Center lathe

VÖEST DA 300/2000

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Hodpfxevt D D Ue Al Sol Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm Hjdpfx Aou Sbkgol Sel control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, greates pass round over bed 480 mm swing diameter over bed slide 300 mm turning length 1500 mm centre height 240 mm centre distance 1500 mm spindle bore 42 mm Hedpfx Ajtqqx Aol Sel spindle turning speed range 14 - 1400 U/min total power requirement kW weight of the machine ca. 2,4 t dimensions of machine L x W x H 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center

Condition: used, Year of construction: 1960, Technical details: turning diameter over bed: 630 mm turning diameter over support: 320 mm turning length: 2800 mm centre distance: 2800 mm turning dia. in gap: 700 mm length of gap: 450 mm spindle bore of work spindle: 70 mm weight of the machine ca.: 4,4 t dimension machine xH: 4,7 x 1,5 x 1,5 m Hedpfx Aeu Ix A Esl Sol Thread cutting possible Accessories: 4-jaw chuck various tips Gear wheels Jaws and small parts *

Condition: ready for operation (used), Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible. Hsdpfx Alowynvte Sjl

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Hsdpfxjw Ew D Ds Al Sol Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Available immediately! Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout - 5-Position Longitudinal Stop for the Saddle - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses Hedopq R Rdepfx Al Sel - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 27,218 h, spindle speed (max.): 3,600 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 930 mm, overall weight: 2,300 kg, controller manufacturer: HEIDENHAIN, controller model: TNC 410/426, positioning accuracy: 0.003 mm, swivel angle C-axis (max.): 360 °, number of axes: 3, This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 210 mm, and Z-axis travel of 930 mm. The machine includes a robust table size of 520 x 900 mm with a load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MT 500/1000 AT machine we have for sale. Contact us for further details. • Machine/Mechanic MT500-1000 • Travel X-axis: 210 mm • Travel Z-axis (Multifix holder + manual chuck): 930 mm • Travel Z-axis (Multifix holder + hydr. chuck): 930 mm • Travel Z-axis (Turret + manual chuck): 930 mm • Travel Z-axis (Turret + hydr. chuck): 930 mm • Travel C-axis: 360 degrees • Spindle clearance 45 mm with hydraulic chuck: 3600 rpm • Spindle clearance 57 mm with manual chuck: 3600 rpm • Tool system Haase quick-change holder: 1 tool unit • Tool system Turret VDI 30: 12 tool units • Ball screw pitch in X: 5 mm • Ball screw pitch in Z: 10 mm • Rapid traverse X: 15000 mm/min • Rapid traverse Z: 20000 mm/min • Feed rate X + Z: 0-4000 mm/min • Feed force X-axis: 1382 daN • Feed force Z-axis: 609 daN • Tensile force hollow clamping cylinder: 145 daN/bar • Manual chuck Ø 200mm: 3 jaws • Hydraulic chuck Ø 210mm: 3 jaws • Coolant tank volume: 75 l • Coolant pump flow rate: 30 l/min • Coolant pump pressure: 1.4 bar • Max. positioning scatter: 3 µm • Max. backlash: 2 µm • Positioning uncertainty: 2 µm • Max. circularity error on workpiece: Hjdpfx Ajyxrndol Sjl

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, WE OFFER UNIVERSAL LATHE WITH BRAND NEW 3 AXIS DIGITALS COMPLETE TOOLS AND ACCESSORIESS. DESCRIPTION Description Hedpfxsvkpkzo Al Sjl Precision lathe, turning machine -Manufacturer: VDF Heidenreich & Harbeck -Machine bed rails: hardened -Turning length: 750 mm -Turning Ø over bed: 500 -Turning Ø over recess: 355 mm -Turning Ø over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 7.5 kW -Accessories: 1x steady rest, 6x Multifix tool holder, -Dimensions: 1180/3050/H1345 mm -Weight: 2000 kg

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained MAHO MH-C 900 milling machine. Factory number: 90167 Hodpjyryudefx Al Sol If you have any questions or require further information, please feel free to send us a message or give us a call.