Used Stoiber Gmbh Stostack 5000 - Lagenstapelung for sale (70,427)

Condition: new, Year of construction: 2026, Board Stacking System: Manufacturer: Stoiber GmbH Model: StoStack 5000 – Layer Stacking Condition: New Price & Location: Price on request Ljdetv E D Uspfx Am Njaa AT – 4122 Arnreit Description: Universally applicable board stacking system for the efficient stacking of rough-sawn boards, posts, battens, and planed goods. Advantages of the system: • Fully automatic, flush stacking • Air gap stacking • Simple operation via touchscreen • No pneumatics, ensuring unrestricted operation even in freezing conditions Technical data: • Flexible stacking width: up to 1,200 mm • Stacking height: up to 1,200 mm • Board length: from 1,500 mm • Board/post width: 50 – 300 mm • Board/post height: 15 – 120 mm • Maximum board/post weight: 75 kg • Maximum layer weight: 500 kg • Cycle rate: up to 25 pieces per minute Options: • Alignment rollers for longitudinal orientation of sawn timber • Ejector for removing defective boards • Electrically adjustable side supports • Mobile machine frame: Use at multiple workstations by moving the machine on rails or with a forklift

Condition: new, Year of construction: 2026, Machine designation: Gantry Nailing Machine for Pallet Production Manufacturer: Stoiber GmbH Model: StoNail 3000 Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit, Austria Description: • Semi-automatic gantry nailing machine for producing various types of pallets and crate components. • For loading loose blocks and boards, either a flexibly adjustable clamping system or a wooden template wall is available to ensure minimal setup times. • Divided into two work zones, the operator alternates between working on the left and right sides of the machine. • The nailing bridge can be equipped with up to 8 nailing units using jumbo coil nails (approx. 8,000 nails). By simultaneously activating the nailers, this machine achieves very short production cycles and high output rates. Laedsralk Ropfx Am Nea • Operation and programming of new pallet types is performed via a touch display. Existing programs can be accessed from memory at any time. Manual teach-in of nail positions is not required! • NEW – Robot for pallet stacking Technical data: • Max. pallet size (standard): 2,500 x 1,700 mm per side • Max. pallet size (optional): 3,500 x 1,700 mm per side • Max. nail length: 90 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 - 600 pallets/8 h • Machine operators: 1 – 2 persons • Low operating and maintenance costs

Condition: new, Year of construction: 2026, Machine designation: Portal nailing machine for the pallet & packaging industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Designed for manufacturing various types of pallets and box components • Angled machine frame with wooden wall for templates • Divided into two work zones; the operator alternates between left and right operating sides • The nailing bridge is equipped with up to 6 individually controlled nailing units for jumbo coil nails (approx. 6,000 nails) • Machine operation and programming of new pallet types are performed via a touch display • Existing programs can be quickly retrieved from memory at any time • Entered parameters provide visualization of products on the touch display. No manual trial-and-error for programming nailing points! • NEW – Integrated pallet stacking robot! Technical Data: • Max. standard pallet size: 3,000 x 1,700 mm per side • Max. optional pallet size: 4,000 x 2,000 mm per side Lsdpfx Asrallnom Nsaa • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets per 8 hours • Operators required: 1 – 2 persons • Low operating and maintenance costs

Condition: new, Year of construction: 2026, functionality: fully functional, Debarking Head with Root Reducer: Manufacturer: Stoiber GmbH Model: StoMill 3000 Year of Manufacture: 2026 Condition: New Price & Location: Price on request AT – 4122 Arnreit Laedjrk Nk Ejpfx Am Noa Description: For fully automatic debarking and root reduction of hardwood and softwood logs. System advantages: • Debarking head and root reducer in a single machine • Patented safety knife shaft • Fully automatic operation • Remote control operation • Low energy consumption Technical data: • Debarking shaft with 22 kW or 30 kW drive power • Reducer shaft with 15 kW – 45 kW drive power • Suitable for all logs with a minimum length of 2 meters • Log diameter: 20 – 120 cm Options: • Chip collection box • Scraper chain conveyor for chip removal • Log ejector / log receiving trough

Condition: new, Year of construction: 2026, Machine designation: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 RT Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Semi-automatic gantry nailing machine with rotary turntable (R) and pallet stacking robot for the production and stacking of various types of pallets and crate components. • The machine features a rotary turntable with two work zones for the placement of loose blocks and boards. In combination with the pallet stacking robot, this ensures optimal material flow. • The nailing bridge can be equipped with up to 6 individually controlled nailing systems for jumbo coil nails (approx. 6,000 nails), offering maximum flexibility for nailing your products. • Machine operation and programming of new pallet types are managed via a touch display. Saved programs can be recalled from memory at any time. The products and their parameters are visualized on the touch display—no manual movement required to teach the nailing points! • NEW – Robot for pallet stacking Technical Data: • Maximum pallet size: 3000 x 1700 mm per side • Maximum nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 - 600 pallets per 8 hrs • Machine operators: 1–2 persons • Low operating and maintenance costs Lajdpfx Ajrallrom Nea

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 512 mm, total height: 1,952 mm, total length: 772 mm, Directly from the manufacturer, the original from Apfel GmbH. Fully assembled including 2 KRB 4700 shelves 1 storage box KEN 6422 (No. 62) 2 storage boxes KEN 4322 (No. 42) 1 waste garbage can made of sheet zinc 2 brooms 1 hand brush 1 dustpan Lasdpfx Amsuvigpo Nsa 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Load capacity: 400 kg Dimensions: 512 w x 1,952 h x 772 t Structure powder-coated in black gray RAL 7021 (body) Various designs and special solutions possible, we as the manufacturer will support you with your wishes! (See pictures 3+4)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Laodpfeyz Sn Njx Am Nsa

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Laodpfendn Agjx Am Nsa Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 Lajdjxfvahspfx Am Nja 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, fork thickness: 80 mm, fork width: 180 mm, Telescopic crane 5000 kg with a load center of 600 mm Telescopic length on the hook: 3600 mm with a payload of 950 kg Laedpfx Aoiuh I Ajm Noa See load diagram for load center capacity One swivel hook with a payload of 5000 kg with a shackle One swivel hook with a payload of 3000 kg with a shackle Height adjustable via grid Galvanized bolts secured with a rope Fork pockets for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. Lodpeng Exasfx Am Noaa The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Lajdpoiq Hxkefx Am Noa Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027 - 60 kN - New Machine - BROACHING MACHINES MADE IN GERMANY. ==> Information for manufacturing companies or dealers with their own production: If required, the drawings, rights, spare parts, customer and prospect data, as well as planning and production documents (including design for a variant with 9 tons pulling force) for the broaching machine can be purchased from us. If interested, please contact us. ==> We currently have another used machine available, which is undergoing refurbishment. If interested, please contact us promptly. ==> Our new machines are built to order. Short-term production and delivery are possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available immediately. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special needles for internal splines, etc.) and accessories are available. Please inquire separately. All broaching tools and holders from other manufacturers can also be used on our broaching machines! Laedpfxeuqbnho Am Noa Complete manufacturing and assembly are carried out at our facility in Germany. Furthermore, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, as well as all other required components – including electrical parts). Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: The primary application area is the production of keyways from 3–28 mm (and beyond), as well as similar-sized profiles. Due to its compact size and minimal footprint, the machine can be successfully used in small, medium, and large workshops. The low price also makes it attractive for small-batch and single-item production. Drive is provided by a pole-changeable geared brake motor. The maintenance-free dual-spindle drive ensures smooth operation, a central pulling point, and constant cutting performance. The open tool table enables easy placement of large workpieces. In most cases, the workpieces do not need to be firmly clamped. Stroke adjustment is done via adjustable limit switches with stroke limitation. With short hubs/workpieces, multiple workpieces can be stacked. Broaching needles, mandrels, and spare parts available on request. Technical data: Pulling force: 60 kN at 3 m/min; 40 kN at 6 m/min Broaching speed: 3 m/min & 6 m/min (Optional: stepless speed adjustment from 0 to 6 m/min via extended electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Working table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Total height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment This machine complies with the current Machinery Directive and bears the CE mark.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die from DIL Engineering GmbH, a specially developed solution for texturing alternative proteins in high-moisture extrusion (HME). The cooling die is ideal for use in research and development and enables the targeted production of fibrous, meat-like textures, which are in high demand particularly in modern meat and fish alternatives as well as in the snacks and convenience foods sector. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow control and fiber formation. The system has a modular design and can be configured with one or two segments depending on requirements. Additionally, one or two separate cooling circuits are available, ensuring precise temperature control and thus consistently high product quality. The integration of inline measurement systems is possible and allows for continuous process monitoring and optimization. Laodpfey D Hrbjx Am Nea Particular emphasis was placed on hygienic design, ensuring that the system meets the high standards of the food industry. Its well-thought-out design makes cleaning quick and easy, which is a significant advantage, especially in a development setting. The FiberFlow F50 is ideal for pilot trials, product development, and the optimization of formulations in the field of alternative proteins, and can be easily integrated into existing extrusion lines.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Lodpfx Aswymlysm Noaa Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) Ledpfeh Uuhcsx Am Njaa We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Lasdpfx Ajy Emthsm Nea - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, Year of construction: 1994, Mechanical sorting and conveying unit Lasdpfxewtnl Us Am Noa

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: Ljdpey D Sy Rsfx Am Noaa - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, Zeiss CNC coordinate measuring machine Prismo MP5 Year of manufacture: 8/1999 Ljdpjufgbnjfx Am Nsaa Last calibration: 9/2023 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Features, Equipment: C98 control system with control panel RDS sensor system with RST 5-way probe change magazine RST 5x probe system Reference probe Probe accessories Calibration sphere Computer with monitor Calypso Basic 5.4 software Loading system Further accessories and options available Complete retrofit of the C99 and the current Calypso version possible Available at short notice

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, type of input current: AC, type of cooling: air, overall weight: 120 kg, scan area length: 150 mm, scan area width: 150 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W Lasdpfxoxd Az Nj Am Nja - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) Laodowkpxkepfx Am Nea - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, We are offering this display machine SM Innotech Laminator Incapcell 35-18, year of manufacture 2018. Lsdpfx Aoy Druujm Neaa Manufacturer: SM Innotech GmbH & Co.KG Model: Incapcell 35-18 Year of manufacture: 2018 Condition: Display machine Category ID: 33 Machine type: Laminator There are 2 units of this system available; both are new as they have never been used. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2019, condition: used, We are offering this used SM Innotech GmbH & Co.KG Incapcell 22-18 laminator, year of manufacture 2019. The system has very low operating hours, as it was used as a test machine for trial purposes. Individual software updates or other modifications can be provided according to requirements and at additional cost. The system is available for immediate delivery. If you have any questions or need further information, please feel free to send us a message or give us a call. Laedpey Dq D Iofx Am Nea

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1 x Reich GmbH stainless-steel fixed table bandsaw for cutting typically used for cutting meat. Supplied with several spare parts and new blades. Model - Profi 400. Serial number - 400 1141. Date of manufacture - 2005. Size of blade - 3204mm x 16mm. Electrical requirements - 400 V / 50 hz / 3 phase. Lasdpfx Amoyzxd Rj Nsa