Used Blm E-Flex for sale (49)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 53,000 h, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! Information according to manufacturer (PDF) - no guarantee TECHNICAL DETAILS Minimum bar length: 3,200 mm Maximum bar length: 6,500 mm Max. bar weight: max. 15 kg/m (100 kg max.) Bar dimensions Circular cross-section: Ø 12 mm to 130 mm Square cross-section: side 12 mm to 100 mm Rectangular/oval cross-section: Ø 140 mm, min. side 12 mm, max. side 130 mm, max. difference between sides 110 mm Ppslowa A I Djhcdw Dsr Loading unit Max. loading unit capacity: 4,000 kg Max. loading length: 6,500 mm Max. unloading length: 4,500 mm EQUIPMENT - Loading unit - Unloading unit - Laser Coherent DC025

Condition: good (used), Year of construction: 2007, 400 V, 26 kW, dead weight: 6,150 kg. Control system: Siemens Sinumerik, laser (make: Rofin, type: DC 020, control: Rofin). Chip/material conveyor (make: FB Automazione, serial number: 322-06-12, year of manufacture: 2007), filter system (make: Sideros, type: FL045L00A1, year of manufacture: 2006), hydraulic cooling system. Pipe storage: approx. 660 cm. Ppelhcdowduizjw Djr

Condition: excellent (used), Year of construction: 2013, operating hours: 29,544 h, Functionality: fully functional, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 6 mm, sheet thickness brass (max.): 6 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, compressed air connection: 6.5 bar, space requirement width: 10,000 mm, space requirement length: 10,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 180 mm, control cabinet height: 2,500 mm, control cabinet length: 3,000 mm, worktable length: 3,000 mm, worktable width: 1,500 mm, Equipment: cooling unit, documentation/manual, safety light barrier, Výborný stav. Ppjlhcdwet Ix Efs Dor

Condition: reconditioned (used), Year of construction: 2002, operating hours: 28,055 h, Functionality: fully functional, laser power: 2,500 W, Equipment: cooling unit, Round tube min 12 mm max 140 mm - Square/rectangle tube min 120x120 mm - Bar weight max 15 kg/m Polhcdwsr Iz Nbe Djpr

Condition: like new (used), Year of construction: 2022, operating hours: 1,200 h, Functionality: fully functional, laser power: 3,000 W, working range: 6,500 mm, ADIGE LT7 9087000004 – Laser cutting machine ADIGE LT7. Main module. 9187000020 – Machine right-hand configuration. 9187000001 – Machine version for pipes up to 6500 mm in length. 9187000100 – Automatic bundle loader for pipes with lengths of 1900-6500 mm. 9187000120 – Ejection device for pipes stored in rectangular packages, at the 6500 mm bundle loader. 9187000135 – Swiveling loading chains for 6500 mm bundle loader. 9187000200 – Automatic support unloader. Main module. 9187000220 – Support unloader extension module L=6500 mm. 9187000250 – Belt table for workpiece removal on the right machine side. 9187000251 – Additional belt table on the right machine side. 9187000050 – 3D head ADIGE TubeCutter with Active Focus. 9187000400 – Machine equipment for fiber laser source. 9129001416 – 3KW fiber laser source. 9129000833 – Cooling unit with closed circuit for laser source. 9175060600 – Extraction system. 9178020163 – Active Piercing – Device for optimal laser piercing. 9187000300 – Active Tilt cutting process. Pslhcjwc Afbjdw Dopr 9178030170 – Active Scan device. 9187000190 – Active Weld seam detection. KTLT7-04 – Recommended spare parts for LT7. AC0909 – LT7 warning signs in German. 9187001910 – Artube Post Processor LT7 [First license]. 000004051 – Subscription renewal Artube service contract. ACLTSETUP – Acceptance kit. 000004019 – Training. 000004005 – Transportation. 000004021 – Assembly and commissioning. 000004020 – Training at the customer’s facility.

Year of construction: 1999, Condition: ready for operation (used), Control Unit Ppjlsvq S Ehohcdw Der Model FNC 200R Additional Equipment Additional set of tools for bending diameter: 25 mm Maximum pipe length 3400mm / Maximum pipe diameter 63mm Electric axes: X, Z, Q, other axes are hydraulic The seller has an electrical and electrical diagram This BLM DYNAM 3FNC profile bending machine was manufactured in 1999. It features a BLM FNC 200R control system and can handle a maximum bending diameter of 60 mm, with an additional set of tools for 25 mm diameters. Regularly serviced for reliable operation, the BLM DYNAM 3FNC machine we have for sale is a valuable addition to any workshop. Contact us for further details regarding this profile bending machine. Application Types Punching

Condition: excellent (used), Year of construction: 2002, N. 1 ELECTRIC – HYDRAULIC PIPE BENDER MOD. SWING – 6 AXIS VGP 3D YEAR 2002 CE EQUIPPED WITH: - SWING EARLY CORE EXTRACTION - SWING RVS310 VARIABLE RADIUS - SWING FRAME EXTENSION - SWING/SWING3 RIGHT-LEFT COUNTER SLIDE - VGP3D SW 3-DIM. PART FACT PROGR. STANDARD CONFIGURATION: - Characteristics, weights, measurements, capacities and performances of the machines are not binding and can be modified without notice. - 6-axis pipe bending machine with right and left bending direction in automatic cycle. - Management of a maximum of 4 + 4 radii. - Different or different diameters or combinations, in programmable automatic cycle with reference stop of the pipe in the clamp and relative pre-closure. - Brushless motors on the X, Y, Z, Q, and R axes. - Air-oil heat exchanger. - Automatic core lubrication. - Core extraction axis with rapid adjustment. - Predisposition for integration into a flexible production system. - Configurable with manual or automatic loading and unloading. - Safety fence with photocell at the access gate - Automatic right and left bending direction. - 4 right tools + 4 left tools without equipment set-up. - 5 controlled axes and electric bending axis. - 4+4 different bending radii in the same cycle for tubes with diameters from 6 to 18 mm. - 2+2 different bending radii in the same cycle for tubes with diameters from 20 to 30 mm. - Creation of particularly complex geometric shapes. - Mixed bending: fixed and variable radius - Interactive three-dimensional graphic programming on touch screen - Analysis of the feasibility of the piece on the video, with automatic verification of any collisions of the machine and the tube. - Automatic simulation of all alternative processing cycles to verify both the feasibility of the piece and the evidence of the optimal cycle in terms of time and costs TECHNICAL DATA TUBE BENDING MACHINE WITH RIGHT AND LEFT BENDING DIRECTION AND INTERACTIVE THREE-DIMENSIONAL GRAPHIC PROGRAMMING. Bending capacity for: round tube R=450 N/mm2: max. 30x2 mm round tube in Ot - Al- Cu: max. 35 mm metal wire: max. 18 mm Internal bending radius (reducible or increaseable on request): min. 22 max. 120 mm Useful length from die center to gripper edge: 1620 mm Useful length from die center to core extractor: 2700 mm X, Y, Z, R axes accuracy: ±0.05 mm/° X-axis positioning speed: 2000 mm/sec (with brushless motor) Y-axis bending speed: 300°/sec (with brushless motor) Ppolhswa T Nrscdw Dor Z-axis rotation speed: 900°/sec (with brushless motor) Q-axis positioning speed: 800° mm/sec (with brushless motor) R-axis positioning speed: 300°/sec (with brushless motor) Hydraulic pressure: max. 160 bar Noise level: 65 dB (A) Installed power: 12 kW Controlled axes: No. 5 Total weight: 2500 kg Not including matrices

Condition: ready for operation (used), Year of construction: 2009, operating hours: 57,480 h, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Round tube diameter: 12 mm – 220 mm Square tube dimensions: 200 × 200 mm Pjlhewakyuecdw Dopr Stainless steel thickness: 5 mm Steel thickness: 12 mm Aluminum thickness: 5 mm Bar and tube handling Bar length: 6,500 mm – 8,500 mm Max. bar weight: max. 35 kg/m Unloader length: 4,500 mm – 6,500 mm – 8,500 mm Laser Laser source power: max. 3,500 W Laser source: DC series SLAB laser from Rofin Sinar Beam quality (K-factor): > 0.9 Maintenance requirements: low (no moving parts in the resonator) Gas consumption: reduced Power consumption: reduced Control system CNC control: Digital CNC Siemens 840D Solution Line Loading and Unloading System Rear Carrier Loader: 8,500 mm Front Single Carrier Loader: 8,500 mm Unloader: 8,500 mm EQUIPMENT - Collector - Booster - 2 Lenses

Condition: excellent (used), operating hours: 55,000 h, Functionality: fully functional, laser power: 3,000 W, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, workpiece diameter (max.): 140 mm, New laser unit in 2021. TECHNICAL DETAILS Material and workpiece sizes Round tube: 12 mm - 140 mm Square tube: min. 12 x 12 mm - max. 120 x 120 mm Rectangular, oval, semi-oval, elliptical tube: min. 10 x 12 mm - max. 140 x 100 mm Standard material: steel, stainless steel, aluminum alloys (others on request) Loading and unloading system Loadable bar length: 3,200 - 6,500 mm Bundle loader loading capacity: 4,000 kg Unloading length: 3,500 - 4,500 - 6,500 mm Control and drives Controlled axes with digital drive: No. 8 LT722D - No. 9 LT823D Digital CNC control: Siemens 840D Machining capability Max. machinable profile weight: 15 kg/m Cutting thickness steel: 8 mm Cutting thickness stainless steel: 5 mm Cutting thickness aluminum: 4 mm Pjlhsu U Eynjcdw Depr laser Laser hours: approx. 55,000 h Laser unit replaced: 2021 for 55,000 EUR The system is equipped with a Rofin Sinar Slab laser from the DC series, which enables optimum cutting quality with low consumption thanks to the following features - High beam coefficient (K > 0.9 - 0.8) - No moving parts, therefore very low maintenance costs - Minimal gas and power consumption

Condition: reconditioned (used), Year of construction: 2011, operating hours: 35,612 h, laser power: 3,000 W, Equipment: cooling unit, Rear Beam Loader 6500 mm - Exhaust 6500 mm - Round tube min 12 mm max 140 mm - Square/rectangle tube max 120x120 mm Ppjlhcder Iz N Hsw Dor

Condition: good (used), Year of construction: 2006, 1 CNC pipe end forming machine Manufacturer BLM Type Tube Form M32x1.5 Year of manufacture 2006 Technical data Thrust force 3.5 tonnes Locking force 5 tonnes Working stroke 130 mm Max. tool diameter 80 mm Dimensions 2400 1400 x 2000 mm Connection power 12 KVA Ppolhcdwon Sm Dde Der Weight 2200 kg

Year of construction: 2004, operating hours: 59,437 h, Condition: ready for operation (used), Main Drive Ppslju Nn Exehcdw Dsr Laser power 2.5 kW Number of axis 2 Additional Equipment Booster Major maintenance recently including tube replacement This BLM Adige LT702D was manufactured in 2004. A robust laser cutting machine featuring a 2.5 kW power output, with 6.5m input and output lengths, and equipped with a booster. It has undergone major maintenance recently, ensuring reliability and performance. Ideal for handling projects requiring precision and efficiency. For more information about this laser cutting machine, please reach out to us. Application Types Cutting

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 605970300001, bending angle: 180 °, overall weight: 1,500 kg, pipe diameter: 18 mm, input frequency: 50 Hz, working length: 1,000 mm, controller model: DOC 85C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: DOC 85C Average performance: approx. 2400 sheets/h Maximum performance: 1000 mm - 90/90/0° - 0/180/0° with pipe 18 x 1.25 mm Bending performance Round pipe R=45 kg/mm²: 4 - 12.7 x 1.5 mm Round pipe R=35 kg/mm²: 4 - 14 x 1 mm Round pipe Al/Cu/Ms: 4 - 18 x 1.25 mm Bending speed H/Z Y-axis: 500°/s Positioning speeds X-axis: 2000 mm/s T-axis: 500 mm/s Rotation speed Z-axis: 900°/s Q-axis: 100°/s Measurement tolerances X/T axis: ± 0.1 mm Y/Z/Q axis: ± 0.1° MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Polhcdov D Nqnjw Djpr EQUIPMENT - Bar loader BLM Carm 7 (built in 2004, 405 kg) - Without conveyor belt - Without protective grille Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices Ppslhcdsu Ibvusw Dor *

Condition: ready for operation (used), Year of construction: 1990, Functionality: fully functional, wall thickness: 25 mm, overall weight: 2,800 kg, pipe diameter: 42 mm, controller model: RC 7000, TECHNICAL DETAILS Area of application: Processing of deformable pipes, rectangular pipes, round bars and square pipes. Pipe diameter: 42 mm Wall thickness: 2.5 mm Round steel (max.): Ø 20 mm Square material (pipe): 25 x 25 mm Rectangular pipe: 42 x 20 x 2.5 mm Bending performance Max. bending radius (inside): Ø 20 mm Ppjlhcdsvyib Sew Dsr Max. bending radius (outside): Ø 170 mm Bending speed: not specified Bending direction: to the left Pipe lifting length: 3,000 mm Control Software: RC 7000 Programming: Manual Operation: via control panel MACHINE DETAILS Machine weight: approx. 2.8 t Machine dimensions (L x W x H): 5.1 x 0.7 x 2.0 m Control cabinet dimensions (W x D x H): 800 x 700 x 2,000 mm EQUIPMENT - Various bending tools for pipe Ø 25 mm - 12 different collets - Various auxiliary and clamping devices

Condition: reconditioned (used), Year of construction: 2011, operating hours: 27,693 h, Functionality: fully functional, laser power: 3,000 W, Equipment: cooling unit, Automatic Rear Loading 6500 - Unloading 6500 - Round tube min 16 mm max 225 mm - Square tube max 160x160 mm - Rectangular tube max 200x100mm Pelhcdwsr Iz Slo Dopr

Year of construction: 1997, Condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Ppjlhcdjpr Utlsw Dsr Tube end-working machine with six-fold turret - tool holder. Tube diameter 6 - 40 mm Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Year of construction: 2009, Condition: ready for operation (used), Control Unit Brand SIEMENS Additional Equipment Automatic Loader of Tubes: Extended to 8500 mm This BLM Adige LT 8 tube cutting machine was manufactured in 2009. It is ideal for precise and efficient tube cutting tasks. Contact us for more information about this machine. Ppelhcdsvvykiew Dsr Application Types Cutting

Condition: good (used), Year of construction: 1988, Functionality: fully functional, WE OFFER AN POWERFULL MANDREL TUBE BENDING MACHINE IT CAN WORK UP TO 110mm tubes bending. MACHINE CAN BE AS WELL RETROFFITTED TO A CNC CONTROL...WITH ADDITIONAL SEVERAL SERVO MOTORS, TO ROTATE HEAD AND MOVE FORWARD. IT HAS CLAMPING SISTEM AND ALL RAILS SAM AS FULL CNC. Machine comes with a lot of tools accessoriess. Machine just turn on and work, ready for operation, Tools from 60 up to 100mm 6 SETS OF TOOLINGS INCLUDED + MANY ACCESSORIESS AND TOOLS Ppelhcdwjvk I Thj Dor We can organize transport and loading.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 17,029 h, Functionality: fully functional, laser power: 2,500 W, Equipment: cooling unit, Round tube min 16 mm max 225 mm - Square/rectangle tube min 16×16 mm - Square tube max 160×160 mm - Rectangle tube max 200 x 200 mm - Bar weight max 35 kg/m - Sheet metal processing limits 3000×1500 mm - Sheet metal weight limits 900 kg - Load 12000 mm - Unload 6500 mm - Single Manual Pallet 3000×1500 mm Pslhcer Nb Akodw Djpr

Condition: reconditioned (used), Year of construction: 2012, operating hours: 45,454 h, Functionality: fully functional, laser power: 1,000 W, Equipment: cooling unit, Configuration: Rear Beam Load 6500 – Unload 4500 Tube Processing Limits: Round tube min 12 mm max 120 mm – Square/rectangle tube max 100×100 mm Tube Weight Limits: Max Bar Weight 13.5 Kg/m Ppslhcdwer Iz Ile Der

Condition: reconditioned (used), Year of construction: 2013, operating hours: 24,564 h, Functionality: fully functional, laser power: 4,500 W, Automatic Loader 12500 – Unload 12500 – Short Pieces Belt – Laser Coherent DC045 – Booster Pslhcder Ndw Rjw Dspr

Condition: reconditioned (used), Year of construction: 2010, operating hours: 40,475 h, Functionality: fully functional, laser power: 3,500 W, Equipment: cooling unit, Rear Beam Load 8500 - Front Step Load 8500 - Exhaust 6500 - Coherent Laser DC035 - Front Collector - Booster - 2 Lenses Pelhcdor Nbxgew Djpr

Condition: reconditioned (used), Year of construction: 2005, operating hours: 62,317 h, Functionality: fully functional, laser power: 2,500 W, Equipment: cooling unit, Load 6500 - Unload 4500 - Laser Coherent DC025 Ppelhcsr Nbw Rjdw Der

Condition: reconditioned (used), Year of construction: 2002, operating hours: 13,399 h, Functionality: fully functional, Pipe diameter 12-30mm Ppelher Nbywscdw Djr Pipe length 200-3000mm