Used Poltech Shot Blasting Machine for sale (65,657)

Year of construction: 1980, condition: used, Shot blasting machine. Gbsdpfx Apjzkl Ryetep

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Gsdpfozkivtjx Aptsbp Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg Gbsdswaiv Uspfx Aptep

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 15 m³/h, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 2,000 mm, inner dimension height: 650 mm, volume flow: 12,000 m³/h, tank capacity: 2,500 l, air pressure: 6 bar, suction capacity: 12,000 m³/h, New RB-2000 Conveyor Blast System Description: The RB-2000 conveyor blast system from ABRAZIV Kft. was developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The system is manufactured to order and can be individually configured according to the customer's requirements. With a passage width of 2,000 mm and a workpiece height of up to 650 mm, the RB-2000 is particularly suitable for large and heavy workpieces. It offers maximum flexibility for demanding applications in steel construction, mechanical engineering, tank construction, and the metalworking industry. The RB-2000 is equipped with four high-performance ABR-500 blast turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and a uniform blasting result. The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which simultaneously reduces noise levels. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. All functions of the system are operated via a central control unit. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 2,000 mm Min. workpiece length: approx. 1,500 mm Max. workpiece height: 650 mm Blast Turbines Number: 4 Type: ABR-500 Turbine diameter: 500 mm Gbjdpfx Apozikaqetjp Speed: 2,600 1/min Blasting media flow rate per turbine: 150–300 kg/min Conveyor Load capacity: 1,500 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 59–103 kW Cartridge filter: 15 kW Compressed air: min. 6 bar Compressed air consumption (filter): 15 m³/h Other Data Blasting media capacity: 2,500 kg Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 12,000 m³/h Mains voltage: 3 × 400 V Control voltage: 230 V Frequency: 50 Hz Optional Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Application Areas The RB-2000 is particularly suitable for: Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Mechanical engineering Tank construction Contract blasting operations Location / Manufacturing Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast systems individually according to customer requirements. In addition to the RB-2000, other sizes and special versions are available. We will be happy to advise you on the design of the appropriate system and provide you with a non-binding offer. Price on request.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 1,500 mm, inner dimension height: 450 mm, input voltage: 380 V, volume flow: 6,000 m³/h, tank capacity: 2,000 l, air pressure: 6 bar, Equipment: documentation/manual, New Conveyor Blast Machine RB-1650 Description: The RB-1650 conveyor blast machine from ABRAZIV Kft. has been developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures, and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The machine is manufactured to order and can be individually configured according to customer requirements. The RB-1650 is equipped with four high-performance ABR-400 blasting turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and uniform blasting results. The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which also reduces noise levels. A closed blasting media circuit with screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. All functions of the machine are operated via a central control system. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 1,650 mm Min. workpiece length: approx. 1,500 mm Max. workpiece height: 450 mm Blasting Turbines Number: 4 Type: ABR-400 Turbine diameter: 400 mm Speed: 2,600 1/min Blasting media output per turbine: 130 kg/min Conveyor Load capacity: 1,300 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 44 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption (filter): 3.2 l/min Compressed air tank (filter): 250 l Other Data Blasting media capacity: 2,000 kg Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 6,000 m³/h Mains voltage: 3 × 380 V Control voltage: 220 V Frequency: 50 Hz Optional Extras Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Special coating Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Gedjzidykjpfx Aptobp Application Areas The RB-1650 is particularly suitable for: Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Machine construction Tank construction Contract blasting operations Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast machines individually according to customer requirements. We will be happy to advise you on the design of the appropriate machine and provide you with a non-binding offer. Price Price on request.

Condition: refurbished (used), functionality: fully functional, air demand: 6 m³/h, compressed air connection: 6 bar, warranty duration: 6 months, workpiece weight (max.): 800 kg, Fully Overhauled Rubber Belt Blasting Machine GH-4 For sale is a fully overhauled rubber belt blasting machine GH-4, professionally refurbished by the manufacturer ABRAZIV. This machine is ideally suited for deburring, descaling, cleaning, and surface roughening of castings, forgings, press parts, and other bulk goods. Its robust design and reliable blasting technology make it versatile for use in foundries, forging shops, and the metalworking industry. The machine has been professionally overhauled (refurbished) and is in perfect technical condition, like new. It is immediately available and can be inspected by appointment. Technical Data Blasting Chamber Rubber belt width: 1,300 mm Belt drum diameter: 1,150 mm Maximum batch weight: 800 kg Blasting media capacity: 800 kg Blasting Turbines Number of turbines: 2 Power per turbine: 11 kW Gsdpfx Apszicuajtjbp Connection Values Electrical connection power: 27.5 kW Compressed air connection: 6 bar Compressed air consumption: 6 m³/h Extraction capacity: 5,500 m³/h Condition Fully overhauled (refurbished) Technically inspected Immediately available As the manufacturer, we can also offer you the following services, if desired: Transport Installation Commissioning Operator training Spare parts supply Maintenance and service Location: Kecskemét, Hungary Inspection is possible at any time by prior appointment. Price on request.

Condition: refurbished (used), Shot blasting machine, Turntable Shot Blas Machine, abrasive blasting machine, surface treatment machine, Wheelabrator-Berger, Used Machine Manufacturer: Wheelabrator-Berger Maschinenfabriken GmbH & Co. KG Machine No.: 8502 Order No. (Kom. Nr.): 80305 Overall Dimensions Width: 2000 mm Depth: 2150 mm Height: 3900 mm Dust Collector Dimensions Width: 1400 mm Depth: 1270 mm Godszbqp Djpfx Aptsbp Height: 3500 mm Dust Collector Manufacturer: Abrasiv Technical Specifications Automatic cleaning process with air blow-off Total electrical power: 15 kW Refurbished shaft and belt pulley Two electric motors have been rewound

Condition: used, Year of construction: 2013, operating hours: 11,188 h, total height: 5,000 mm, inner dimension width: 250 mm, inner dimension height: 250 mm, workpiece weight (max.): 15 kg, Rotary indexing – shot blasting machine – shot peening Used for cold hardening of transmission components. Manufacturer: AUER Type: SA 1100 S5 Year of manufacture: 2013 Operating hours: 11,188 h Godpfxszdk Nno Aptsbp Workpiece height: 250 mm Workpiece diameter: 250 mm Workpiece weight: 15 kg Number of satellites/stations: 5 - Workpiece loading/unloading - Airlock - inlet - Blasting position 1 - Blasting position 2 - Airlock - outlet / cleaning Number of nozzles: 12 (individually controlled) Including filter system Overall height: 5.00 m Other dimensions, see photos. Well-maintained machine, from a highly reputable company, regularly serviced. The machine can still be inspected while powered on.

Year of construction: 2026, condition: new, Machine height : ~4300mm Machine width : ~3400mm Machine length : ~3400mm Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Frequency inverter for turbine : 2 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 7'' Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. Gbsdpfoi D Digsx Aptep The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Gbodpfx Apevr Tbajtep Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~12 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Year of construction: 2026, operating hours: 4 h, condition: new, Machine height : ~2950mm Machine width : ~1500mm Machine width with open doors : ~2950mm Machine length : ~2950mm Table diameter : 1200mm Maximum work piece height : 500mm Maximum table capacity : 500kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + Touch Panel 7'' Filter : PC2 (1.500m3/h) Total installed power : ~11kW Gbsdpfei Dprnsx Aptsp This type of machine can be assembled before delivery, it takes just a day to prepare it for work. Machine is on stock.

Year of construction: 1994, operating hours: 5,742 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 17-109-94, For sale: PROMECO GT15 turbine shot blasting machine with a rotary table. The machine is fully functional and ready for operation, and can be inspected while running. The machine has been well-maintained and upgraded over time with numerous overhauls and repairs. Sale is due solely to an upgrade to a larger machine. TECHNICAL SPECIFICATIONS: - Brand: PROMECO - Model: GT15 - Year: 1994 - Configuration: rotary table - Turbine: 1 x 7.5 kW - Power supply: 220/380 V - Total operating hours: 5742 h - Includes 325 kg of new, professional-grade abrasive media MAINTENANCE PERFORMED: - Turbine motor replacement - Fan replacement Godpfxjzcwpms Aptobp - Rotary table bearing replacement - Complete replacement of internal wear-resistant linings - Control panel and switchboard upgrade - Overhaul and upgrade of the pneumatic system Machine in excellent operating condition. Interior completely restored with new wear-resistant linings. Includes: - Technical documentation - Certification - Original identification plates Available: - Detailed photos - Operating video upon request - Additional technical information upon request Opportunity to inspect the machine while running. Assistance with loading and transport is available. PRICE: €18,500.00 (excluding VAT), negotiable.

Condition: excellent (used), Year of construction: 2011, Fully automatic Rösler dual-stream cleaning system, automated with industrial robots, cleaning chambers with 2 blowers each, each with 2 loading/unloading containers, year of manufacture 2011, including a wet separator. Gbedpfx Aozb Dqhjptjp

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. Gbedpfxjwt T Uze Aptsp We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Gbsdpfx Apjy Avh Notop Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: used, functionality: fully functional, machine/vehicle number: N/A, The GH-4 type shot blasting machine is primarily recommended for surface cleaning and treatment of cast, forged, and pressed parts in bulk using shot blasting. Blasting chamber dimensions: Rubber belt width: 1,300 mm Belt disc diameter: 1,150 mm Gbodpfx Apsy Nbm Djtsp Max. workpiece load weight: 800 kg Shot charge: 800 kg Blasting heads: Number of blasting heads: 2 pcs Drive motor power: 11 kW Power requirements: Electric: 27.5 kW Compressed air pressure: 6 bar Quantity: 6 m3/h Dust extraction fan capacity: 5,500 m3/h Our equipment is fully refurbished and offered for sale in like-new condition. Directly from the manufacturer! We can assist with transport and assembly upon request.

Year of construction: 1995, condition: excellent (used), MONORAIL HANGER SHOT BLASTING MACHINE WITH WETFILTER Designation: Monorail Hanger Shot Blaster Brand : Schlick Type: DHB 12/14 Workpieces ø: 1.200mm Workpieces High max.: 1.400mm Gbedpfxjd Hp Sqs Aptjp Charge max. kg: 500kg Shot Wheel: 3 Pieces with 7,5kw with Drivers Consisting of: - Monorail Hanger Shot Blaster Typ: DHB 12/14 - O-Hanger System with Workpieceshangers - Main Panel - Wet Filter Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! We can offert for spare Parts for Rösler, Shot Blasting Machines!

Condition: used, We offer a Schlick HB 16/22-5,4-3/7,5 overhead shot blasting machine. Maximum workpiece size – width 1600 mm, height 2200 mm, maximum workpiece weight – 800 kg. Gbsdpfx Apey Abp Sstop Filter – 22 m³/h. 3 x turbines – 15 kW each, turbine diameter – 325 mm Total machine power consumption – 56.74 kW. The machine can be tested. Complete documentation is available with the machine.

Condition: new, Product description: Gbedpfx Apogha A Sjtsp Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Condition: new, Year of construction: 2026, Trough belt, centrifugal impeller, shot blasting system, 7.5 kW, directly driven impeller turbine with 8 impeller blades. Belt width 700 mm and diameter 600 mm. Gbedpsg S Rt Eefx Aptop

Condition: new, Year of construction: 2025, Centrifugal wheel rotating table system D = 1500 mm, 2 x 7.5 kW centrifugal wheels If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. Godpsdtq Ansfx Aptjbp The machines are based on manufacturing at the Grossenlueder site, which has been in operation since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: new, Year of construction: 2025, Trough belt, impeller wheel, shot blasting system, 11 kW, directly driven impeller turbine with 8 throwing blades. Belt width 1000 mm and diameter 900 mm. Gedpfehvikuox Aptjbp

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Gsdpfx Ajwurhieptjbp Manufacturer: KOVO Staněk Table diameter: 1,100 mm Year of manufacture: 2017 Weight: 2,500 kg Very good condition.

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. Godpfxevkf Ags Aptobp (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Year of construction: 2025, condition: new, Drum Shot Blasting Machine; The system consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Screen. Gbsdsvliucepfx Aptsp Shot blasting is performed by having a rubber belt wound over three drums rotate the virtual barrel-shaped chamber while the turbine propels steel shot onto the workpieces. The blasting cabin is manufactured from ST-37 steel plate. Areas directly targeted by turbines (hot points) are reinforced with manganese wear-resistant plates, while other areas are supported with Hardox plates. (Complete manganese plate cladding is optional.) Wear-resistant claddings are designed with bolts to facilitate future part replacements due to wear. Replacement can easily be carried out by your company's authorized personnel. The wear-resistant plates are bolted for easy future servicing. Dimensions of the TK - 6 PREMIUM machine: Drum diameter Ø: 1000 mm, Length between discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 model Ø 320 mm, 7.5 kW motors. Equipped with a rubber belt conveyor.