Used Schleich Glp2-E Safety Tester, Insulation Testing Device Glp2E, Test Device Glp2 for sale (89,354)

Condition: used, Schleich GLP2-E Safety Tester, Insulation Tester GLP2E, Test Device GLP2 Item condition: Used, in perfect condition Pjdjivd I Sopfx Ai Torc You can find more test equipment – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface Prjdpfjxqxt Iox Ai Toc - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: new, Device Tester ST 710, 2500 test objects / with testing device / test lead L270 x W115 x H55 mm · For safety testing of electrical devices/tools, such as power tools, motor-driven equipment, luminaires, extension cords, and household appliances according to DIN VDE, DGUV regulation 3 · Simple operation via three buttons · The complete test can be carried out independently of the mains power within 10 seconds Prsdpe Ab Dk Rofx Ai Tjc · Automatic test sequence for devices of class I, II (III) · Measurement of insulation resistance, protective conductor resistance, protective conductor and touch current according to the substitute leakage current method · Cable test including RPE and RISO · Continuity and short-circuit test of the phase/neutral conductor · Voltage at external protective contact socket (L-N, L-PE, N-PE) · Three-phase test objects can be tested using an optional measuring adapter (measuring adapter is not included in the scope of delivery) · Limit values according to VDE standard are pre-set. Special product advantages: Graphic display, automatic test sequence with pass/fail indication, battery capacity for 2500 test objects, free download of test reports (Excel, PDF) at · Further technical specifications: Width: 115 mm · Length: 270 mm · Height: 55 mm Width: 115 mm Height: 55 mm Length: 270 mm Model: ST 710

Condition: new, Device Tester ST 725, battery/mains operation, L270 x W115 x H55 mm, BENNING · Suitable for electrical engineering, industry, maintenance, service, and municipalities (easy to use, for battery-powered and mains-powered tests). Application areas: testing devices with mains voltage-dependent switching elements/power supplies/relays, such as electronically controlled devices/tools. · Devices in information and communication technology, as well as devices that can only be fully tested with mains voltage, according to VDE 0701-0702, DGUV regulation 3, ÖVE/ÖNORM E 8701, NEN 3140. · Measurement value memory for 999 test objects, readable via Micro-USB interface. · Download software for creating test reports in MS Excel. Prsdpfx Aio Ab Dkqj Tsc · Direct test report creation via serial interface and optional printer BENNING PT 1. · Integrated real-time clock for storing measurement values with test date. · Fast (testing within seconds), complete (device tester and RCD tester in one device), unique (testing of 1- and 3-phase devices under operating conditions). · Automatic test sequence with pass/fail indication for devices of class I, II (III) and conductor test. · Active testing of 3-phase devices under operating conditions (optional measuring adapters). · Limit values according to VDE standard preset. · Battery capacity for 2500 test objects. · Weight: 950 g. Measurements: protective conductor resistance (200 mA test current with polarity reversal), insulation resistance (250 V/500 V test voltage), testing of 30 mA RCD/PRCD protective devices (tripping time at 1 x and 5 x rated current), voltage at external protective contact socket. Mains operation: protective conductor/touch current via differential current/direct measurement method with automatic mains polarity reversal. Battery operation: protective conductor/touch current via equivalent leakage current method. · Other technical specifications: width: 115 mm, length: 270 mm, height: 55 mm. Model: ST 725

Condition: used, Multifunction Safety Tester KT 1880B Multifunctional Safety Tester KT 1880B – Test Automation in 6 U The KT 1880B is a compact safety tester in a 19" rack-mount format (5 U) and combines all relevant test types in one device: high-voltage testing (AC/DC), protective conductor testing, insulation testing, touch current testing, functional testing, and continuity testing. This enables the KT 1880B to meet the requirements for efficient, safe, and standards-compliant safety testing according to IEC, EN, UL, VDE, and other international standards – ideal for final testing, production, and quality assurance. Technical Performance Data - AC High-Voltage Test: 100 - 5,500 V / 0 - 3 mA - DC High-Voltage Test: 100 - 6,000 V / 0 - 10 mA - DC Insulation Measurement: 100 - 6,000 V / 250 kΩ - 1 GΩ - AC Protective Conductor Test: 10 - 30 A / 0 - 400 mΩ - AC Touch Current Test: 100 - 270 V / 0 - 10 mA - DC Continuity Test: 24 V / 0 - 600 mA - Function Test / Current Consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) - Wide-Range Power Supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Use Predpjzwlfwofx Ai Toc Thanks to the integrated 4.3" TFT color display with intuitive menu navigation and freely configurable test programs, the KT 1880B enables a fully automated test sequence. The device under test only needs to be connected once – no re-wiring is required. This significantly reduces test times and potential sources of error, making it a clear advantage, especially in automated production environments. Standards Compliance & Operational Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the requirements of EN 50191 for current-limited devices. As a result, it can also be operated by non-specialist personnel – ideal for companies with mixed testing staff structures. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results – even with demanding test cycles and under production conditions. Typical Application Areas - Series production & final testing - Type testing according to international safety standards - Production of electrical devices, components & modules - Automated testing environments & test benches Flexibility, Safety & Automation Combined The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test types, fully electronic high-voltage technology, intuitive operation, and current-limited design, it meets all the requirements for modern test automation. Safety Tester KT 1880B Year of Manufacture: 2025 Manufacturer's Price: €6,545.00 (including VAT) Calibration: March 6, 2025 Remaining warranty available Accessories A3/1800-K Connection and Control Panel + CEE16 Manufacturer's Price: €1,318.00 (including VAT) Knürr TW 05 Mobile Device Cart, pre-assembled with: HL 02 Holder for High-Voltage Test Probes SP 02 / SP 03 HL 81 Holder for Protective Conductor Test Probe PE 81-i KH 01 Cable Holder Manufacturer's Price incl. Accessories: €3,300.00 (including VAT) Test Probe SP02 + SP03 Manufacturer's Price: €521.00 (including VAT) Protective Conductor Test Probe PE 81-i Manufacturer's Price: €311.00 (including VAT) SPS D 2012 Test Dummy Manufacturer's Price: €711.00 (including VAT) Rack-Mount Housing EH 1905-y Manufacturer's Price: €653.00 (including VAT) Warning Light Set with LED WL25 Manufacturer's Price: €327.00 (including VAT) "Everything from one source: We are happy to offer you a suitable ba

Condition: ready for operation (used), Reicherter Wolpert Hardness Testing Machine / Hardness Tester Manufacturer: Reicherter Model: Briro VA II Test Loads: 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf Manufacturer: Wolpert Model: Dia Testor 2n Psdpfjx U Tlvex Ai Torc Throat Depth: 150 mm Test Area Height: 300 mm Brinell (ISO 6506): 5 / 10 / 15.625 / 30 / 31.25 / 62.5 / 187.5 / 250 Vickers (ISO 6507): 5 / 10 / 20 / 30 / 40 / 50 / 125 Accessories: See photos for details You are welcome to come for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Requirement: a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are the property of their respective owners and are used only for identification and description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: new, Professional test cover (prufhaube) from the renowned German manufacturer SCHLEICH – model 13-R2. The device is designed for laboratory and industrial use, ensuring maximum safety during high-voltage electrical testing. The unit is in factory-new, warehouse condition – it has never been used. ⚙️ Technical specifications: manufacturer: SCHLEICH (Germany) model: 13-R2 type: test cover / prufhaube year of production: 04.2023 serial number: 21942 country of origin: Germany ✅ Key features: professional test zone (“forbidden zone”) transparent cover – full process control safety system (locks / sensors) Prodjz Smwdepfx Ai Tsc robust industrial construction high manufacturing quality – made in Germany ideal for HV/electronics/production testing 📦 Condition: New – warehouse stock, unused. May have minimal storage marks. 📸 Included: device as shown in the pictures

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Predpfx Aiozzynho Tec Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change. Prjdpfx Aeytn Hkoi Tsc

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. Pjdpsz Slxmofx Ai Torc The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt Prjdez Slxgspfx Ai Tec The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Psdpfx Aiezhub As Terc Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Pjdpfxjz Snf Ns Ai Terc Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: used, Automation Assistant Oy Linear Guided Free Fall Tester Automation Assistant Oy LG2750 Professional linear guided free fall test stand for reproducible drop and impact tests For sale is a used Linear Guided Free Fall Tester from the manufacturer Automation Assistant Oy. The test stand is suitable for reproducible drop and impact tests in research, development, quality assurance, and industry. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Machine type: Linear Guided Free Fall Tester Made in Finland Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: Concrete garden brick 300 × 300 × 50 mm Dimensions (approx.): Width: 850 mm, Depth: 900 mm, Height: 2750 mm Total weight: approx. 210 kg Test tower: approx. 155 kg Impact table: approx. 55 kg Equipment: Touchscreen control panel Enclosed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Accessories as shown in the pictures Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Scope of delivery: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Condition: Used Prjdpfx Aiezn Uqds Tjc Visual condition as shown in the pictures. Normal signs of wear and tear due to age. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Psdef Axn Aopfx Ai Torc Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Condition: used, High-voltage tester, high-voltage test device, high-voltage tester for HV, PE, IS measurement Test console, test station, measuring station, test device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The device PE/IS/HV / 91-3J.3 is used to measure voltage strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Noise suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame Prodpfx Aied Dc Une Tsc - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57820 and 57821.

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Insulation Tester Fluke 1555, 10KV Predpfx Asxr A Rtoi Tec Digital insulation measurement up to 10 kV, ideal for testing a wide range of high-voltage installations.

Condition: new, IT 130 Installation Testing Device for electrical system testing, BENNING · Suitable for electrical engineering, industry (safety testing of electrical systems up to 1000 V), initial commissioning, periodic testing, fault finding, logging, photovoltaics · Multifunctional installation testing device for testing electrical systems according to DIN VDE IEC 60364-6 and DIN VDE EN 50110 · Includes testing of RCD/residual current circuit breakers type B/B+ (all-current sensitive) and type AC, A, F (mixed frequencies) Measurements: Low resistance (200 mA with polarity reversal), continuity (7 mA), insulation resistance (50 V/100 V/250 V/500 V/1000 V) · Line impedance (L-N/L) with voltage drop and short-circuit current · Loop impedance (L-PE) without RCD tripping and short-circuit current · Testing of RCD/residual current circuit breakers, standard and delayed (S) (type AC, A, F, B, B+ with AUTO test, touch voltage, tripping time and tripping current (ramp)) · TRUE RMS voltage · Frequency, phase sequence, first fault leakage current in IT systems Measurements via optional accessories: Earthing via 3-wire method with BENNING earthing kit (044113), Art. No. 4000 828 913, TRUE RMS current via current clamp adapter BENNING CC 1 (044037) · BENNING CC 3 (044038), Art. No. 4000 828 918 Special product advantages: Measurement value memory with 4 levels (object, block, circuit breaker, measuring point) · Upload of system structures, download of measurement values · Integrated real-time clock (measurement value with date/time) · Bidirectional interfaces (USB/RS 232) · Clear pass/fail indication via green/red LED on the testing device and on the switchable Commander test probe · Commander test probe with TEST and STORE buttons as well as a bright LED measuring point illumination · Connection for barcode scanner to identify the measuring point and rename the memory location Pedpfx As Ab Dl Isi Torc · Graphic display with backlight · Help function with wiring diagram · Online voltage monitoring · Battery charging function integrated in the device · PC software BENNING PC-Win IT 130: Creation and transfer (upload) of system structures to the BENNING IT 130 for efficient periodic testing · Measurement value download and logging (test report, ZVEH test report)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, Works, selling because we needed a digital one. Prsdpfx Aisz Ellkj Tsc

Condition: used, GBS Prüfpuls rev3 Pulse generator for long-term insulation tests The Prüfpuls unit is designed for long-term insulation tests on test specimens with a capacity of up to 6 nF. Converter for high-voltage test transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation 16-24 kHz of the sine wave via a full bridge. · Converter voltage adjustable from 0-600 V, Imax = 2.6 A, maximum power 1.3 kW · Pulse current limitation 110 A (shutdown threshold) Pulse transformer – drive Prjdpfxsu Egz Ro Ai Tec · Drive via a full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limitation 100 A (shutdown threshold). · Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductances 150 μH, 300 μH, to adjust the pulse width or rise times to the load capacity and voltage. · Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-stage cascaded circuit. · Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. · Maximum output voltage 15 kV with possible load capacities of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · Voltage divider 1:1000 in parallel. · Overvoltage protection at approx. 20-23 kV by parallel spark gaps · Thermistor for over-temperature detection in the 1st transformer stage. · Earth-side current measurement socket 100 mV/A. Breakdown detection, testing · If the maximum bridge currents for the transformer drive or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hour counter to determine the test time. Manufacturer's price approx. €59,500 More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 Pjdpfx Asyfmm Tji Tjrc You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Storage location: Shelf 1

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Psdpfx Aioz H Uklj Tjrc Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: new, Insulation/Resistance Meter IT 101, 0.1 V - 600 V AC/DC, 1 kΩ - 20 GΩ, BENNING · Suitable for electrical engineering, industry, service, maintenance, and troubleshooting · For insulation and low-resistance measurements on electrical systems, devices, cables, motors, and generators · 4-digit illuminated LCD display (4000 counts) with bar graph · Limit values for ISO measurements can be selected · Green LED for pass, red LED for test/foreign voltage · Switchable test probe to trigger the measurement process · Internal memory · TRUE RMS voltage with low-pass filter · Automatic discharge of capacitive voltages · CAT IV 600 V Measurement ranges: Insulation resistance: up to 20 GΩ, test voltage: 50 V, 100 V, 250 V, 500 V, 1000 V), calculation of the resulting leakage current · Low resistance: up to 40 Ω (with 200 mA test current for testing protective conductor connections) Polarization index (PI), dielectric absorption ratio (DAR), voltage 600 V · Resistance: 0.01 Ω - 40 kΩ · Other technical specifications: Width: 95 mm · Length: 207 mm · Batteries: 4 x Mignon Type AA · Low-resistance resistance: 0.01 Ω - 40 Ω · Resistance: 0.01 Ω - 40 kΩ Psdpfx Aio Ab Dlbj Terc · Insulation resistance: 1 kΩ - 20 GΩ · Voltage: 0.1 V - 600 V AC/DC · Measurement value memory: 500 measurement results · Height: 52 mm · Display: 4,000 digits (illuminated) Width: 95 mm Length: 207 mm Height: 52 mm

Condition: new, Height safety device, EN 360, galvanized steel cable, 18m, MAS · EN 360 · Housed in a plastic casing with swivel suspension and wire rope; used for work on high-rise structures, chimneys, or silos. · Should ideally be attached overhead to ensure proper functioning. · The wire rope automatically extends from the robust housing and retracts during descent. Podpfs Abyvcsx Ai Tjrc · Due to the short braking distance, no additional fall arrest system is required. · These products are tested and approved for vertical and horizontal applications, taking into account the expected load from a fall over the edge. · Other technical features: Material: Plastic · Connecting element for the attachment point on the harness: Automatic carabiner made of aluminum · Weight approx.: 6.3 kg Length approx. m: 18 Standard: EN 360

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Podpfx Aieu N Avxo Tsrc Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *