Used Rausch Rs 6G for sale (6,833)

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. Gbodpfx Afev Rmvzeueu General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) Gbodpfx Aow Ighiefusu - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: refurbished (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 3615/673, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 3 mm/s, total length: 750 mm, total width: 800 mm, total height: 2,250 mm, -WR 177- Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3615/673 Year of Manufacture: 1988 Weight: 350kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, partially overhauled, mechanical vertical broaching machine Rausch RS 3 without CE marking Pulling force: 3,000kg Broaching speeds: 3m/min Return speed: 3m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / work area: 430mm x 320mm / 340mm x 220mm Table through-hole: Ø 90mm for standard broaching mandrels "System Rausch" Workpiece diameter: any (with the cabin removed) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with offset tool shank) Dimensions (h x w x d): 2,250mm x 800mm x 750mm (h = including 3-sided protective cabin) Motor: 3.0kw / Power supply: 400V / 50 Hz Equipment: - Protective door with safety monitoring (emergency stop circuit) - Chip chute - Externally adjustable tool length adjustment system (System Rausch) - Protective cover for stroke adjustment and electrical switching units - Electrical sensing of the clamping jaws (System Rausch) (Tool removal control to prevent unintentional retraction of the drawbar, providing additional safety for the operator & tool) - Integrated coolant system - 4-sided enclosed splash guard hood with protective door - Extra reinforced chip basket and chip sieve with magnet insert - Control panel external - 2 grease points for the trapezoidal spindle drive with manual grease gun directly on the spindle nut Gjdpfx Afsz Hl U Ieujbu Note: The machine has been partially overhauled by Rausch. The following wear parts have been replaced and renewed. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - New electrical system - 4-sided enclosed splash guard hood with protective door at the front - New protective door instead of the light barrier in the machine room - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve and spindle protection, are new. - External control panel General The double spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 18mm. (from 16mm keyway tools only with offset tool shanks) Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Due to the structurally universal design of the drawbar and the machine table, broaching with profile and flat broaching tools is possible without the use of additional draw heads.

Condition: used, functionality: fully functional, Manufacturer: Rausch, as well as other manufacturers Godpfx Ajz Nyniofujbu Diameter: 90 mm, suitable for Rausch vertical reaming machines RS 3, RS 4, RS 6. General / technical data: Well-maintained, used reaming mandrels suitable for use with flat reaming tools on Rausch reaming machines of the RS 3, RS 4, RS 6 series. Remarks: We have a large stock of well-maintained, used reaming mandrels for Rausch vertical reaming machines.

Condition: ready for operation (used), functionality: fully functional, Cable pulling machine / RAUSCH RS 6 /1300 with pulling extension & accessories -Ram stroke / stroke length - Standard 1300 mm (+ pulling extension) -Pulling force 6000 kg -Various cable pulling tools -Various accessories -Workbench Godpjz I Dbvsfx Afujbu Dimensions (disassembled) L x W x H 1.6 x 1.7 x 2.3 meters / Weight 3500 kg Errors and omissions excepted.

Condition: ready for operation (used), Pulling machine RAUSCH RS 6-1300 with extensive accessories -Ram stroke / pulling length 1300mm -Pulling force 6000kg -Incl. 38x clearing pins -Incl. 95x guide bushings -Work bench -Setting plates -Crane -Platform -2x tool cabinets Gedpfxeza U Alj Afuebu Dimensions: L x W x H 1.6 x 1.7 x 2.3 meters / Weight: 2500kg Errors and omissions excepted.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Gjdpfx Asw H Dgnofuobu Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Gbjdpfsytvyxox Afueu Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 60213/674, input voltage: 380 V, input current: 15 A, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, -WAG 893- For sale is a Rausch RS6/1000 internal demolition machine. Gbsdpfjzvwlyox Afuou Manufacturer: Rausch Type: RS6/1000 Year of manufacture: 10/1987 Machine no.: 60213/674 Weight: approx. 800 kg Tractive force: 60 kN Further information will be added shortly...

Year of construction: 1962, condition: good (used), machine/vehicle number: 1083, Broaching Machine - Vertical Manufacturer: Rausch Type: RS10/915 Machine number: 1083 Year of manufacturing: 1962 Force: 10 Tons Stroke: 915 mm System DIN 1415 With pedestal for upper-floor positioning Gjdpfx Aefc T Eusfuobu

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 60305, General / technical data: Manufacturer: Rausch Gjdjiqkb Repfx Afusbu Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Year of construction: 1978, condition: good (used), machine/vehicle number: 6006/478, Broaching Machine - Vertical Manufacturer: Rausch Gbjdpfx Asfc T E Aofuju Type: RS8/1300 Year of manufacturing: 1978 Force: 8 Tons Stroke: 1.300 mm Weight: 0,92 Tons

Year of construction: 1992, condition: good (used), machine/vehicle number: 662681751, Broaching Machine - Vertical Gsdpfsfc T Edjx Afuobu Manufacturer: Rausch Type: RS6 / 1300 Machine number: 662681751 Year of manufacturing: 1992 Type of current: 3N ~ 380 Volt/50 Hz Connected value: 7,1 KW Ampacity: 17 Ampere Weight: 810 kg Circuit diagram number: RS6 – 39 With aggregate Size table: 520mm x 320mm

Condition: ready for operation (used), Vertical – Rausch Milling Machine Type RSIZ 6 / 1000 S Condition: Used Technical data: Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Return speed: 10 m/min Internal milling: largest workpiece diameter 600 mm External milling: area of the clamping plate 600 x 340 mm Coolant system Traction force measuring device Central lubrication, automatic Spindle protection with coil spring spirals Chip conveyor Cycle counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Self-collection or shipping by freight forwarder. We will gladly assist you in organizing cost-effective shipping. You are welcome to visit us for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. The machines and tools are sold as is. Gjdpfx Afodyp Rmjujbu The assembly and electrical connection of the machine/device must be carried out or checked by a qualified specialist. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 1960, condition: good (used), machine/vehicle number: 758, refitted Force: 2 to Stroke: 1000mm Gbsdsbrcmhopfx Afuou

Year of construction: 1985, condition: good (used), machine/vehicle number: 20236, Pulling-force: 10 to Stroke: 1500 mm 1 Broaching Station Weight: ca. 1800 kg Power-Input: 9,5 kw/380V With part and chip-convejor (mechanical) Gedpfx Asbrcmrofusbu

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Gbedpfx Afev Rpnmeueu Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector Gbodpfszy Satjx Afueu - automatic mode

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Gbodpjz I Tt Ijfx Afusu Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Year of construction: 2014, condition: ready for operation (used), A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible. Gjdpfjyxq Uiox Afujbu

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Gbsdpfx Afjwmw Dajusu

Condition: refurbished (used), functionality: fully functional, Year of construction: 2010, 1 x used & fully reconditioned cross-cut saw Manufacturer: Rima System Model: RS 36 S Year of manufacture: 2010 Gsdpfxjz Rvzus Afuebu Condition: fully reconditioned & ready for production, with warranty Delivery time: approx. 5-6 weeks The pictures show the machine in its current condition. The machine will be thoroughly inspected, fully reconditioned, and extensively tested in our workshop.

Condition: used, mileage: 26,283 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: air, total width: 23,500 mm, total height: 27,000 mm, Year of construction: 2005, Equipment: ABS, EBS, For inquiries regarding the vehicle, Mr. Seidel is at your service (Tel. ...). Gbsdoyfpnyjpfx Afusu LE 9.150 4x2 BB Equipment Vehicle Cruise control, engine brake, ABS/ASR/ESP, differential lock, halogen headlights, revolving beacons, air horns, tire tread: 1st axle 9-10mm, 2nd axle 16mm, permissible total weight: 9,500 kg. We will be happy to provide you with a leasing or financing offer upon request. Mr. Seidel (Tel. ...) will gladly assist you. Further information can be found on our website. ... Errors, changes, and prior sale reserved!!! ESP Cab type: Local distribution traffic = Further information = Suspension: Air suspension Engine displacement: 4,580 cc GVW: 9,500 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2016, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 32 A, The RISCO RS 5000 filling machine has been unused for a year but was fully functional until then. It requires a technical inspection. Gjdpfsz Hixwex Afuebu

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1394002, We are offering this ready-to-use Risco RS 1300 paddle mixer with a tipping mechanism for sale. Model: RS 1300 The paddle mixer is fully functional and can be inspected at any time. If you have any questions or require further information, please feel free to send us a message or call us. Gjdpfx Afoz Nnmyeusbu