Used Emco Emcoturn E65 for sale (149)

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Hfsdpfeyvtugex Ad Hef

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Hjdog Rcf Ispfx Ad Hoff

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Hfodpog Rcf Sefx Ad Hef

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Hfedeu Ibihspfx Ad Hef Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,941 h, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This EMCO Emcoturn 325 features a 3-phase supply voltage of 400 V and a rated current of 9.5 A. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 325 machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Phase: 3-phase (3/PE – three phases + protective earth) • Frequency: 50/60 Hz • Rated current (IM): 9.5 A • Maximum current (Imax): 18 A • Short-circuit current (Ik): 6 kA • Duty cycle: S6 – 40% Technical Specification Hfjdpfoy A Hw Usx Ad Hof Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Hsdpfx Ajy Abbnsd Heff Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Various tool holders

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: S4ES_V16, CNC lathe with main spindle and 12-position turret Make: EMCO, Model: EMCOTURN E45 Year of manufacture: 2019, Serial number: S4ES_V16 Control: Siemens, type Sinumerik 828 Maximum turning diameter: 220 mm Chip conveyor: Manufacturer Bürener, type SPE62/12 ----- Attractive offer – flexible & worry-free Hedpfx Adsyzn Tnj Hsff We offer you not only a high-quality product, but also tailored financing options to suit your needs. Whether down payment, installment payment, or custom financing models – together we will find the right solution. On request, we also take care of the entire transport organization. From planning to reliable delivery, we ensure a smooth and on-time process, so you don't have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding quote. We provide personal and competent advice. Subject to prior sale, modifications, and errors!

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R2EU2002, CNC lathe with main spindle and 12-station turret Manufacturer: EMCO TURN E45 Year of manufacture: 2002, Serial number R2EU2002 Hfodpsyzn N Njfx Ad Hof Control: Siemens, Sinumerik type Bar feeder: EMCO Compact Load E45 Turning diameter: 220 mm Chip conveyor: Knoll Attractive offer – flexible & hassle-free We offer not only a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you. Upon request, we can also take care of the entire transportation process. From planning to reliable delivery, we ensure a smooth and on-schedule operation so you don’t have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We offer personal and competent advice.

Condition: used, Year of construction: 2016, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2016 Control : Siemens 828D - ShopTurn Turning diam. : 500 mm Turning length : 520 mm Mainspindle: Technology:Belt-driven spindle Speed:5.000 rpm Power (max.):22 kW Torque (max.):305 Nm Barcapacity:65 mm Workpiececlamping:3-Jaw chuck, SMW Autoblok 210 BB Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:5.000 rpm, 5 kW, 20 Nm Movement in X/Y/Z:260/80/610 mm Rapid travers in X/Y/Z:30/15/30 m/min Tailstock: Technology:Hydraulic driven Tailstockforce (max.):8.000 N Stroke:500 mm Cone:MK4 Equipment/Accessory: Chipmanagement:Chiptray Coolingmanagement:Internal coolant pump with High-pressure, 14 bar Rawmaterialfeed:Interface Barloader prepared Finishedpartremoval:Partscatcher with conveyor belt Toolholder:Misc. used static and driven tools Further Equipment:Rinsing pistol Hfedpfoyxuhyox Ad Hef

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 85 mm, turning length: 300 mm, spindle bore: 25 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 60 rpm, total height: 1,900 mm, total length: 1,700 mm, total width: 1,300 mm, overall weight: 1,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E25 CNC Lathe with Siemens Control Condition: Very well-maintained, fully operational Location: Graz Manufacturer/Model: EMCO EMCOTURN E25 Control: Siemens Year of manufacture: 2008 IMAGES/VIDEOS: For additional images and videos of the running machine, please send us your request. Hodpfxeyxvwij Ad Hoff Technical Specifications: Working area: X-axis travel: 100 mm Z-axis travel: 300 mm Tool turret: 12 stations Turning diameter: Ø 85 mm Swing diameter: 225 mm Spindle bore: Ø 25.5 mm Speed: Minimum: 60 rpm Maximum: 6300 rpm Coolant pump: Yes Machine weight: 1400 kg Dimensions: Length: 1700 mm Width: 1300 mm Height: 1900 mm Contact: Please feel free to contact us to arrange a viewing appointment or to receive an offer!

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Hfodsw Rrvwjpfx Ad Hef Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2DU2101, CNC lathe with main and sub spindle, featuring two 12-position turrets and double bar feeder. Make: EMCO, Model: TURN 332MC Plus Year of manufacture: 2006, Serial number: R2DU2101 Control system: Siemens Maximum turning diameter: 220 mm ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment plan, or individual financing model – together, we will find the solution that fits your needs. Upon request, we can also arrange complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so that you do not have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We provide personal and professional advice. Hedjyzn U Eepfx Ad Hjff Subject to prior sale, modifications, and errors!

Condition: like new (used), Year of construction: 2022, operating hours: 650 h, functionality: fully functional, machine/vehicle number: S6E222101, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 500 mm, The machine is in like-new condition with only 650 operating hours. It is in excellent optical and technical condition. Hfsdpjyn Aahsfx Ad Hjf

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit Hodpfxsycvaqo Ad Hoff - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: good (used), Year of construction: 2007, with UniRobot FMB Control: SIEMENS 828D Bed swing: Ø 540 mm Cross slide swing: Ø 360 mm Hfjdpfxev S Ekyo Ad Hsf Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel: X = 210, Z = 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm continuously variable Max. torque: 192 Nm C-axis Rapid traverse: 1000 rpm TOOL TURRET 12 stations all driven Mounting: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Internal taper: MK 4 FMB MH5L-XP robot cell With Yaskawa Motoman MH 5 L robot Max. payload: 5 kg Max. working radius: 895 mm Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (hand roller): -190° ~ +190° B-axis (joint/articulation): -135° ~ +135° T-axis (hand rotation): -360° ~ +360° With coolant system Chip conveyor, extraction system Total weight (machine/robotic): approx. 5300 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 64,297 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, controller model: FANUC SERIES 18i-TB, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item punctually, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Turning length: 350 mm Turning diameter: 114 mm Spindle speed (max): 8,000 rpm Bar capacity: 25.4 mm Hjdpfjyn Nuxex Ad Hjff Centre distance: 445 mm Spindle distance: 485 mm Travel X-axis: 100 mm Travel Z-axis: 320 mm Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 30 m/min Torque: 30 Nm Swing diameter over cross slide: 325 mm MACHINE DETAILS Control: FANUC SERIES 18i-TB Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,100 mm Total weight: 2,500 kg Control manufacturer: FANUC Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 26 A Operating hours (according to display): 64,297 h EQUIPMENT Tailstock Main spindle Tool turret (12 positions) Driven tools (6 pieces) Y-axis

Condition: ready for operation (used), functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item within the specified time frame: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X: 190 mm Travel Y: 140 mm Travel Z: 260 mm Hfjdeym Ak Dspfx Ad Hjf Tool holder: SK 30 (presumably) Maximum tool clamping length: 35 mm Table dimensions: 420 x 120 mm Jaw width: 60 mm MACHINE DETAILS Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A EQUIPMENT Special machine vice: EMCO vice with 2 slots Mobile workbench: incl. various suitable contents Tool changer: 7 positions Collets Various suitable tool holders Note: An identical machine with the same specifications will be delivered, but not necessarily the exact unit shown in the photos.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, controller model: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840), turning length: 300 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obliges you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Turning length: 300 mm Centre height over bed: 100 mm Hjdpfsymz T Dex Ad Hjff Travel X-axis: 100 mm Travel Z-axis: 200 mm MACHINE DETAILS Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A EQUIPMENT Tailstock Three-jaw chuck Special turret Mobile workbench Matching accessories Note: An identical machine of the same design will be delivered; not exactly the one shown in the photos.

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Hedpfoy Alrwjx Ad Hjff Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,000 h, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC620 HSCI, total height: 3,032 mm, table load: 50 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,000 W, number of axes: 3, This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking to get high-quality machining capabilities, consider the EMCO MAXXMILL 350 vertical machining centre we have for sale. Contact us for further details. • B-axis swivel range: ±100° • C-axis swivel range: 0–360° • Spindle torque: 33 Nm • Tool magazine: 50 positions • Table surface: Ø 400 mm • Table T-slots: 5 slots, 14 mm size, 75 mm spacing • Table height: 860 mm above floor • Transport dimensions: approx. 1600 mm x 2295 mm • Spindle hours: 11,000 Additional equipment • Automation: Lang Eco Compact 10 (fully configured/functional) • Chip conveyor: Yes • Included accessories: Extensive ISO30 tool holder package • Special feature: Custom-made workspace hood/cover Technical Specification Taper Size ISO 30 Hsdoy Aw Nzjpfx Ad Hsff

Condition: ready for operation (used), A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible. Hodpfx Adey Anubs Hjff

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mm Turning length : 800 mm Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:76 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Eilgang in X/Y/Z:30/12/30 m/min Hodpfxjy A U Izs Ad Heff Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Eilgang in X/Z:30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Hfodpfx Aeu N Dpmsd Hef Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: excellent (used), Year of construction: 2017, operating hours: 13,880 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, Fixed angle table with a clamping surface of 800 x 400 mm. Max. table load approx. 300 kg. Spindle: speed range: 10 – 5,000 rpm (stepless). Drive power: 7 / 10 kW (continuous operation / 40% duty cycle). Tool holder: SK 40 (DIN 69871). Feed: 10 – 2,000 mm/min (rapid traverse up to 5,000 mm/min). Weight: approx. 2,200 kg. Hfsdey Anhhjpfx Ad Hsf

Condition: used, Emco F3 - Milling Machine Hodpjy A Sdyefx Ad Heff Accessories: - Vice - Workplace lighting - Coolant system - Tools & machine feet - Operating manual Technical specifications: Working area: - Longitudinal travel: 300 mm - Transverse travel: 200 mm - Vertical travel: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Swiveling vertical milling head: ± 90° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Slot spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: extraction bolt M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slide: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (stepless) - Rapid traverse: 1200 mm/min Coolant system: - Tank capacity: 30 l - Pump capacity: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% duty cycle) - Speed: 1400 / 2800 rpm Dimensions: - Dimensions W x H x D: approx. 1200 x 1900 x 1400 mm - Machine weight: approx. 450 kg