Used Felder Edgebander for sale (115)

Condition: used, Felder G680 edge bander, pre-milling cutters, glue application by roller, pneumatic pre-cut guillotine, pressure rollers, finish-trimming saws, top-bottom milling unit R1 – R2, corner rounding unit, profile scraper, flat scraper, polisher. Edge thickness 0.4–3 mm, max panel height 50 mm, total power requirement 7.22 kW, machine length 405 cm. The corner rounding unit requires inspection as it is not functioning properly. Iedpfxsyufawe Anweic

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages Iodow Axi Aopfx Anwoic - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 22 A, type of input current: three-phase, volume flow: 6,920 m³/h, intake vacuum (max.): 2,630 mbar, suction capacity: 8,000 m³/h, intake manifold diameter: 350 mm, overall weight: 825 kg, Equipment: CE marking, documentation/manual, We are offering this very well-maintained FELDER RL 350 stationary extraction system, year of manufacture 2023, including all pipes and shut-off dampers. Serial number: 35.03.120.23 Rated voltage: 400.0 V Number of phases: 3 Rated current: 22.0 A Rated power: 11.0 kW Year of manufacture: 2023 Extraction port diameter: 350 mm Motor speed: 2,900 rpm Nominal volume flow (at 20 m/s): 6,920 m³/h Negative pressure at nominal volume flow: 2,630 Pa Weight: 825 kg Main fuse: 32 A Including silencer 5 electropneumatic slide valves and control system Extinguishing device included If you have any questions or require further information, please feel free to send us a message or give us a call. Iijdpfoytq Dxjx Anwoc

Condition: excellent (used), Felder F 700 Z Spindle Moulder 205 cm sliding table integrated in the worktop, Spindle adjustable in height and tiltable 0-45 degrees, Iisdsyn Iu Repfx Anwoc Interchangeable 30 mm spindle, 7.3 kW motor, electric brake, Forward and reverse rotation, 4 spindle speeds, Very good condition, fully ready for operation.

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, – Austrian production – X-Roll sliding carriage guide system – DTR and CE user manuals TECHNICAL SPECIFICATIONS: – Carriage length: 2050 mm – Cutting width (right): 1250 mm – Max. blade diameter: 315 mm – Scoring unit diameter: 100 mm – Main motor: 5.5 kW – Scoring unit motor: 0.75 kW – Brake – X-Roll guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Possibility to install cutter: thickness: 6 - 20 mm – Max. diameter: 228 mm Iodpfeym Amlox Anwoic – Pawl – Blade guard – Extraction port diameter: 50 and 120 mm – Dimensions (L/W/H): 220 / 200 / 130 cm – Weight: ~ 550 kg

Condition: like new (used), Panel saw Format4 kappa 550 CNC Sliding table 320 cm, Max. blade diameter 550 mm Blade tilt and height are motorized, Right-side rip fence motorized, adjustable up to 1599 mm, Iiodpfeylxbcox Anwjc Fence on sliding table motorized – simply enter the dimension and it sets automatically Fence can be set at an angle 3-axis scoring unit electrically adjustable with parking function Main motor 7.35 kW, 3 cutting speeds Used machine, condition as new

Condition: excellent (used), Thickness planer Felder D963 Iodpfx Ansxdmu Tewsic Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition.

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition Iiedpfx Ansx A Exuswjc

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Iiedpfjxxavmjx Anwjc Machine ready for operation, quiet

Condition: like new (used), Year of construction: 2024, For sale is a used Felder RL-300 clean air extraction unit with a maximum air flow rate of 6,000 m³/h. The extraction unit is in very good condition and has been inspected and refurbished by our qualified staff. Technical Data: - Extraction capacity: 6,000 m³/h Iedpfx Asxdlwmsnwsic - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip collection volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic fire extinguishing system with powder extinguisher - Steel impeller - Motor power: 8.2 kW - Year of manufacture: 2024 The clean air extraction unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air extraction unit, clean air, RL Reference: R-S1522

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Iedpfjyf I T Ujx Anwjic Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Ijdpfxjyfxa Eo Anwjic

Condition: like new (used), Year of construction: 2024, For sale: Felder RL-160 clean air extraction unit with a maximum air volume flow of 3,200 m³/h. The extraction unit is currently in use as a demonstration model in our showroom and is therefore in as-new condition. Technical data: - Max. air volume flow: 3,200 m³/h Iiodpfx Anjyh Ai Hswsc - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Isdpfx Anjxix Hxjweic Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Feed speed 8 m/min. Ijdpfx Ajxpn Ufonwjic

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Ijdeyf A N Djpfx Anwoic Required air pressure: 6-8 bar Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Ijdpoyfvhaofx Anweic Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Iisdpfx Aoxbq Uljnwjc Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Iodpsxl Dw Uofx Anwsic Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker - Steel impeller - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2022 - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Iodjxdkzqopfx Anwsic Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-L0CE0

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available Iiedpfsw H Rzxox Anwec TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: used, Year of construction: 2017, Fw 1102 Perform Year of manufacture: 2017 5 operating hours 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Extraction connection: 2 x 160 mm and 1 x 120 mm Isdpjxrwn Tefx Anwoic Vacuum carpet with integrated blower in the machine frame 1st unit: rubber-coated profiled contact roller 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts

Condition: excellent (used), Year of construction: 2010, 4 kW motor 4 knives Table length 198 cm Table width 41 cm Iiedpsul Utmofx Anwec

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: Ijdpfx Aowp Ri Usnwsic - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: Iiedpjxlr U Iofx Anwec - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg