Used Durma Press Brake for sale (177)

Condition: used, Year of construction: 2000, Functionality: fully functional, pressing force: 160 t, bending length: 3,550 mm, stroke distance: 200 mm, controller manufacturer: Delem, controller model: DA 65, TECHNICAL DETAILS Control: Delem DA65 Pressure: 160 t Folding length: 3,550 mm Stroke: 200 mm Oil quantity: 150 l MACHINE DETAILS Machine weight: approx. 11,400 kg Space requirement: approx. 4,700 x 2,100 x 2,700 mm EQUIPMENT Dqjua2 - controlled axes Y1, Y2, X, R - motorized crowning - foot switch - 2x man. stop fingers - Amada /Promecam tool holder

Condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Optional extras: Software D-BEND for 3D bending simulation and alignment R axis CNC (X = 650mm), X, R (double guide, aluminium) Upper dies, CE Lower dies, CE Lower dies, DURMA company Fast die locking system CNC-controlled crowning, with motor Backgauge (1000 mm) - Rear guard with light barrier Oil cooler Additional stop finger and additional front support system Sheets, sliding Special Overseas Packaging 8 meter press brake 800 tons. Bilk9Emkq3 With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA Maschi

Condition: good (used), Year of construction: 2008, The machine is in good technical condition, after previous agreement the possibility of testing. Pressing force 100 tons Working length 3050 mm CNC control system - Cybelec Cqtvjb9Cu8 CNC controlled R axis AKAS motorized opto-barrier 4 inch rear stop 4 sheet metal supports Dimensions (L/W/H) 5300/2600/3100 mm Weight 8500 kg

Condition: ready for operation (used), Year of construction: 2000, Used machine Year of manufacture: 2000 serial number: 753200104 pressing force: 160 t working length: 3550 mm stroke: 200 mm Stroke per minute: 8 Oil tank capacity: 150 l Djqwqn width: 2100 mm working length: 4700 mm Height: 2700 mm Weight: 11400 kg Available from August 2023 Price ex site free truck loaded

Condition: good (used), Year of construction: 2007, Used 3 meter CNC press brake from Durma Ci8Bq83P Type: ADS 30175 capacity: 3100 x 175 ton Year of construction 2007 (delivered 2008) Delem 66w CNC control Y1, Y2, X and R CNC controlled CNC crowning AKAS fiessler laser safety

Year of construction: 2015, Condition: excellent (used), Used modern Axe and Status DURMA AD-R 30175 3metre x 175ton cnc pressbrake for sale Model: AD-R 30175 3050 x 175 Make: Axe and Status DURMA AD-R 30175 Year 2015 Mw2V0U7G Popular Cybelec DNC 880S cnc control Working length mm: 3100mm / 3metre Max. press force kN: 1750 / 175ton 2 axis back gauge – R and X axis 4 axis in total Max.stroke mm: 265 Wila crowning system Euro tooling tool clamps Weight kg 1050

Condition: excellent (used), Year of construction: 2019, operating hours: 2,400 h, Functionality: fully functional, 40 tons press brake with 4 CNC axes back gauge Bskxy9Mnihe Excellent condition with only approx. 2,400 hours (93,000 strokes) Incl. extensive set of tools !!! Manufacturer: DURMA Model: AD-ES 1240 silent Year of construction: 2019 (commissioning: 2020) Maschinennummer:73071915309 Operating hours, approx.: 2,400 h (93,000 strokes) Status: 12/2023 Control system: Cybelec CNC ModEva 19T TECHNICAL DATA: Folding length: 1,275 mm Free stand passage: 1,300 mm Press force: 400 kN Controlled 4-axis backgauge: X, R, Z1, Z2 Stroke length: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Column projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 500 mm/s Infeed speed (Y): 180 mm/s Bending speed (Y): 20 - 40 mm/s Working speed (R): 350 mm/s Travel range R - axis 250 mm Motor power: 7.5 kW Weight: approx. 4,500 kg BASIC EQUIPMENT: Control system: Cybelec ModEva 19T CNC controlled crowning Backgauge: AC servo motors with ball screw INCLUDED OPTIONS: Fiesseler safety system AKAS II M FPSC-B-C Control system: Delem DA 69 T CNC controlled back gauge X, R, Z1, Z2 Hydraulic upper tool clamping Durma (type Wila) Hydraulic lower tool clamping Durma (type Wila) Hydraulic power pack for clamping The machine can be inspected under production conditions. Subject to prior sale. Sale under exclusion of any guarantees and within the scope of our general terms and conditions. All information without guarantee.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, back gauge travel distance Z-axis: 265 mm, pressing force: 220 t, Durma pressbrake for sale. 3m 220t. Bo2Sxfyp We also have a set of tools.

Condition: good (used), The machine is in good technical condition, after previous agreement the possibility of testing. Time to stop 88ms. Range after stopping 10mm. Distance above the sheet metal 240,8 mm. Max Pression 270 kg/m2 Max Print 3915 Psi Cqtn0Usoso

Condition: good (used), Year of construction: 2016, Strength 60 T Folding length 2000 mm Distance between uprights 1700 mm CNC Cybelec Buomqfk2 Vertical stroke 265 mm Working speed 10 mm/s Axis number 4 Engine Power 7.5 kW ----- Length x width x height 3200.0 × 1200.0 × 2750.0 Weight 5410 kg With factory lower and upper tools

Condition: good (used), Year of construction: 1998, Used press brake from 3 meter Brzayaxqwow Type: HAP 30160 Capacity: 3100 x 160 ton ELGO NC control Year of construction: 1998 1 set of tools included

Year of construction: 2004, Condition: ready for operation (used), General Data Measurements width 2100 mm Uuekz0Neq2 Measurements depth 4700 mm Measurements height 2700 mm Machine weight 11800 kg This 4-axis Durma CNC HAP 35160 press brake was manufactured in 2004. It features a 160-ton capacity and a 200mm stroke. Dimensions include a width of 2100mm, length of 4700mm, and height of 2700mm, weighing 11800kg. Ideal for those seeking a robust and reliable press brake, the Durma CNC HAP 35160 machine we have for sale is a significant asset for any workshop. Contact us for further details regarding this press brake. Application Types Pressing / Laminating

Condition: good (used), Year of construction: 2007, Tandem CNC Pressbrake 2 x DURMA ADS 60-400. 6 METRES X 400 TONNES. Dpn7M9 C/W DELEM DA69W CNC CONTROL.

Condition: new, Year of construction: 2024, total height: 2,900 mm, pressing force: 175 t, total width: 1,800 mm, total length: 4,100 mm, overall weight: 11,000 kg, We are selling a new Durma AD-S 30175 hydraulic press brake with Delem 66S control. Delem 66S: - User-friendly - touch screen - Automatic bending sequence calculation and collision detection Dppkmv - 3D machine setup with multiple tool stations - Feedback on product feasibility and handling - incl. PC workstation Durma AD-S 30175: - CNC-controlled axes Y1, Y2, X, R, Z, crowning - Bending length: 3050 mm - Distance between the uprights: 2600 mm - Projection in upright: 650 mm - Installation height: 500 mm - Stroke: 265 mm - Backgauge travel X: 650 mm - Backgauge travel R: 250 mm - Power: 18.5 kW - Rated current: 37 A - Fissler AKAS safety system - Yaskawa drive motors - Rexroth hydraulic components - Rolleri upper and lower tool List price: 92000€ - one-off special offer 84000€. Instruction within Germany included. The machine is available free loaded from Werdau without oil filling. Do you need the machine transported? We will be happy to organize this for you via our in-house forwarding agent.

Condition: good (used), Year of construction: 2006, General data Width: 2170 mm Length: 4250 mm Height: 2800 mm Machine weight: 9450 kg. Cnfsc293Gy Main unit: 1600 kN pressing force. Bending length: 3000 mm Technical machine advantages: - Stroke: 175 mm - Strokes per minute: 8 - Motor: 15 kw Quality advantages of the machine: - Very good condition - Low hours (only around 1000) Blade sharpening required, included in price.

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 320 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Dpdjr9 DURMA press brake AD-S 30320 Standard equipment Capacity (length X ton) 3050mm x 320t Installation height 630mm throat 450mm Stroke 365mm Y1, Y2, X - 3 axes Control unit - DT 15 CE Fiessler Akas manual light barrier Servo motor backgauge & linear guide & Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard Electrical equipment according to worldwide standard Options: Delem 66T Motorized crowning Motorized X, R-axis backgauge X=650mm X and R Lower tool European M.460R.85 Top tool European P135.75.R08

Condition: good (used), Year of construction: 2006, Heavy Durma press brake with 200ton Type E 30200 Capacity 3050 x 200 ton Durma DU 6000 controller Y1, Y2 and X axis CNC controlled CNC Bombering Amada/Euro clamping Cclsq0U9Ry 1 set of tools

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: 2024 (new) Control system: DT 15 Bending length: 4050 mm Distance between the columns: 3600 mm Y fast Speed: 100 mm / s Y Working speed: 10 mm / s Y Retraction speed: 100 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Projection: 450 mm 2 support arms 2 back gauge fingers Travel speed X-axis: 350 mm / s Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm / s Travel distance R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide and ball screw thread Stop finger back gauge with height adjustment (R-axis, manual) CE die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, in accordance with global standards Electrical equipment, in accordance with global standards Option: Bhsoy0Tafj CE certified Motorized crowning and X & R backgauge Engine power 37 kW Oil tank capacity 250 lt Length 5300 mm width 1910 mm Height 3230 mm Weight approx. 20000 kg

Condition: used, Year of construction: 2008, Used CNC press brake from Durma Type: AD S 30220 Capacity: 3100 x 220 ton Delem DA66w Graphic CNC control Y1, Y2, X and R axis CNC controlled CNC crowning YOM: 2008 Isvlddm Rolleri quick change tool clamping 1 set of tools

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: Bending force: 600 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 700 mm Projection: 510 mm table height: 990 mm table width: 154 mm Y High speed: 80 mm Y Working speed: 7 mm/sec. Y retraction speed: 80 mm/sec. X axes working speed: 350 mm/sec. R axes working speed: 300 mm R Axes travel distance: 250 mm X axis distance: 750 mm Engine power: 55 kW length: 8050 mm width: 3200 mm height: 4250 mm Weight: 72000 kg Llrpac22 Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes Bil0h3uvee R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can meet even the most demanding requirements? Then the Durma AD-S 803000 press brake with 3000 tons of pressure could be the perfect solution for your needs. Bliillnu With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows flexible and comfortable positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. In addition, the press brake is a special design and can be configured according to customer requirements to meet all individual needs. If you are interested in Durma press brake, we are at your disposal for personal consultation. Other machines are also available and can be visited. Feel free to contact us for more information and let's find a customized solution for your needs together. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUEL) Sheet metal support system: sliding support arm Stroke: 750 MM Backgauge type: X=1500 X, R Overhang:1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Under tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm Nyjzz table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Year of construction: 2024, Press brake AD-S 40220 | 4 meters 220 tons Everything can be configured on request, very short production and delivery times. We will be happy to send you further information on request. Technical data: Bending capacity: 220 tons Bending length (mm): 4050 Passage between uprights (mm): 3600 Stroke (mm): 265 Installation height (mm): 530 Projection (mm): 410 Table height(mm): 900 Table width(mm): 104 Y Rapid traverse (mm/sec.): 160 Y Working speed(mm/sec): 10 Y Retraction speed(mm/sec.):140 X axles working speed(mm/sec.): 250 R axes working speed (M): 140 R axes travel distance: 250 X axes distance(mm): 650 Motor power: 22 kW Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 14750 kg Standard equipment Control system: CNC Cybelec ModEva 19T CNC controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes backgauge: X1,X2,R1,R2,Z1,Z2 Control unit: DELEM DA-66T Delem 66T - 69T or Durma control is selectable DAM - Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB - PRO - 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB - PRO Powerpack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Bil0Eavl9X Laser bending line Oil heating Manual or motorized central lubrication Air conditioning for control cabinet

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Not37 Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Safety covers on the side 3Ioun292 CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.