Used Uhlmann Thermoforming Machine/Blister Machine for sale (65,607)

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum Bsdpfxetndpzj Aqwjll the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Bodpfx Aqsunia Howsll

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. Bljdpfxjyuc Hze Aqwsl In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. You can produce blister "0" 120x70x15 and blister "00" 120x70x30. All machines are supplied with the relevant technical documentation and CE certificates. All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files.

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Bsdpfszx Ergsx Aqwell Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 Bledpfxezvycns Aqwol TECNOMACO ITALIA S.r.l. – FAMAR AP60 Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Condition: used, Year of construction: 2008, functionality: fully functional, O.M.A.R. FANTASY PLUS – PHARMACEUTICAL BLISTER MACHINE For sale: O.M.A.R. / Dott. Bonapace FANTASY PLUS semi-automatic blister machine, used in pharmaceutical production, supplied with extensive original format tooling and comprehensive technical documentation. TECHNICAL DATA Manufacturer: Dott. Bonapace & C. / O.M.A.R., Italy Model: FANTASY PLUS Year: 2007 Voltage: 220/230 V Operating pressure: 9 bar Weight: approx. 125 kg CE compliant APPLICATION Suitable for pharmaceutical R&D, laboratories, clinical batches, stability studies, samples, and small production batches. According to the original documentation, the machine is designed for: - PVC/ALU Oblong - PVC/ALU Round - ALU/ALU Oblong - ALU/ALU Round EXTENSIVE TOOLING A major advantage is the exceptionally large quantity of format tooling included. The package contains numerous forming, sealing, and die-cutting components for different blister configurations, including: - Forming molds and plates - Heated forming/blowing plates - Sealing plates and molds - Cutting dies and counter plates - Centering components - Various format inserts - Coding/embossing accessories - Additional format-specific components Different round, oblong/oval, and rectangular cavity configurations are available. All tooling shown in the photos is included. Due to the large quantity of tooling, the exact allocation of every individual component to a complete format set cannot be guaranteed. DOCUMENTATION Comprehensive original documentation in German is included, covering CE documentation, technical data, operation, forming, sealing, die cutting, ALU/ALU processing, maintenance, spare parts, and tooling codification. Original drawings for individual blister formats are also available. CONDITION Very well-maintained used condition from pharmaceutical use. Inspection and demonstration by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Blsdpfx Aqozxc Apowsl Worldwide delivery can be arranged. PRICE: EUR 32,500 net, negotiable CYCRON GmbH Switzerland Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2008, A Uhlmann blister packaging line in need of repair is available. 1) Uhlmann UPS 4 ETX blister machine, year of manufacture: 2008, design: modular balcony design, modules: 12, blister capacity: 10 tablets, blister format X/Y/Z: 100mm/39mm/5.7mm, packaging output: 220blisters/min, roll width forming/sealing: 256mm/246mm, feed: 102mm, max. forming film roll diameter: 800mm, max. lidding film roll diameter: 300mm, filling section length: 1360mm, theoretical output: 50cycles/min, film width range: 63mm-300mm, punching width range: 28mm-284mm, max. forming depth: 12mm, min. blister dimensions X/Y/Z: 30mm/3.5mm/60mm, max. blister dimensions X/Y/Z: 110mm/12mm/145mm, max. stack height: 85mm, max. blisters per stack: 10, weight: approx. 7000kg. 2) Uhlmann C 2155 cartoner, year of manufacture: 2008, cartoning output: 10-150cartons/min, max. stacking output: 400blisters/min, product carrier height: 87mm, magazine length: 1500mm, max. blister width with double-stack insertion: 55mm, max. magazine capacity: approx. 1200cartons, max. leaflet dimensions X/Y: 210mm/600mm, min. leaflet dimensions X/Y: 100mm/100mm, min. carton dimensions X/Y/Z: 30mm/15mm/63mm, max. carton dimensions X/Y/Z: 115mm/90mm/150mm, weight: approx. 3200kg. The rear reject flap of the C 2155 is no longer present. The safety shut-off valve of the UPS 4 is defective, and the touchscreen monitor responds too slowly. Overall line dimensions X/Y/Z: approx. 14000mm/5500mm/2750mm, weight: approx. 10200kg, control system: PC/PLC. Documentation available. An on-site inspection is possible. Expected to be available from the end of August 2026. Bedpfszbl Nlsx Aqwjll

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Technical Data Blister Module (B 1770) Max. Output 700 blisters/min Application area Solid products Max. format range [Feed x Width] 200 x 284 mm Cartoning Module (C 2305/C 2504) Max. Output 300 or 500 folding cartons/min Application area Blisters Max. folding carton size [A x B x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm Bsdev D Ipispfx Aqwsll See PDF for details.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approx. 60,000 packs (approx. 40 operating hours) have been processed during trial operation! For sale is an absolutely like-new, high-end deep-drawing packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in a cleanroom, dust-free • Operating hours: Only approx. 60,000 individual packs (equivalent to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (incl. discharge belt) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: Compressor not included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format configuration: 4 lanes side by side / 1 row (pp. 13-14) • Actual internal form dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (form plate type 5, directly water-cooled) (pp. 14-15) • Feed / discharge length: 185 mm (pp. 13-14) Bjdpfx Aozwgxroqwell ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers and best-before dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge belt: High-quality Intralox discharge belt (800 mm) with blue Intralox chain and separate frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection nozzles installed on the tool side for packaging under modified atmosphere. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control system (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic circuit diagrams in German are included (pp. 19-20). 💰 Price € 29,900,- net excluding VAT. • Shipping costs: Available on request throughout Europe • Delivery time: Immediately available • Inspection and collection: Possible at any time by arrangement (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.)

Condition: refurbished (used), functionality: fully functional, Uhlmann C 130 Horizontal Cartoning Machine for Ampoules / Blister Packaging Machine - Fully automatic blister strip packaging with simultaneous leaflet insertion - Max. output: 120 cycles/min (depending on product) Format: L= 70 x 150 mm W= 30 x 100 mm H= 15 x 85 mm New hardware and software: Mitsubishi PLC control and 8-inch color touch panel 10-year spare parts availability guarantee Mechanically overhauled Optional accessories: - GUK leaflet folding device (4-fold) - Hotmelt gluing or tuck-in flap - Barcode reading for folding cartons / leaflets - Luminescence control, presence check for leaflets in folding carton - Embossing station - Leaflet pre-insertion - Vacuum pump / Venturi Bledpfx Aeyng Ddeqwjl

Condition: reconditioned (used), functionality: fully functional, Continuous cartoner for blister packaging. Single-lane, infeed capacity with vacuum belt 400 BL/min. Bljdpfxjr Ny H Hs Aqwol GuK stacking folder, output max. 250 FS/min.

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS Bedpezcftgofx Aqwoll • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm • Installed power: 21 kW • Electrical power supply: 380 V III + N • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION • Original manuals • CE marking • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister packing machine, year of manufacture 1991. This is a high-performance automatic inline blister sealer with card feeder, suitable for film thicknesses from 150 µm to 400 µm (possibly higher, but not personally tested). The complete line is being offered (see pictures). Speed: 1–9 cycles/minute with 4-up production. Example: air freshener, 4 units per blister palette = 2000 blisters/hour. Approximate dimensions: 9m x 1m x 2.25m. Sealing plate size: 57x32cm. The machine is 100% functional and is still in operation. Inspection and trial run before purchase are possible. Location: Czech Republic (10 minutes past the Bavarian/Czech border at Furth im Wald). Bledey Anifepfx Aqwol

Year of construction: 2014, condition: good (used), Used SEALPAC RE25 Thermoforming Packaging Machine (MAP/Vacuum) This SEALPAC RE25 thermoforming machine is a high-quality, industrial-grade packaging system designed for continuous operation in food production environments. Built in the Netherlands, SEALPAC machines are known for their durability, hygiene, and consistent sealing performance. This unit is in good used condition Technical Overview Model: RE25 Power: 3-phase (230/400V, 50–60 Hz) Power consumption: ~17 kW Compressed air: 6–7 bar Blsdpfsyvr Irex Aqwel Gas (MAP): 4–6 bar Film width: approx. 300–650 mm Max forming depth: up to 160 mm Machine length: approx. 8 m. Contact Us Get in touch for: Price Inspection Additional details or videos

Year of construction: 1986, condition: used, Year of manufacture: 1986 Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with upper heating elements. MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Blodozu Nw Eopfx Aqwol Film thickness: 0.2-0.6 mm Installed power: 23 kW Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021 and is fully functional. It can be seen in operation near Warsaw. Price: 35,000 EUR

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Bedpfxexm Sa Hj Aqwell Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Bodoif Elgspfx Aqwjll

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C Bjdpfxsuk Dwfs Aqwjll The machine is incomplete and not operational! For spare parts only!!

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Bljdpfx Aqozumrmswol Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Water inlet pressure: > 0.1 kPa Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Condition: used, Year of construction: 2014, COMI 1092 Door liner thermoforming machine, Thermoformer HEDL 2000x800x200, Year of Manufacture 2014, Serial Number C1092 Machine Specifications (List View) Forming & Mould Dimensions Maximum inside frame dimensions: 2004 × 804 mm Maximum moulded part height: 150 mm (male mould) / 50 mm (female mould) Maximum mould base dimensions: 2000 × 800 mm Minimum mould base dimensions: 600 × 500 mm Coil width range (min/max): 580 to 900 mm Mechanical Characteristics Lower die holder force: 40,000 kg Machine weight: 20,000 kg (20 tonnes) Machine dimensions: See Drawing LO-029-14-01 Heating System Upper heating power: 168 kW Thermoregulator power: 24.99 kW (3 × 8.33 kW) Motors & Drives Forming motor power: 12 kW Vacuum pump motor power: 7.8 kW De-reel device motor power: 0.37 kW Sheet conveyor motor power: 8.17 kW Transport regulation motor power: 1.1 kW Fan motor power: 3.0 kW (4 × 0.75 kW) Transfer unloading motor power: 3.0 kW (2 × 1.5 kW) Scrap cutting motor power: 2.2 kW Moulded-part unloading belts motor power: 0.5 kW Cooling & Auxiliary Equipment Chiller power: 28.75 kW Auxiliary equipment maximum power: 4.12 kW Electrical Requirements Maximum installed power: 264 kW Typical operating power (50% load): 132 kW Pneumatic Requirements Pneumatic operating pressure: 6 bar Air consumption: 2,000 N litres/cycle Water Requirements Water temperature: 25 °C Water pressure: 2 to 3 bar . Fully automatic thermoforming machine designed to shape plastic sheets up to 2000 × 800 mm with a maximum forming depth of 150 mm (200 mm), suitable for high-capacity industrial applications. Thermoformer details: Bljdpfjzumwcsx Aqwjl Forming area 2000 × 800 mm Max forming depth 150 (200) mm Heating station – ONLY Upper heater, heater length fully configurable, fulfils pre-heating and heating functions. Pressure and vacuum forming operation. Trimming press. Scrap collection end station. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management.

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Bedpfx Aszt Sukoqwell Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Year of construction: 1990, condition: ready for operation (used), Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power. Bljdpfx Aqoylnz Sjwol

Year of construction: 2019, condition: ready for operation (used), A horizontal thermoforming, vacuum and packaging machine from Ulma for flexible and rigid film packaging from the food industry is available. Frame length: 4000mm, working height range: 850mm-950mm, max. film width: 420mm, max. film index: 360mm, max. forming depth: 130mm, max. film roll diameter: 350mm, max. film roll core diameter: 76mm, vacuum pump: Busch R5 RA 0302 D, machine dimensions X/Y/Z: approx. 1050mm/5000mm/1950mm. Including rigid and flexible film rolls. Documentation available. An on-site inspection is possible. Bedpfszpywrjx Aqwoll

Year of construction: 1996, condition: used, Year of manufacture: 1996 Thermoforming, die-cutting for production from PET, PVC, PS, PLA films, etc. Working area: 500 x 740 mm Forming height: 150 mm Blsdpfxezu Nx Ns Aqwel Maximum film width: 540 mm Film thickness: up to 1.5 mm Installed power: 13 kW Busch pump New control system. The machine was overhauled in 2020 and is fully operational; it can be viewed in operation near Warsaw. Price: 23,000 EUR

Year of construction: 2002, condition: ready for operation (used), A thermoforming machine A&D with a cooling unit is available. Lower film width: 185mm, upper film width: 175mm. Documentation available. An on-site inspection is possible. Expected to be available from the beginning of 2027. Bedoy Igc Uspfx Aqwjll