you to send us your material by freight forwarder, and we will document the test with photos and videos. --- *only for brittle plastics with medium hardness, *not for elastic or extremely hard and heavy plastics - this would affect the durability of the system. --- Optionally, the next larger machines would be available: Base machine: Shredder MGZ 830 K-S - 18.5 kW Cutting unit opening (top) 800 x 1,000 mm The parts should be a maximum of approx. 720x700 mm *the height is less relevant from €39,995 net * Options depending on effort Base machine: Shredder MGZ 1030 K-S - 22 kW Cutting unit opening (top) 1,000 x 1,000 mm The parts should be a maximum of approx. 900x700 mm *the height is less relevant from €49,975 net * Options depending on effort Base machine: Shredder MGZ 1330 K-S - 37 kW Cutting unit opening (top) 1,300 x 1,200 mm The parts should be a maximum of approx. 1,200x700 mm *the height is less relevant from €79,975 net * Options depending on effort

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Nwedjfci D Ajpfx Acfsh Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Nwsdpfx Aegbkkrjcfjh Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, Nodpfezbizex Acfswh and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Polystyrene disc: €600 net each

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics Nsdpfx Acob Ny Eyefewh - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor Njdpfx Acsx Af Rdofewh + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.