Used Rw Recycling World Gmbh Sievemachine for sale (74,386)

Condition: new, Year of construction: 2026, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Kdjdpfx Agjdwqiue Aeu Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters.

Condition: good (used), Year of construction: 2010, Item: Disintegration mill Type: Tyre shredder Kjdpfjx U Dvlox Ag Aedu Input material: Car tyres, sports flooring Required particle size: Pre-shredded to max. hand size / < 100 mm see PDF

Year of construction: 2026, condition: new, To sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable. Kjdpfx Aechb Ryeg Aedu

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: Ksdsznz Ezopfx Ag Aedu • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Year of construction: 2026, condition: new, Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: Kedpfx Aochb Rusg Aedu 1. What material you want to separate? 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Condition: new, Year of construction: 2026, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, nuts, etc. see PDF. Kdsdpfsbbr Iiex Ag Aeu Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Year of construction: 2026, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation 0,1-18mm freely. selectable. Kdodpfsbcnatox Ag Aou

Year of construction: 2026, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Kjdpfxebcngio Ag Aodu Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation < 18mm freely selectable.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm. Kdedpfsbbr Ipjx Ag Aou

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Kdedpochb Sbofx Ag Aou Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: new, Year of construction: 2026, The system can be loaded onto a truck with a forklift and is ready for operation in just a few simple steps. A 16A socket is required. Total dimensions of the system LxWxH 3.5 x 1.06 x 2.98m (ready for operation) Precondition for the separation are differences Kdsdpsfrugkjfx Ag Aou in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm-30mm, (bigger particles are possible with a special design)

Condition: like new (used), operating hours: 185 h, functionality: fully functional, warranty duration: 12 months, power: 140 kW (190.35 HP), INVENTORY SALE Features: - Dust suppression - Increased feed area - Flat base plate on a tracked chassis Kdjdpfx Aotwmnneg Aou Application: Classification of pre-shredded waste wood (see German waste wood classes: A1-A4), primarily as a mixed fraction, with foreign material – ideal for thermal recycling, offering full flexibility in operation. Density: 200 - 300 kg/m³, Moisture content: < 30 %, Length: max. 500 mm

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition Kdedpow S Iiisfx Ag Asu - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final - Only 980 operating hours

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1106240, usable tank capacity: 80 l, total length: 8,200 mm, total width: 2,240 mm, total height: 2,400 mm, overall weight: 12,000 kg, operating pressure: 250 bar, input voltage: 400 V, ## BRT Recycling Technologie SCHLITZ-O-MAT MSW 1-17 – Bag Opener with Feed Hopper For sale is an industrial bag opener from BRT Recycling Technologie GmbH, model SCHLITZ-O-MAT MSW 1-17, manufactured in 2006, including a feed hopper with a hydraulic push-floor discharge system. The machine comes from our existing recycling and sorting plant and is being offered for sale due to a comprehensive plant modernization. The SCHLITZ-O-MAT was designed for the continuous opening and emptying of filled bags and is particularly suitable for use in recycling and waste sorting plants. The hydraulically driven opening system with tearing fingers opens the bags, largely empties them, and feeds the material for further sorting. ### Technical Data – Bag Opener - Manufacturer: BRT Recycling Technologie GmbH - Model: SCHLITZ-O-MAT MSW 1-17 - Year of manufacture: 2006 - Machine No.: 11 06 240 - Working width: 1,700 mm - Drum diameter: 1,000 mm - Drive: Electro-hydraulic - Drive power bag opener: 15 kW - Maximum hydraulic pressure: 250 bar - Hydraulic tank: 250 liters - Electrical connection: 3 × 400 V / 50 Hz - Protection class: IP54 ### Throughput according to manufacturer Depending on the material density: - 5 t/h at 50 kg/m³ - 10 t/h at 100 kg/m³ - 20 t/h at 200 kg/m³ - 30 t/h at 300 kg/m³ Kedpfx Agoz R Rcno Aedu The actual throughput depends on the material composition and operating conditions. ### Feed hopper with push-floor discharge The scope of supply includes the associated feed hopper with a hydraulic CARG-O-MAT push-floor conveying system. - Hopper volume: approx. 18 m³ - Hopper length: approx. 6,000 mm - Hopper width: approx. 1,714–1,830 mm - Discharge height: 2,390 mm - Conveying speed: max. 1.5 m/min, infinitely adjustable - Drive power: 4 kW - Hydraulic drive ### Dimensions and weight – complete system - Length: approx. 8,800 mm - Width: approx. 2,600 mm - Height: approx. 2,400 mm - Total weight: approx. 11,000 kg - Electrical connection power: approx. 20 kW ### Additional information The machine is characterized by its robust industrial design and the hydraulic bag opening system. The material outlet automatically adjusts to different bag fill levels and varying material quantities. The machine is being offered for sale as part of the restructuring of our existing recycling plant. An on-site inspection in Munich is possible after prior appointment. Technical documents and further information can be provided upon request. If you are interested or have any questions, please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Kjdpfxexy Rdds Ag Ajdu

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Kodpfx Agjxy E Evs Aodu Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: used, Year of construction: 2017, operating hours: 30,000 h, 1 Bending and welding system, BMW tension strut, manufacturer: STEPP Fabrikationsautomations GmbH & Co. KG, year of manufacture: 2017, power connection: 400V, 50Hz, 200A, nominal pressure: 6 bar, dimensions (L x W x H): 10m x 6m x 2.6m, weight: approx. 16t, pneumatic components are primarily used for clamping and alignment, hydraulic drive is mainly used for direct processing, such as hole punching, 3 robots, manufacturer: Yaskawa, type: 1x YR-MH00024-A00, 2x YR-MA1440/MH12-A00, for transfer and welding operations, servo drives are used for transfer, control system: Siemens 1516-3, machine hours: 30,000, average utilization: 85%, last documented maintenance: 02/16/2024, system generally operational, rework has been carried out. Kdodpfo Aaw U Tox Ag Asu

Year of construction: 2003, condition: used, Technical details: operating pressure: 10 bar voltage: 400/50 V/Hz control voltage: 24 V total power requirement: 0,76 kw weight of the machine approx.: 160 kg dimensions L x W x H: 0,58x0,68x1,35 m heat exchanger application area: transportation of heat energy from a medium to another medium (liquid or gas) connections 3/4" for flow/return 2x both sides 2 Pieces available Kdedeu N Afgopfx Ag Aju *

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), feed hopper Kdsdpfx Aozhg Eysg Asu

Condition: used, Year of construction: 2019, operating hours: 25,600 h, 1 Skoda production line, manufacturer: STEPP GmbH & Co. KG, year of construction: 2019, mains connection: 400V, 50 Hz, nominal pressure: 6 bar, dimensions (L x W x H): 12m x 8m x 2.6m, weight: 16 t, enclosed robot cells, the system is used for the production of hood hinges for Skoda vehicles, raw material is transferred and riveted between different stations, 4 robots, manufacturer: Yaskawa, type: 2x YR-HP20R-B2C, 1x YR-HP20-B00, 1x YR-1-06VX7-A00, machine hours: 25,600, average utilization: 85%, last documented maintenance: 02/12/2025, the system is generally operational, rework has been carried out. Ksde Aaxgdjpfx Ag Asdu

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Kdsdpfx Ajx R Uzdog Asu Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 32 h, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 400 mm, conveyor belt speed: 4,000 mm/s, total width: 1,060 mm, total height: 1,800 mm, overall weight: 350 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 10 A, Equipment: documentation/manual, emergency stop, Inside width: 400 mm Length: 2000 mm Driving power: 3 kW Kodpfxsxuq Dgo Ag Ajdu Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Kdjdexy Idhopfx Ag Aju Available immediately

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Kjdpfx Aoxy Iikog Ajdu Available immediately

Condition: new, functionality: fully functional, power: 140 kW (190.35 HP), INVENTORY SALE Ksdpfxjwylyio Ag Aodu Housing: Standard Chassis: Tracked chassis, max. 1.0 km/h Color: RAL 5003 | RAL 7047 | RAL 7016 Engine: Perkins 1204J Power: 140 kW Emission stage: EU Stage V Hydraulics: Electronic mobile control Hopper: Standard Conveyor belt - Finished grain: Belt width 800 mm Conveyor belt - Oversized grain: Belt width 800 mm Cooling: 3-circuit, incl. CleanFix spiral fan Operation: 6.5" panel, incl. CANBUS Remote control: 4-button & joystick wireless remote control Central lubrication: Mechanical Toolbox: 1x incl. Fire extinguisher: 1x incl.