Used Lvd Press Brake for sale (84)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Description LVD PPI 55/25 CNC PRESS BRAKE Force 55 tons - bending length 2500 mm Kjdpfx Ajvk Ncqokijnc - CNC MNC 95/C - distance between frame 2050 mm - motor 10 HP - weight 4200 kg INCLUDED A LOT TOLIINGS Specifications Manufacturer LVD Model PPI55/25

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Kedpfx Akewrza Ajionc Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: excellent (used), Year of construction: 2008, power: 42 kW (57.10 HP), pressing force: 320 t, stroke length: 4,000 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, throat depth: 400 mm, clearance between the columns: 3,150 mm, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, overall weight: 23,000 kg, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Knodpfx Akez Rmp Noioc Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1993, operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Kedpj Aaybvsfx Akisnc Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Ksdjzktg Ajpfx Akionc Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Knjdsygkuwjpfx Akijc Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34368, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 170 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table length: 3,050 mm, table height: 950 mm, throat depth: 400 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, Equipment: CE marking, safety light barrier, Hydraulic press brake LVD PPEC-5 170/30 Touch Year of manufacture: 2008 Serial number: 34638 Technical specifications Force: 1700kN Working length: 3050mm Distance between uprights: 2600mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Table width: 150mm Approach speed: 100mm/s Working speed: 10mm/s Return speed: 100mm/s Weight: 11000 kg Motor: 15kW COMMAND CONTROL CNC TOUCH LITE CNC 5 axes Y1 Y2 X R V • Table V-axis PP8170 • Reach of X-axis: 600mm • CE marking “PP3580” Ksdpfxszl Uche Akijnc • Top tool clamping Eurostyle, 15 pcs • Back gauge X-R duo PP8098 • 2 front supports • 2 fingers on back gauge

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table width: 120 mm, table length: 4,270 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 4,270 mm, distance table to ram: 400 mm, clearance between the columns: 3,820 mm, oil tank capacity: 350 l, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, overall weight: 16,950 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Kodpfjz Eqwljx Akijnc Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Knsdpfxezk H A Dj Akisc Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: refurbished (used), Year of construction: 2002, machine/vehicle number: 28668, functionality: fully functional, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, operating speed: 12 mm/s, table length: 4,000 mm, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, Control:Touch-B Axes:Y,X,R,Z1,Z2,XZ,W and EFL Clamping:wila hydraulic clamping Ksdozn Arpepfx Akionc Machine weight: approx. 21000 kg Type: PPEB 220/40 EFL Serial number: 28668 Without tools New R axe spindles New belts : Z axes and tilting Machine front side repainted. New venillators inside the heat exchanger. Wila clamping system checked and realigned,two middle segment changed to new ones.

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 10710, functionality: fully functional, HYDRAULIC PRESS BRAKE LVD PPN 300/30 Year of manufacture: 1982 Serial number: 16270 TECHNICAL SPECIFICATIONS Maximum capacity: 3000 kN Working length: 3000 mm Distance between uprights: 2550 mm Ram stroke: 250 mm Maximum distance between ram and table: 500 mm Gap: 300 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 8.8 mm/s Return speed: 96 mm/s Main engine: 22 kW Weight: 16000 kg Knjdpfx Ajzzxgcskisc NC controller: ELGO X-Y  Solid back gauge with range on X axis: 600 mm  2 fingers on back gauge  2 front supports of 1000 mm TOOLING: a. Multi-V M130, Length: 3050 mm b. Toolholder LVD Classic 15 to LVD Classic 15, Length: 3050 mm c. Straight top tool R15 H130 86°, Length: 3050 mm d. Gooseneck top tool D15 H130 86°, Length: 3050 mm e. Straight top tool R15 H130 26°, Length: 3050 mm

Condition: used, Year of construction: 2012, functionality: fully functional, LVD PPEC-7 135/30 Press Brake For sale: professional hydraulic CNC press brake LVD PPEC-7 135/30. This is a high-class, Belgian-made press brake, known for its precision, reliability, and servo-hydraulic control system. The machine is in full working condition and has undergone a complete technical service – oils and filters have been replaced. Inspection and testing are possible at our warehouse in Vilnius, Lithuania. Key information: Manufacturer: LVD Model: PPEC-7 135/30 Year of manufacture: 2012.10 Bending force: 135 T (1350 kN) Working length: 3050 mm Technical specifications: Distance between uprights: 2600 mm Stroke: 200 mm Table to frame distance: 500 mm Throat depth: 400 mm Approach speed: 100 mm/s Kedpfx Asyxp Eyskijnc Working speed: 11 mm/s Return speed: 100 mm/s Motor power: 11 kW Oil capacity: 275 L Weight: ~10,000 kg Equipment and configuration: Controller: Cadman Lite (2D graphic programming, Quick Bend, collision control) Table: Equipped with automatic deflection compensation system (Crowning – V-axis) Upper tool clamping: Wila hydraulic system Backgauge: X, X’, R, Z1, Z2 Backgauge fingers: 2 pcs. (3 measuring positions, up to 1000 mm measurement) Laser safety: CE – Lasersafe 2 front supports: PP1115 Machine is sold without bending tools Constructional advantages: • One-piece welded frame • Servo-hydraulic system with Y1–Y2 encoders (0.01 mm accuracy) • Precise and stable bending geometry • Suitable for both serial and precision production If you have any further questions, please do not hesitate to contact us.

Year of construction: 1986, condition: ready for operation (used), OFFERED FOR SALE DUE TO OVERCOMPLETION: Well maintained second hand hydraulic press brake, brand LVD, equipped with front support Model PPN 125/4000 S630 Built in 1986 TECHNICAL CHARACTERISTICS Max. pressure force 1250kN Max. oil pressure 310bar Max. working length 4000mm Max. passage between the uprights 3150mm Max. stroke of the ram 150mm Distance table / ram 350mm Unloading 250mm Width of table 180mm Closing speed 90mm/s Working speed 7mm/s Return speed 55mm/s Motor power 10kW Approximate weight 13500kg Steered axes Y1,Y2,X STURING CNC TOUCH S-630 (New 2019) Very user-friendly Full touch screen (10") control with 2D graphic simulation controlled axes: Y,X,R cnc backgauge X-duo - R back gauge with 2 movable fingers Kedpfx Aor Ezv Uskienc ADDITIONAL TOOLS F10 H180 26° 7x508mm + 1x550mm in sections Multi-V M90 L4000mm Asking price excluding transport costs (for buyer). Note: only serious bids will be responded to!

Condition: new, Year of construction: 2023, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Knodpeixz H Esfx Akisc A robust servo-controlled hydraulic system offers precision and high reliability for consistently accurate bending results. Programming of parts is quick and easy with intuitive touch screen control. There are 4, 5 or 7 axis press brakes available. Working length varies from 2000 up to 4000 mm, and the pressing force from 500 up to 3200 kN. Available tooling styles for PPED press brake: LVD style, W style or Univeral. Pressing force: from 500 kN up to 3200 kN Working length: from 2000 mm up to 4000 kN

Condition: good (used), Year of construction: 1992, machine/vehicle number: 20106, Offer 25100 Technical specifications: - Pressure capacity 200 t - Working width 3050 mm - Clearance between columns 2550 mm - Table width 180 mm - Throat depth 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Ram stroke 150 mm - Adjustment range of fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - With: - Backgauge with 2 stop fingers Knodpfx Ajwbgizekiec - Deer foot tool - 4-way universal die - Two-hand control panel, foot switch

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Kedpsy Avnpsfx Akionc Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Hydraulic press brake LVD PPBL 40/20 Year of construction: 1999 Serial number: 25656 Ksdpsy Avr Uefx Akionc Technical specifications Pressing force: 400 kN Working length: 2000 mm Distance between uprights: 1640 mm Stroke: 100 mm Distance table – ram: 300 mm Throat depth: 200 mm Table width: 140 mm Approach speed: 80 mm/s Working speed: 10 mm/s Return speed: 90 mm/s Weight: 3300 kg Motor: 3 kW Options included: ELGO P8822 for X and Y axes 2 fingers on the back gauge

Condition: good (used), Year of construction: 1992, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Control system: LVD MNC 95 Total power consumption: 14 kW Kjdpfx Ajz I N Hwokienc Machine weight (approx.): 7,700 kg

Condition: ready for operation (used), Year of construction: 2006, pressing force: 173 t, Press brake manufactured in 2006. This LVD PPEB 170/30 features a bending length of 3000 mm and a pressing force of 170 tons. If you are looking to get high-quality bending capabilities, consider the LVD PPEB 170/30 machine we have for sale. Contact us for further details. Kjdjz R Dl Ijpfx Akijnc Technical Specification Bending Length 3000 mm

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 5470, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 200 t, stroke length: 250 mm, table width: 250 mm, table length: 3,000 mm, table height: 800 mm, throat depth: 300 mm, ram plate length: 3,000 mm, distance table to ram: 500 mm, clearance between the columns: 2,550 mm, total length: 3,500 mm, total width: 2,000 mm, total height: 3,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Force: 2000 kN Working length: 3000 mm Distance between uprights: 2550 mm Stroke: 250 mm Knedpfxszzxduj Akisc Distance table – ram: 500 mm Gap: 300 mm Table width: 250 mm

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Kodpfx Akjwtmi Esisnc Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) Knodpfozu A Rxex Akisc * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Condition: ready for operation (used), Year of construction: 2009, pressing force: 224 t, Press brake manufactured in 2009. This LVD PPEC 220/42 features a bending length of 4000 mm and a pressing force of 220 tons. If you are looking to get high-quality bending capabilities, consider the LVD PPEC 220/42 machine we have for sale. Contact us for further details. Kodpoz R Dctjfx Akijnc Technical Specification Bending Length 4000 mm

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) Knjdpfozndq Hsx Akijc * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Year of construction: 1971, condition: ready for operation (used), Max. stroke: 100mm, max. press force: 50t, max. oil pressure: 300kg/cm², motor power: 5.5hp, approx. 4kW, pump: Gury 6-16. An inspection on site is possible. Kodezbb R Sspfx Akisnc