Used Schraml Vertical Glass Drilling Machine, 1300 Mm for sale (99,654)

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Gedpfx Aijyfrvyoxoka Very good and clean condition Surplus drilling/countersink bits included As is Available immediately

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical glass washing machine Maximum working height: 1300 mm Open top Working direction: from left to right Gkodpfx Aey Uhmujixsa 4 brushes (2 pairs) Glass thickness: 4 - 12 mm More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested As is Available immediately See video

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Gkjdpsh Ek H Ssfx Aixoa Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Gksdpfjy Nltnjx Aixoa Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Vertical glass washing machine Working height: 1500 mm Open top Glass thickness: 2 - 13 mm Working direction: from right to left Washing machine consists of: - 2 brushes (1 pair), - 2 pcs. of air knives, - 1 stainless steel water tank separated in 3 parts (1 part with water heating), - motorized inlet and outlet conveyors, - outlet conveyor is with inspection lamps. The speed of movement of the conveyor is regulated by inverter Gkedpfxjy Na Rnj Aixea Total floor dimensions: L 4900 x W 1500 x H 2650 mm Very good and clean condition Good working order, tested See video As is Available immediately

Condition: excellent (used), Year of construction: 2016, MBR RADOVANOVIC WSR-27 Maximum glass height: 2700 mm Working direction: from left to right (L-R) PLEASE NOTE Machine excluding inlet and outlet conveyors Very good and clean condition Good working order Available immediately Gjdpfx Aoq Ih Nyeixjka

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Gkodpfew Nytnex Aixja Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, overall weight: 520 kg, We offer this used Bottero 710C glass drilling machine, manufactured in 2013. Model: 710C Gkodpfxezmwrnj Aixsa Serial number: GG710C-20596 Year of manufacture: 2013 Voltage: 400 V Frequency: 50 Hz Rated current: 8 A Weight: 520 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, functionality: fully functional, spindle mount: MK 5, drilling depth: 315 mm, height adjustment type: hydraulic, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 500 mm, table length: 630 mm, overall weight: 3,500 kg, arm reach: 1,600 mm, For sale: ZJ Z3050×16/1 radial drilling machine. Robust radial drilling machine for drilling, reaming, countersinking, and tapping larger and heavier workpieces. Thanks to the long radial arm, the drill head can be positioned flexibly above the workpiece without the component needing to be constantly moved or re-clamped. This machine is equipped with hydraulic clamping for the arm, column, and drill head. The combination of the heavy-duty construction, the wide working range, and the mechanical 16-speed and feed control makes it suitable for maintenance work, structural work, machine construction, and general metalworking. The machine is being sold due to a restructuring of the production facility. It is offered in used condition, as shown in the photos. Inspection and, if desired, a functional test are possible by appointment in Kuurne, Belgium. The vice, clamping devices, and other accessories visible in the photos are only included if this is expressly agreed upon. Gedpozhbtrjfx Aixska

Condition: good (used), Year of construction: 1991, Glass drilling machine with table (extendable) 1. Width: 900 mm 2. Width: 1800 mm / with arms extended Height: 1600 mm Depth: 1200 mm Gjdpfozfhd Eex Aixoka Condition: good, second-hand

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Gkodpfxoy At Iyj Aixsa Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Gksdpfxjzb A Rge Aixoa

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis Gsdpfx Asv A Uw Doixeka 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Gksdpfjnzt A Hox Aixsa Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Gedpsfbt Huefx Aixoka Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: refurbished (used), Lower and upper drill, tiltable, for chair seats of Old America type or similar products Godeytr Edepfx Aixjka no. 4 independent lower groups, tiltable No. 2 upper vertical oscillating groups

Condition: used, Comec 3-spindle vertical drilling machine Maximum piece length 100 cm Godpfxsy S Adis Aixjka

Condition: used, Year of construction: 2010, machine/vehicle number: GG710C-18759, functionality: fully functional, input voltage: 400 V, input current: 8 A, type of input current: three-phase, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, overall weight: 850 kg, drill diameter: 140 mm, pressure: 6 bar, spindle speed (min.): 3,800 rpm, One semiautomatic glass drilling machine, with two opposite heads available in 03-2026 (still in production). Max sheet size: 2600x1350mm. Min sheet size: 80x80mm. Max tool diameter: 140mm. Glass thickness from 1.8 to 55mm. Spindle speed: 3800rpm. Gkjdjyc Egyepfx Aixja

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 5976/07, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, total width: 1,850 mm, total length: 2,500 mm, total height: 1,750 mm, overall weight: 420 kg, drill diameter: 130 mm, pressure: 6 bar, working height: 1,000 mm, Equipment: documentation/manual, RBB Trapano double-sided drilling machine, technically refurbished at our Belgium warehouse. Includes a set of used tools, see picture. Godpfexg Ngqsx Aixeka

Year of construction: 2016, condition: excellent (used), functionality: fully functional, For sale the vertical glass washing machine QUARANTA S.r.l Type: LV 4 2000 3-50 Year: 2016 Very good working condition Working height 2000 mm, open-top , 6 brushes Gkodsy Azi Eepfx Aixja glass thickness: 3 - 50 mm Machine body in stainless steel, mechanical parts in aluminium, brass and galvanized steel. Drying by 4 blowers. Hot air. Soundproof built-in fan.

Condition: new, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, overall weight: 7,300 kg, The FEELER VMX 1300 Vertical Machining Center is a new machine designed to deliver precision and efficiency in complex machining processes. It is equipped with a FANUC 0i-MF PLUS CNC control and a 10.4-inch screen, providing advanced control and user-friendly operation. The machine has a total weight of 7,300 kg and features a working table measuring 1,420 × 600 mm, capable of supporting up to 1,500 kg/m². The travels on the Y and Z axes are 610 mm and 600 mm respectively, ensuring a wide range of movement for various machining applications. For operation, the VMX 1300 requires an air pressure between 6–8 bar and has a power requirement of 30 kVA. These specifications make this machine a robust and reliable choice for machining workshops seeking high production capacity while maintaining product quality. Gkodjxgpt Rjpfx Aixja

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine with extendable roller table 700 mm machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm Godpfjyub Azox Aixeka

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Gedpfx Aoxd Ruwjixska Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: good (used), Year of construction: 1995, Electrical connection rating: 1.75 kW 380/220 V/ 5.2 A Total length with side tables: approx. 2520 mm Depth max. approx. 1170 mm Gsdpfxjxrp Nij Aixoka Height max. 1550 mm

Condition: good (used), Year of construction: 2013, Work table can be extended by an additional 700 mm on both the left and right sides Gkedow Sdwispfx Aixoa Width: 1850 mm Height: 1800 mm Depth: 1200 mm