Used Wmw Erfurt Bolster Plate for sale (13,284)

Condition: used, Technical details: diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 Fpsdpfsu Nurfox Aagjh blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t Fjdju N A Uuspfx Aagsph stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm Fjdpfx Aaju N A U Ijgsph distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Technical details: Fjdpfx Aaeu Nurxegoph intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm *

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t Fedpexuv Htefx Aagoph dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: excellent (used), functionality: fully functional, pressing force: 500 t, stroke length: 500 mm, table width: 2,800 mm, table length: 1,500 mm, overall weight: 85,000 kg, Manufactured by Erfurt (Germany) Capacity, ton 500 Strokes per minute 14 Distance between columns, mm 2800 Max distance between table and slider, mm 920 Table size, mm 2800 x 1500 Ram dimensions, mm 2750 x 1500 Slider stroke, mm 500 Slider adjustment, mm 500 Fodpfx Aajy Icfrsgoph Motor capacity, kW 55 Press weight, kg 85000 he Erfurt PKZZ I 500.1 is a heavy-duty mechanical stamping press designed for high-capacity sheet metal forming operations. Manufactured in Germany by Erfurt, this press is built with a robust frame and proven mechanical drive system, ensuring reliability, precision, and long service life in demanding industrial environments.

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good - Operational status: Ready for immediate use Fjdpfx Aajyvzzzsgoph This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request.

Condition: used, Year of construction: 1989, Erfurt press with 160-ton capacity, currently disconnected and drained, ready for transport. Fpsdpfx Aaoxyp Axogoh

Condition: excellent (used), functionality: fully functional, pressing force: 315 t, stroke length: 400 mm, table width: 2,500 mm, table length: 1,400 mm, ram plate width: 1,400 mm, ram plate length: 2,450 mm, die cushion force: 63 t, die cushion stroke: 160 mm, distance between stands: 2,500 mm, ram adjustment: 400 mm, PKZZ I 315.1 is a heavy-duty single-action mechanical press with a two-point drive system, designed for high-precision forming of large sheet metal parts. The rigid two-column frame ensures excellent stability and even load distribution across the working area. Fjdpfjyx Evzjx Aagjph The press is in excellent condition and still under power.

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t Fjdpjwx R Rdjfx Aagsph dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: used, rated capacity 23 kW rated current 43 A voltage 400 V For sale is an electrical control cabinet, which originally belonged to the a single-column eccentric press, make Erfurt, type PEE III/160 Fpsdpfx Aeucgnijageh

Condition: like new (used), Year of construction: 1989, Sheet stamping press ERFURT PE2-H-315 ES Manufacturer: ERFURT Made in: Germany Specification: Max slide-block force over distance to bottom dead center 12.5 mm: 3150 kN Slide-block force over distance to bottom dead center 160 mm: 1100 kN Idle stroke amount: 25 mm Slide-block stroke: 500 mm Min closed die height: 680 mm Max closed die height: 1000 mm Moving table dimensions: 2800x1500 mm Die cushion: -Max stroke: 160 mm -Adjustable stroke: 160 mm -Max double-acting force: 630 kN Fpjdpoyir Uksfx Aagjh -Max ejector force: 630 kN Main motor power: 45 kW Height above floor level: 7100 mm Press weight: 71.3 tons

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Fjdpfxjvbcxtj Aagoph Movie available

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Fodpfx Aoykl Iasagsph Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: used, Technical details: floor-plate length: 4000 mm Fedpfx Aaozcwr Iogeph plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 4,6 t space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m *

Condition: used, floor-plate length:3140 mm Fjdpfxecxxl Us Aageph floor-plate width:1800 mm floor-plate height:100 mm groove width:36 mm no. of flutes:10 flute distance:260 mm weight of the machine ca.:4,1 t dimensions of the machine ca.:3140 x 1800 x 100 m

Condition: used, floor-plate length 7000 mm floor-plate width 2500 mm floor-plate height 300 mm Fpodpfx Aoyqv Tgjagsh number of T-slots 10 total power requirement . kW weight of the machine ca. 20 t dimensions of the machine ca. 7000x2500x300 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical details: floor-plate length: 1345 mm plate width: 845 mm Fedpfju N Dg Ssx Aagsph plate height: 28 mm weight of the machine ca.: ca. 260 kg transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used - with diverse mounting holes M12 - with diverse (9x) clearance holes Ø 13mm *

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Plate thickness: 65 mm Fjdsu N D Dwopfx Aageph very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 205 mm plate width: 195 mm Plate thickness: 65 mm 14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm * Fpsdpfxeu N D H Es Aageh

Condition: used, Technical details: floor-plate length: 3160 mm plate width: 2700 mm plate height: 410 mm Plate thickness: 410 mm weight of the machine ca.: 8,0 t Clamping plate for sale Material cast steel/profiled cast iron Finished surface T-slots according to DIN 650: a=41.5; h=72.0; b=70.0; c=28.5 mm Center stand 300 mm 11x through holes Ø 32 x 60 mm Fedpfsu Ni Diex Aagjph 2x fixing holes at the front Ø 41 mm *

Condition: used, Technical details: floor-plate length: 7040 mm plate width: 2230 mm plate height: 330 mm weight of the machine ca.: 12800 / Stück kg 2 pieces of cast steel plates for sale free. Surface finished Fodpfou N Dl Isx Aageph T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28, and distance T-slot to T-slot: 305mm The plates are equipped for side mounting/clamping connection. Through holes 11 pieces Ø 28mm continuous with counterbore Ø 600mm x 260mm and 12 pieces Ø 28mm continuous with counterbore Ø 114 x 270mm. Our price per plate. *

Condition: used, Technical details: floor-plate length: 470 mm plate width: 340 mm plate height: 120 mm weight of the machine approx.: 107 kg space requirements of the machine approx.: 470x340x120 m Fjdpfeu N Dn Nox Aageph from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm *

Condition: used, Technical details: floor-plate length: 385 mm plate width: 205 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) Fpodpfx Aasu N D Hregsh *

Condition: used, Technical details: floor-plate length: 255 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) Fpjdeu N D Icepfx Aagoh *