Used Emmegi Comet T4 for sale (71)

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, AXIS TRAVELS X AXIS (longitudinal) (mm) 4,000 Y AXIS (transversal) (mm) 470 Z AXIS (vertical) (mm) 420 A AXIS (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool attachment cone HSK - 63F Fpolhccowbwnhsqpeg AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools in magazine 8 Maximum blade diameter that can be inserted into magazine (mm) Ø = 180

Year of construction: 2003, Condition: used, Functionality: fully functional, Emmegi Phantomatic isola t4 cnc aluminum profile machining center Manufacturer: Emmegi. Model: Phantomatic. Model year: 2003. Voltage: 3-phase. Dimensions and weight: Fpslhccsv Rrvaeqpjg Length: 5000 mm. Width: 1700 mm. Height: 2400 mm. Weight: 1550 kg. In working condition. The machine is located in Poland and connected to power - 33350 Piwniczna Zdrój

Year of construction: 2002, Condition: good (used), 4-axis machining center With the Comet, aluminum profiles, PVC materials and steel profiles up to 3 mm can be processed at any angle from 0-180°. Travels: X - axis: 6300 mm Y - axis: 525 mm Z - axis: 335 mm A - axis: 0° - 180° (infinitely variable) Fslhccqju Rry Njpopg max. profile length with reclamping: 12000mm max. profile cross-section: 250x200mm with a tool length of tool length of 80mm Positioning: X - axis: 80 m/min Y - axis: 60 m/min Z - axis: 30 m/min A - axis: 10,800 °/min High-frequency milling motor 7 kW (at 21000 rpm) up to max. 24000 rpm, water-cooled Automatic tool changer with 8 + 1 places, HSK 40E collets, max. tool diameter 50mm, max. tool length 160mm With 8 clamps

Year of construction: 2004, Condition: excellent (used), 4-axis machining center Fpslhcewfw N Tscqpog work range in X: 7000 mm automatic clamp movement

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, 4-axis milling machine 8 pneumatic clamps with automatic positioning automatic toolchange 8 tools Dynamic pendular Fpjlswaa Uushccqpjg usefull lenght 7700 mm

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 2031 mm Measurements depth 10532 mm Measurements height 1920 mm Main Drive Spindle speed range 16500 Spindle motor power 7 kW Number of axis 4 Movement X-Axis Movement 7970 mm Y-Axis Movement 420 mm Fjlhcov S Na Socqpopg Z-Axis Movement 430 mm This 4-axis Emmegi COMET X6 vertical machining centre was manufactured in 2021. Consider the opportunity to buy this Emmegi COMET X6 vertical machining centre. Contact us for more information. Application Types Milling

Year of construction: 2008, Condition: ready for operation (used), 3-axis CNC machining center Travels X: 6000 mm, Y: 525 mm, Z: 335 mm, 7500 mm bed Fpslhcevmfbzjcqpjg Electro-spindle power: 7.5 kW, speed: 20,000 rpm, Maximum magazine 8 tools, with angle transmission and disk milling cutter for machining on 5 faces 8 automatically moving vices Can operate in pendulum mode Year 2008 Serial number: C107787 -CAMPLUS 4.2/3 -DRILL 13.7/1 -JOB 2.8 Number of hours: 3045 h Zeroing video on request

Condition: ready for operation (used), Functionality: fully functional, 4-axis machining center Fjlhccjwfw Ntsqpjpg

Condition: excellent (used), Functionality: fully functional, Working range X : mm. 3100 Electrospindles 1 HSD ISO 30 connection – – max 18000 rpm Tool change positions 3+1 Work table no. 4 clamps Fpelhcev S I D Ajcqpsg Weight: Kg 1950 • Dimensions: mm. 5.472 X 1.900 X 2.200

Condition: good (used), Functionality: fully functional, AXIS COURSES X AXIS (longitudinal) (mm) 7,700 Y AXIS (transverse) (mm) 470 Z AXIS (vertical) (mm) 420 AXIS A (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool attachment cone HSK - 63F Automatic tool holder coupling ● Cooling with heat exchanger ● AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools magazine 8 Maximum number of angle heads that can be inserted into the tool magazine 2 Maximum blade diameter that can be inserted in the magazine (mm) Ø = 180 FUNCTIONS. Multipiece operation ● Dynamic pendulum operation ● Felhccqeu Dktbjpepg MACHINABLE FACES With direct tool (top face, side faces) 3 With angle unit (side faces, heads) 2 + 2 With blade tool (top face, side faces and heads) 1 + 2 + 2 TAPPING CAPACITY With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of vices 8 Maximum number of vices 12 Independent motorized vices ● Maximum number of vices per zone 6 2021/04/01 w

Year of construction: 2002, Condition: good (used), AXIS COURSES X AXIS (longitudinal) (mm) 7,700 Y AXIS (transverse) (mm) 470 Z AXIS (vertical) (mm) 420 AXIS A (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool attachment cone HSK - 63F Automatic tool holder coupling ● Cooling with heat exchanger ● AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools magazine 8 Maximum number of angle heads that can be inserted into the tool magazine 2 Maximum blade diameter that can be inserted in the magazine (mm) Ø = 180 FUNCTIONS. Multipiece operation ● Dynamic pendulum operation ● MACHINABLE FACES With direct tool (top face, side faces) 3 With angle unit (side faces, heads) 2 + 2 With blade tool (top face, side faces and heads) 1 + 2 + 2 TAPPING CAPACITY Fpolhccqerupldspsg With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of vices 8 Maximum number of vices 12 Independent motorized vices ● Maximum number of vices per zone 6 2021/04/01 w

Year of construction: 2007, Condition: excellent (used), Emmegi machining center with 3 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel. The machine features a 6-station tool changer. Both can accommodate an angle head and a side milling cutter for five-sided machining of the workpiece. It is also equipped with a movable work table that facilitates loading and unloading of the workpiece. This significantly increases the maximum machinable profile cross-section. The machine is sold with a saw blade and angle head. The machine has 2 stops (right and left). Fpslhowiiyxsccqpjg The machine has a barcode scanner.

Condition: good (used), Year of construction: 2010, Functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 350 mm, Emmegi Twin Inox steel/stainless steel double miter saw with 3 CNC-controlled axes Fjlhccewii Iioqpjpg Cutting length 6000 mm - longer in automatic mode also possible with automatic saw repositioning up to 10000 mm Redesigned double miter saw with saw blades D = 350 mm The machine can be motor-driven tilted from 135 to 45 degrees and features a pulsed spray system and continuous cooling (oil/water emulsion). Software options for short cuts, overlength cuts, cross cuts, and cyclic cuts are also available on this machine. Data transfer possible (Orgadate, Schücal, etc.) Accessories: Speed adjustment with potentiometer and 2 levels (brushless motors) - Delivery/commissioning/training and connection to software or calculation programs by us ("all-round worry-free" complete package) available for an additional charge

Year of construction: 2015, Condition: excellent (used), Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Fpolswhwplohccqpjg Travel range X-axis up to approx. 4300 mm Y-axis up to approx. 270 mm Z-axis up to approx. 300 mm The profile turning device positions at -90°, 0°, and 90°, eliminating the need for angle heads for lateral machining and fully utilizing the spindle motor's performance range. Minimum-quantity oil spray system 4 clamping elements 8-station tool changer HSK-63F tool holder USB port RJ45 network card Including the following options: Camplus software Shape software MG Pilot control panel Pneumatic reference stop on the right side

Condition: used, Year of construction: 2018, Saw blade diameter: 550 mm Main motor power: 2,2 kW Saw blades tiltable: Yes Pneumatic clamping: Yes Control: Positioning control Type: Cut from back to front Felhccsv Ua Ixjqpopg Width adjustment: electro-motive Conformity marking: CE mark Weight: 1.254 kg

Condition: used, 3 axes Fpelswh A Iaehccqpjg x axis travel : 2400 mm y-axis travel : 240 mm z-axis travel : 230 mm HSD electrospindle 18,000 rpm 4 manual vices

Year of construction: 1998, Condition: good (used), Used Emmegi Automatica 550 Single head cutting-off machine from 1998 in good condition for 90 degress cutting of aluminium profiles, with pneumatic bar feeder and stop, as well as adjustment of cutting length and tolerance op to +/- 0,10 mm of the required size. Folhccotlpl Hsqpepg Specifications: • Blade diameter: 550mm • Blade drive power: 4 kW • Blade drive rpm (50hz): 2840 1/min • Total installed power: 4,3 kW • Operating pressure: 6-8 bar • Max. Feeder stroke: 500mm • Max. Clamp opening, feeder: 410mm

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 7,700 mm, travel distance Y-axis: 420 mm, Emmegi Phantomatic X6 HP 4 axis Machining Centre Year: 2016 Fpslhewbqmqeccqpeg 'X' axis travel: 7700mm

Year of construction: 2012, Condition: excellent (used), Functionality: fully functional, Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles Travel path X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of tenths. This eliminates the need for angle heads for lateral machining and fully utilizes the performance range of the spindle motor. Fpslswiixujhccqpjg 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders). HSK-63F tool holder. Minimum-quantity spray device for 2 different fluids. USB ports. RJ45 network card for network connection. 3D software. Camplus software. Shape software for free programming and lettering. Handheld control unit with display including speed control. Pneumatic reference stop on the left and right sides for multiple assignments. Tunnel on the left and right sides for extra-long profiles. - Delivery/commissioning/training and connection to software or calculation programs by us. ("all-round worry-free" complete package) available for an additional charge.

Year of construction: 2011, Condition: good (used), Roller belt left: 400 cm, roller belt right: 600 cm. Felhswdui Isccqpspg

Year of construction: 2020, Condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Fpsljwfg Hbshccqpeg

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, maximum cutting length 4000 mm Fslhcowh A Erjcqpspg Blade diameter 500 mm stop with automatic positioning for cutting short pieces

Year of construction: 2009, operating hours: 200 h, Condition: like new (used), Functionality: fully functional, !!! Machining center in mint condition with only 200 hours!!! Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles. Travel path: X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of one-tenth. This eliminates the need for angle heads for lateral machining, and the spindle motor's performance range is fully utilized. 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders). HSK-63F tool holder. Fpolhcewiiq Recqpsg Minimum-quantity spray device for 2 different fluids. USB ports. RJ45 network card for network connection. 3D software. Camplus software. Shape software for free programming and lettering. Handheld control unit with display including speed control. Pneumatic reference stop on the left and right sides for multiple assignments. Tunnel on the right for extra-long profiles. - Delivery/commissioning/training and connection to software or calculation programs by us. ("all-round worry-free" complete package) available for an additional charge.

Year of construction: 2013, Condition: excellent (used), Emmegi Twin Inox steel/stainless steel double miter saw with 3 CNC-controlled axes Cutting length 6000 mm - longer in automatic mode also possible with automatic saw repositioning up to 10000 mm Redesigned double miter saw with saw blades D = 350 mm The machine can be motor-tilted from 135 to 45 degrees and features a pulsed spray system and continuous cooling. Fpelhccqjwiiiyepeg Software options for short cuts, overlength cuts, cross cuts, and cyclic cuts are also available on this machine. Data transfer possible (Orgadate, Schücal, etc.) Accessories: Speed adjustment with potentiometer and 2 levels (brushless motors) - Delivery/commissioning/training and connection to software or calculation programs by us ("all-round worry-free" complete package) available for an additional charge

Condition: used, Year of construction: 2014, operating hours: 4,258 h, Functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 300 mm, Equipment: rotational speed infinitely variable, Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles Travel path X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of tenths. This eliminates the need for angle heads for lateral machining and fully utilizes the performance range of the spindle motor. 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders) HSK-63F tool holder Minimum-quantity spray system for 2 different fluids USB ports RJ45 network card for network connection 3D software Camplus software Shape software for free programming and lettering Handheld control unit with display including speed control Folowiidqohccqpepg Pneumatic reference stop on the left and right sides for multiple assignments Tunnel on the left and right for extra-long profiles The machine is fully encapsulated and also has a hood – an extraction system can be connected here, which we are also happy to offer as an additional option. - Delivery/commissioning/training and connection to software or calculation programs by us ("all-round worry-free" complete package) available for an additional charge