Used Turning Machine - Cycle Control for sale (91,175)

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Type of machine: NEF Plus 500 Year of manufacture: 1995 Podpfotpn S Iox Ab Sogr Control system: Gründig Machine's weight: 2650 kg Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Spindle opening: 70 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Pgedpfxeyzhlqo Ab Ser Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable Psdpsyzf Naefx Ab Sogr 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center width: 1,600 mm, center height: 275 mm, spindle speed (max.): 3,500 rpm, bed width: 420 mm, controller model: Fagor  8055, TECHNICAL DETAILS Maximum turning height: 275 mm Pgjdpfszuwwtsx Ab Sjr Distance between centers: 1,600 mm Turning diameter over bed: 550 mm Turning diameter over carriage: 310 mm Turning diameter over removable bed: 790 mm Bed width: 420 mm Spindle bore: 82 mm Spindle speed: 80–3,500 rpm Max. workpiece weight: 2,000 kg MACHINE DETAILS Control method: Teach-in Controller: Fagor 8055 Connected power: 15.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,150 x 2,200 mm Shipping weight: 5,000 kg Shipping packages: 2 pcs. EQUIPMENT CE marking

Condition: used, CNC Turning and Machining Cente: Pgodpfx Ajzwn Sgsb Sor Gildemeister/DMG Mori CTX2500/700 Year: 2019 Serial No.: 02620000651 2 driven spindles, rated speed 4,000/5,000 rpm, net weight 6,360 kg, accumulated operating hours 44,087 h, spindle hours: 27,832 h, cooling unit, chip conveyor, coolant treatment system, control system model: Ergoline, tool turret, 14 positions, for driven tools

Condition: used, Year of construction: 2004, total length: 3,400 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 3,000 kg, VDF DUS 400 ti Year of manufacture: 2004 FORKARDT F+250 Previously used in the training department of a gear factory. Was in production until approximately 3 months ago. I own this lathe from 2004, as well as a DUS 560 ti from 2004 with a chip conveyor, and a DUS 560 ti from 2005. All three machines come from the same factory and were used together until they were dismantled in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have several chucks for the FORKARDT centering chuck. Pgedpfx Aszwbyqsb Ssr Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 2004, total length: 4,200 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti With chip conveyor Year of manufacture: 2004 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Psdpfx Aozwbx Tjb Segr Was in production until approximately 3 months ago. I own this 2004 lathe with chip conveyor, as well as a DUS 560 ti from 2005 and a DUS 400 ti from 2004. All three machines originate from the same factory and were used together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have some collet chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 2005, total length: 3,600 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti Year of manufacture: 2005 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this lathe from 2005, as well as a DUS 560 ti from 2004 with chip conveyor, and a DUS 400 ti from 2004. All three machines come from the same factory and were in use together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also own several chucks for the FORKARDT centering chucks. Pgjdpfszwbxysx Ab Ssr Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, total length: 4,066 mm, total width: 2,583 mm, total height: 1,829 mm, workpiece weight (max.): 1,300 kg, type of input current: three-phase, overall weight: 4,300 kg, travel distance X-axis: 345 mm, travel distance Z-axis: 125 mm, workpiece weight between centers: 1,000 g, workpiece diameter between centers: 365 mm, distance between centers: 2,000 mm, workpiece length between centers: 2,000 mm, The VDF 560 DUS is one of VDF Boehringer's most popular teach-in turning machines, known for its turning diameter. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency in the production of single items and small series. This machine is currently located in our showroom, and on-site viewing is possible! Additional options & accessories: - Tool cabinet - Various tool holders - Various cutting tools - Double Multifix holder including Capto connection. - Original fixed guard. - Original documentation. Weight & dimensions: 4,300 kg 4066x2583x1829 mm Pjdpfx Aozwnl Hsb Sjgr

Condition: good (used), Year of construction: 2011, functionality: fully functional, Micromill BNC 26120 XL, Year of manufacture: 2011, Control system: Fagor 8055 T, Turning length: 3,000 mm, Center height: 350 mm, 8-position turret, Pgedpfxszw Adko Ab Ser Tailstock, Chip conveyor, Spindle speed up to 3,500 rpm, Flat bed guidance, Max. workpiece weight: 2,000 kg.

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm Pgsdpfxjzv Sdke Ab Sjr If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment: Pjdpeza Dwxefx Ab Segr  2 ATS tables (spring-mounted table)  2 diamond cup wheels 175x60x51 mm  Column design

Condition: used, Year of construction: 2006, turning diameter 1000 mm swing dia. 1000 mm Z-axis stroke 900 mm control Siemens 840 D tool taper SK 50, VDI 60 tool piece magazine with 44 Plätzen Pgsdpfx Aozwg N Rsb Ssr workpiece weight max. 35 kg tool length - max. 500 mm

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Pjdpjzwa Rbjfx Ab Ssgr Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 1993, turning diameter ca. 500 mm swing diameter ca. 600 mm travel -x axis ca. 400 mm travel -z axis ca. 600 mm spindle turning speed range 2000 U/min Pedpfstyp Suox Ab Sjgr spindle drive 63 kW control SIEMENS control SINUMERIK System 3 tool turret 1 x 12 Pos weight of the machine ca. 9,3 t - R-version, turret right hand side of 3-jaw chuck - Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolant

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Pgsdpfx Asv R E Rdjb Ser Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC universal tool milling machine DECKEL, Type FP 4 MA Machine No. 2204-1734 Serial No. 25842 Year of manufacture 1989 CNC path control: GRUNDIG Contur 2 Travel distances X: 485 mm, Y: 385 mm, Z: 380 mm Distance table to milling spindle max. 480 mm Table size 800 x 460 mm Spindle mounting ISO 40 Spindle speed 63 - 3150 rpm, 18 steps Feed rate max. 2000 mm/min Distance table to milling spindle max. 480 mm Vertical quill travel 80 mm Horizontal quill travel 150 mm Main spindle drive 3.7 / 4.4 kW Pgedpfszwmc Rsx Ab Ser Power connection 400 volts, 50 Hz, 13 kW - CNC path control: GRUNDIG Contur 2 with TFT screen - Hydro-mechanical tool clamping - Swiveling control panel - Handwheels for each axis - Rigid angular table - Coolant system in the machine base - Central lubrication - Control cabinet located next to the machine, L x W x H 800 x 750 x 1150 mm Space requirement L x W x H 2400 x 2300 x 2000 mm Weight approx. 2400 kg Good condition

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 4,946 h, functionality: not functional, machine/vehicle number: 2406.03, turning diameter over cross slide: 150 mm, turning length: 625 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 4,000 rpm, total length: 1,650 mm, total width: 1,450 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 2,200 kg, spindle diameter: 320 mm, distance between centers: 750 mm, Universal lathe with cycle control from DMT - CD 322 - Turret defective and removed. Parameters were deleted for troubleshooting purposes. Pgsdpfezwpq Dex Ab Sor

Condition: excellent (used), Year of construction: 2019, Sub-spindle, driven tools, Y-axis, C-axis FANUC 32i B-NT-SmartX control Turning diameter max 225 mm Turning length -910 mm Chuck Diameter -210 mm Main-spindle speeds 5'000 rpm Pjdpovwkirjfx Ab Segr Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Barloader LNS Sprint 565 S2 Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Pgsdpfjia Rtdsx Ab Ser Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 1986, Swing diameter: 1,320 mm Turning length: 5,000 mm Psdpfx Aezwlxwob Sogr Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Machine weight approx.: 18 t

Condition: good (used), Swing diameter over the carriage 225 mm Center height over the bed 260 mm Carriage length 520 mm Carriage width 215 mm Spindle bore 72 mm Chuck diameter 175 mm Spindle diameter in the front bearing 100 mm Drive power 22 kW Spindle speed 20-4000 rpm Tailstock diameter 80 mm Pgsdpfx Abszwpkko Ssr Tailstock travel 100 mm Tailstock arbor MK4 Distance between centers 600 mm Bed width 320 mm

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor Podpfx Abjr U Skho Ssgr *

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 U/min transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m Additional information Pgedpfozvl Ucex Ab Sor Switch-on hours (date 18. May 2026): 28.970 h * Control WEILER D3 (SINUMERIK 810 D powerline) * Chip conveyor * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: used, Lead and feed spindle lathe, manufacturer Böhringer, type D480, with: three-jaw chuck tailstock Pjdpfxjzvyiuj Ab Sjgr Multifix tool holder machine light and splash guard Lynette rotating center electric feed Emergency stop, CE compliant, retrofitted. Motor power 11 kW Operating voltage 400 V, 50 Hz, 3/N/PE Control voltage 230 V AC, 24 V DC Control cabinet Rittal, protection class IP65.