Used Rafamet Wheel Lathe for sale (25,436)

Condition: used, Year of construction: 1986, RAFAMET UBD150N wheel lathe Range of wheel tread diameters: 700 to 1,300 mm Maximum wheelset weight: 3,500 kg Pjdpfx Asz A Ehtsiregt

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg Pgjdpfshvml Iox Airjt

Year of construction: 1980, condition: excellent (used), Widht: 1000-1676 mm Podpfxsnbfcre Airogt Axis lenght: 1327-2700 mm Diameter of the wheels: 460-1120 mm Axle diameter: 70-200 XAD 112, more information on request

Condition: excellent (used), Polish production Rafamet lathe for sale, efficient machine in good condition after employing electrics and management by Rafamet. The machine worked until the very end, currently disassembled loading machine. Technical data Track width (for normal version) - 1435 mm Track width (for special execution) - 1524 or 1676 mm Wheel diameter - 800-1500 mm The minimum distance between the axes of the sets - 1500 mm Maximum axle clamping on the rails - 25 tons Pjdomidwcspfx Airogt Rotation of drive rollers (stepless) - 15-82 rpm Circumferential speed of drive rollers - 7.5-43 mm/min Feeds of copying supports (stepless) - 0.95-34 mm / min Travel of external jacks - 540 mm/min Travel of hydraulic jacks - 410 mm/min Slide travel - 2300 mm/min Sliding rail travel - 9000 mm/min Weight including standard equipment 25 200 kg Installed power 83kW (after modernization 58kW)

Year of construction: 1997, condition: like new (used), UNDER FLOOR WHEEL LATHE RAFAMET UGB 150 Underground lathe for reprofiling train wheels without necessary disassembly Pjdpfx Asg R Syheirogt Truck guage: 1435 mm Range of wheel tread diameters: 600 to 1,500 mm Maximum axle load: 250 kN Minimum wheel base: 1,700 mm Machine is from 1997 Dismantled, ready for shipment.

Year of construction: 1972, condition: good (used), KZTS 1836A-14 Railway Wheelset Lathe Year: 1972 Pgjdpez A Ap Usfx Airet Max. wheel diameter: approx. 1,140 mm Wheel diameter at rolling circle: 840 - 1,075 mm Max. axle length: approx. 2,600 mm Centre height: approx. 630 mm Speed range: 4 - 31.5 rpm Main motor: 55 kW Dimensions: approx. 7,250 × 4,380 × 1,890 mm Weight: approx. 39,500 kg Heavy-duty railway wheelset lathe for machining and reprofiling complete railway wheelsets. For more details, please contact us.

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Pgjdpfx Aisuddglerot Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Pjdpjk Dz N Iefx Airogt max turning diam 1100mm range of turning diam 460-1250mm

Condition: new, Year of construction: 2026, CNC Vertical Wheel Lathe for Alloy and Steel Wheel Refurbishment A modern CNC vertical lathe designed specifically for the professional refurbishment of alloy and steel wheels. The machine enables fast and precise restoration of the original factory finish, whether the wheel has suffered mechanical damage, corrosion, or welding repairs. Its vertical design provides the operator with full control over the machining process, while the rigid, heavy-duty base ensures exceptional accuracy even when machining large wheels. It is the ideal solution for tire service centers, wheel refurbishment companies, automotive detailing businesses, and small-batch manufacturing operations. Unlike a conventional universal lathe adapted for wheel machining, this machine has been engineered exclusively for wheel refurbishment. This provides several key advantages: Shorter machining time per wheel Minimal cutting tool wear Superior surface finish without chatter marks or waviness Fast and easy operator training The finished surface matches the original factory diamond-cut appearance, allowing workshops to offer premium refurbishment services while significantly increasing profitability. Key Benefits Suitable for passenger car and light commercial vehicle wheels High-precision reproduction of the original diamond-cut finish Quick workpiece setup and intuitive operation Consistent, repeatable machining results on every wheel Heavy, vibration-resistant machine construction Increased profitability of wheel refurbishment services Technical Specifications Parameter Specification Maximum Turning Diameter 700 mm Maximum Wheel Diameter 660 mm Maximum Chuck Diameter 670 mm Spindle Speed 50–1200 rpm Feed Rate 0.1–1000 mm/min Vertical Travel (Z Axis) 550 mm Horizontal Travel (X Axis) ±330 mm Rapid Traverse (X Axis) 3000 mm/min Rapid Traverse (Z Axis) 3000 mm/min Tool Size 25 × 25 mm Motor Power 4 kW Machine Weight 1200 kg Overall Dimensions 1300 × 1250 × 1960 mm Applications Removal of curb rash, scratches, and surface damage Wheel preparation for painting or polishing Restoration of diamond-cut decorative surfaces Refurbishment of wheels after straightening and welding Machining of new wheels for low-volume production Equipment (Depending on Configuration) Special wheel chuck Software package with wheel profile optimization Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance Pedjzpww Aopfx Airsgt

Condition: new, Year of construction: 2026, CNC Lathe for Alloy Wheel Refurbishment This advanced CNC lathe is an indispensable solution for the refurbishment and precision machining of alloy wheels. It enables professional surface finishing, removal of damage, and restoration of wheels to a like-new appearance. The machine is equipped with an advanced CNC control system that allows fast programming of machining cycles while ensuring outstanding repeatability and excellent surface quality. Its compact footprint and ergonomic design make it easy to integrate into any workshop environment. It is the ideal choice for professionals seeking a productive, reliable, and highly accurate solution for alloy wheel refurbishment. Technical Specifications Parameter Specification Maximum Swing Over Bed 710 mm Maximum Wheel Diameter 28 in Spindle Nose A2-6 Spindle Bore 60 mm Chuck Manual Maximum Spindle Speed 1,500 rpm Motor Power (S1) 4.5 kW Equipment (Depending on Configuration) G-code CNC control Special wheel chuck for wheels up to 28 inches Wheel profile optimization software package Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance Available CNC Control Systems Siemens SINUMERIK 808D Siemens SINUMERIK 828D Fanuc Oi-TF Professional CNC Control Systems Psdpfx Aozpwzhoiregt The CNC Alloy Wheel Refurbishment Lathe is available with professional control systems from leading manufacturers including Siemens, Fanuc, and GSK. These systems provide exceptional precision, reliability, and flexibility, making them suitable for both simple machining operations and complex production processes. Siemens SINUMERIK 808D An economical CNC control designed for entry-level CNC lathes and machining centers, ideal for small and medium-sized workshops. Key Features Intuitive graphical interface with Teach-In programming for fast operator training Reliable industrial design resistant to dust and moisture Easy integration with Siemens servo drive systems Low power consumption and minimal maintenance requirements Cost-effective solution for first-time CNC users Siemens SINUMERIK 808 Advanced A modern CNC controller offering enhanced functionality while maintaining simple operation. Benefits User-friendly interface suitable for smaller workshops Rugged industrial construction Cost-effective solution for standard turning and milling applications Improved performance and programming flexibility Siemens SINUMERIK 828D A high-performance CNC system designed for demanding machining applications. Key Features Powerful processor for dynamic machining operations Advanced turning cycles and optimized tool paths CAD/CAM integration for streamlined production Expandable architecture supporting additional machine functions Excellent performance for both prototype and production environments Fanuc Oi-TF One of the world's most trusted CNC control systems, recognized for its reliability and precision. Key Features Outstanding stability during continuous production Advanced turning cycles for threading, grooving, and precision machining Fast and intuitive programming interface Proven reliability with low maintenance requirements Ideal for high-volume industrial applications

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 712 mm, turning length: 930 mm, turning diameter: 712 mm, travel distance X-axis: 450 mm, travel distance Z-axis: 930 mm, spindle motor power: 7,500 W, rotational speed (min.): 40 rpm, rotational speed (max.): 1,800 rpm, total height: 2,000 mm, total length: 2,420 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,200 kg, Equipment: documentation/manual, Special Offer – 5% Discount Available! CNC Wheel Repair Lathe MTP28 The MTP28 CNC Wheel Repair Lathe is a professional machine designed for the refurbishment, repair, and precision machining of alloy wheels from 12" to 28". Equipped with an advanced CNC control system, it delivers outstanding machining accuracy, excellent surface finish, and consistent repeatability. It is the ideal solution for wheel refurbishment specialists, automotive workshops, and alloy wheel repair centers. The machine features an automatic wheel probing system that quickly scans the wheel profile and simplifies programming, significantly reducing setup time and increasing productivity. Its intuitive 15-inch touchscreen CNC controller makes operation simple and efficient. A fully enclosed working area, rigid machine construction, and powerful 7.5 kW spindle motor ensure maximum safety, reliability, and long service life, even during intensive daily operation. Standard Equipment * CNC control system with 15-inch touchscreen * Automatic wheel probing system with dedicated software * Fully enclosed safety enclosure * 12-inch 3-jaw chuck Pgsdpfxszf Immj Airjt Technical Specifications * Wheel size range: 12"–28" * Maximum wheel diameter: 712 mm * X-axis travel: 450 mm * Z-axis travel: 930 mm * Chuck: 12-inch 3-jaw chuck * Spindle motor power: 7.5 kW * Spindle speed range: 40–1800 rpm * Rapid traverse (X-axis): 5 m/min * Rapid traverse (Z-axis): 7 m/min * Cutting feed: 0–200 mm/min * Bed width: 400 mm * Machine dimensions: 2420 × 1700 × 2000 mm * Machine weight: 3200 kg Key Features * Professional alloy wheel refurbishment and repair * High machining accuracy and repeatability * Automatic wheel surface probing * Suitable for wheels from 12" to 28" * Easy-to-use 15-inch touchscreen CNC control * Heavy-duty industrial construction * Fully enclosed and safe working area * Low operating costs * High productivity and excellent surface finish Transport & Delivery We provide professional transport and delivery throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, properly protected, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements to ensure safe and efficient delivery. Worldwide shipping outside Europe is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery, supplying reliable equipment to customers throughout Europe. We provide expert technical advice, machine configuration, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Pjdpfxjuddcgj Airegt Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price. Pgsdpfozxrkiex Airet

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Pgodpezfguiofx Airjt Travelling steady Fully Serviced And Ready For Production

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Pedpfez A Tbuex Airjgt Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm swing diameter 4500 mm turning height 1850 mm turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate Pgjdpfx Aisyz Db Ujret

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Pedpfx Aoxdmgveirsgt Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, WE OFFER AN VERY EXCELLENT CONDITION CNC LATHE PROTEO WITH TURNING MILLING Pgodsvk R Sgspfx Airot INCLUDING BAR FEEDER BOSS 332 E YEAR:2013 NEW AND TOOLS -ACCESSORIESS MAX BAR 25mm FAGOR OPERATION CONTROLS

Year of construction: 2023, condition: used, 2023 | Wheel Cleaner WEXC-13 | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41134 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Pgsdpfoznfdhjx Airst ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Lang Centre Lathe, Approx 7.6m Between Centres x 800mm Swing Over Bed, 400mm Swing Over Saddle, Fitted with 4 Jaw Chuck (750mm Diameter) , 2 Fixed Steadies Pgedpfxszvrn Ns Airot

Condition: excellent (used), Year of construction: 1985, functionality: limited functionality, Description Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Podpfx Aiovk E Aysregt Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Specifications Manufacturer HARDINGE Model HARDINGE TWIN SPINDLE LATHE QUEST 8/51 Year 2002 Description 2002 HARDINGE QUEST 8/51 CNC SUB SPINDLE, Pgsdpovk E Ddefx Airet DRIVEN TOOLING LATHE WITH GE FANUC SERIES 16I-T CONTROL 150mm Dia 3 Jaw Power Chuck. Collet Chuck Sub Spindle, 12 Station Turret. Quantity Of Static & Driven Holders. S/No. QC-28 (2002).

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Pgodez Apc Repfx Airjt Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Specifications Manufacturer MONFORTS Model RNC4 Year 1993 Description WE OFFER AN VERY NICE CONDITION MONFORTS CNC LATHE INCLUDING COMPLETE TOOLINGS DRAWERS FOR TOOLS MACHINE HAS LIVE TOOLS , DRIVEN TOOLS MACHINE IS CONECTED ON POWER TECHNICAL INFO: Diameter 420 mm Distance between centers 600 mm Psdpfx Aiovk E A Tjregt CNC system Control System F Tools 12 positions Cross travel 250 mm Longitudinal travel 620 mm Hole through spindle 65 mm Spindle speed 70 - 4000 RPM Motor power 18,5 HP Weight 7500 Kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, spindle speed (max.): 3,250 rpm, overall weight: 7,600 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Torque at 40% duty cycle (ED) max.: 630 Nm Torque at 100% duty cycle (ED): 420 Nm Number of tool positions in tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg MACHINE DETAILS Control system manufacturer: Siemens Spindle power at 40% duty cycle (ED): 33 kW Pgjdpfjz Apduex Airst Spindle power at 100% duty cycle (ED): 22 kW Electrical connection: approx. 50 kVA Mains connection: 400 V Frequency: 50/60 Hz Dimensions & Weight Dimensions with chip conveyor: approx. 5,300 × 1,900–2,200 × 1,700–2,000 mm Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor