Used Heesemann Ksa 8 for sale (28)

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, VERY WELL MAINTAINED MULTI-PURPOSE SURFACE SANDING MACHINE WITH CROSS AND LENGTHWISE BELT; SUITABLE FOR WOOD CALIBRATION SANDING; WOOD SURFACE SANDING AND INTERMEDIATE LACQUER SANDING. Working width max. 1,300 mm Conveyor belt with vacuum device Transport blasting device with pressure regulator Feed motor 1.5 KW Feed rate 3 - 15 m/min CSD - Computer controlled selective pressure regulation technology with 2 mm tolerance compensation Spacing of the control rollers 16 mm, pressure shoe pitch 48 mm, switch distance 82 mm Unit equipment: 1) Cross sanding unit Belt dimensions with lamellar intermediate belt Sanding belt dimensions 15 x 4,800 mm Sanding belt speed infinitely variable can therefore be used for surface and lacquer sanding Pgjljumtg Iehcdw Dok 2) Longitudinal sanding unit with sanding drum and sanding pad combined, therefore suitable for calibration sanding as well as for wood and veneer surface sanding Infinitely variable sanding belt speed, therefore also suitable for can also be used for lacquer sanding Sanding belt dimensions: 1,350 x 2,620 mm Control system: Machine control unit on the right-hand machine control unit 20 programs can be stored Transport dimensions: 2.4 x 2.2 x 2.35 m Weight approx. 5.4 tons

Condition: used, machine/vehicle number: 006530, Max. machining width: 1300 mm Pslhcdswcybmow Dogk Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 8 Nr

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, motor voltage: 400 V, frequency: 50 Hz, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Pelhcdju Hlzfsw Dogk Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: used, Year of construction: 2012, operating hours: 60,000 h, Functionality: fully functional, feed rate X-axis: 12 m/min, workpiece weight (max.): 50 kg, working width: 1,350 mm, total length: 62,000 mm, total height: 2,800 mm, total width: 3,200 mm, type of input current: AC, working height: 120 mm, input voltage: 400 V, suction capacity: 36,000 m³/h, input current: 800 A, input frequency: 50 Hz, power: 440 kW (598.23 HP), compressed air connection: 6 bar, complete lacquering line: 1x Heesemann sander (LSM 8, 2006.10.251, 2006, 2x roller / 2x pads, ) 2x Safo brushing machne (2006, DCSF 135 2W) 1x Cefla lacquering spray Cabin (2012, Roctre D/HS) 3x Cefla hot air drying tunnel (2012, Aquadry LA ) 1x Cefla cold air drying tunnel (2012, Aquadry RLA) Pgelhcdsv T Ttxow Dsk 1x UV lamp dryer ( 3lamps, UV-R SPM3/2500s) 2x hydraulic lifters (200-900mm height)

Condition: not inspected (used), Year of construction: 2006, Wide belt sander Grinding width: 1300 mm Manufacturer: Heesemann Model: LSM 8 Pgslhcdeulxdcew Djk Year of production: 2006 Technical condition: used, for technical inspection

Condition: good (used), Year of construction: 2008, Functionality: fully functional, grinding width: 1,300 mm, grinding height: 80 mm, grinding belt length: 3,250 mm, grinding belt width: 1,350 mm, TECHNICAL DETAILS Width: max. 1,300 mm Thickness: 3 - 30 mm Function: sanding and finishing of solid wood Feed: 80 m/min Work table and transport Work table: fixed height Vacuum carpet: yes Drive carpet: yes Working level: yes Height: fixed for processing in line Pgslhcdjv Ebb Iew Dek Number of working units: 8 Operating unit 1 Unit: roller Roller diameter: 250 mm Operating unit 2 Unit: roller, rubber Roller diameter: 400 mm Sanding belt width: 1350 mm Sanding belt length: 3250 mm Operating unit 3 Unit: roller, rubber Roller diameter: 400 mm Operating unit 4 Unit: tampon Tampon: vertical Operating unit 5 Unit: tampon Tampon: vertical Operating unit 6 Unit: brush Position: top Operating unit 7 Unit: blowing devices Operating unit 8 Unit: blowing devices CE marking: yes Total installed power: 260 kW

Condition: used, 2 belt cross sander Heesemann MFA 8 for intermediate sanding of varnish and sanding of wood panels and other workpieces. working width: 1300 mm Clearance height: max. approx. 140 mm Pslhcdjvazu Rsw Degk Aggregate 1: cross-section Aggregate 2: longitudinal grinding

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 - Transport bed: 3.0 kW FU 4.0 kW - Feed speed (m/min.): 5 - 25 Pgsljtt Slcehcdw Dek - Workpiece conveyor belt suction clamping system (kW): 7.5 - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, feed rate X-axis: 25 m/min, working width: 1,350 mm, overall weight: 7,000 kg, height adjustment type: electric, grinding belt length: 3,250 mm, table height adjustment: 137 mm, air demand: 213 m³/h, input voltage: 400 V, Good day, We present for purchase a Heesemann LSM8 wide belt sander from 2009, equipped with two longitudinal sanding units, a reading keyboard with sensors every 16 mm - the most accurate reading used in Heesemann. Working width: 1350 mm Working height: 880 mm Transport belt feed speed: 5-25 m/min Height of processed elements: 3-140 mm Pslhjwca Nkjcdw Dsgk Transport belt cleaning system - blowing off and extracting dust. At the entrance to the machine and at the exit - transport rollers supporting the elements. Element pressure rollers - fi 70mm New, colorful, touch control panel. Longitudinal unit 1 Abrasive belt: 3250x1400 mm + abrasive belt cleaning Belt speed: 0.5-20 m/s - 22kW engine power, smooth adjustment - inverter Combi unit - possibility of performing light calibration work "Door in door" system - possibility of monitoring work in real time Pressure foot - SCD system - electromagnetic pressure. Longitudinal unit 2 Abrasive belt: 3250x1350 mm + abrasive belt cleaning Belt speed: 0.5-20 m/s - 22kW engine power, smooth adjustment - inverter "Door in door" system - possibility of monitoring work in real time Pressure foot - SCD system - electromagnetic pressure. Dust extraction: Dust extraction brush fi 150 mm - Tampico + dust blowing rotors. The machine is in very good condition, 100% efficient, after mechanical repair, bearing replacement, shaft regeneration - ready to work. Possibility of performing tests on site.

Condition: used, Year of construction: 2006, operating hours: 100,000 h, Functionality: fully functional, feed rate X-axis: 30 m/min, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 48,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 68,000 mm, total width: 2,600 mm, working height: 75 mm, power: 720 kW (978.93 HP), input frequency: 50 Hz, input current: 1,800 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, compressed air connection: 6 bar, complete lacquering line: 2x Heesemann sanders (LSM8 2006.12.141, 3rollers-3pads/ LSM8 2006112.151, 2pads) 2x Heesemann cleaning mach. (EA8 2006.12.142 / EA8 2006.12.152) 1x Cefla hot air drying tunnel (FEV EU2/8 6 IRM / TNSL) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRU+TN 4000/HT / 4lamps UV 2000 M2+CRU+TN 5000/HT / 2lamps / 4 lamps) 2x stain roller coaters ( Smartcoater M-EVO / model M) 2x heavy putty roller coaters (Smartcoater SP / SP1-EVO) 3x lacuer roller coaters (Smartcoater MF) 10x belt/roller conveyors 2x hydraulic lifters (200-900mm height) Pgjlhjv Ta Tfjcdw Dek

Condition: ready for operation (used), Year of construction: 1994, Operating voltage: 380V Frequency: 50Hz Weight: 7500 Current consumption: 172 A Year of manufacture: 1994 Calibration: Standard: 1350 x 2620 mm Cross-grinding: Standard: 5400 x 150 mm Longitudinal grinding: Standard: 1350 x 2620 mm Polhcdwst Dk Sio Dogk Machine dimensions Working width: 1300 mm

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 Longitudinal sanding units: - Longitudinal sanding unit 1: Sanding belt speed 24 m/s - Longitudinal sanding unit 2: Sanding belt speed 24 m/s - Longitudinal sanding unit 3: Sanding belt speed 24 m/s Pgjlhcdstt Sb Tsw Djk - Longitudinal sanding unit 4: Sanding belt speed 10 + 20 m/s - Longitudinal sanding unit 5: Sanding belt speed 10 + 20 m/s - Longitudinal sanding unit 1: Motor power 55 kW - Longitudinal sanding unit 2: Motor power 55 kW - Longitudinal sanding unit 3: Motor power 45 kW - Longitudinal sanding unit 4: Motor power 18 / 21.5 kW - Longitudinal sanding unit 5: Motor power 18 / 21.5 kW - Brushing unit: Brush roller diameter 150 mm - Drive for brushing unit (kW): 1.5 - Transport bed: 11 kW FU 22 kW - Feed speed (m/min.): 5 - 25 - Workpiece suction unit (kW): 15 - Total weight (kg): 12800 - Total power connection (kW): approx. 245

Year of construction: 1997, Condition: good (used), - Working width (mm): 1300 - CSD system Pslhcjidi Ivsdw Degk - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Condition: used, Year of construction: 2002, machine/vehicle number: 200207102, - Manufacturer Heesemann - Type. MFA 6 - Year of construction 2002 - 1st unit: - Longitudinal belt - Electronic sanding pad, CSD system - Sanding belt speed 1.8 - 18 m/s - Sanding belt dimensions 2620 x 1400 mm - Motor power 15 kW Pgelheuulpdjcdw Dok - 2nd unit: - Longitudinal belt - Electronic sanding pad, CSD system - Sanding belt speed 1.8 - 18 m/s - Sanding belt dimensions 2620 x 1400 mm - Motor power 15 kW - Distance between the tracing rollers 16 mm 3rd unit: - Scotchbrid brush - Dust brush 1 pc. - Operating side left - Touch screen with graphic display - Extended table, infeed - Upper section adjustment - Motorised height adjustment - Infinitely variable feed speed 3 - 10 m/min - Vacuum conveyor belt, NEW - Suction nozzle D 2x180 + 1x140 mm - Suction capacity on site 20 m/s - Compressed air consumption nB. - Length 2,385 mm - Width 2,300 mm - Height 2300 - 2450 mm - Weight 3800 kg - Location, in stock - Switch cabinet integrated in machine - Total connection 47 kW - Volt, Hz 400/50Translated with (free version)

Condition: used, machine/vehicle number: 007766, Position 1: Roller Conveyors BURKLE + HEESEMANN-. Position 2: Brushing Machines BURKLE + HEESEMANN-. Position 3: Roller Conveyors BURKLE + HEESEMANN-. Position 4: Roller Spreaders BURKLE + HEESEMANN-. Pgelhcdev Akwmsw Dek Position 5: Roller Spreaders BURKLE + HEESEMANN-. Position 6: Ovens BURKLE + HEESEMANN-. Position 7: Roller Spreaders BURKLE + HEESEMANN-. Position 8: Roller Spreaders BURKLE + HEESEMANN-. Position 9: Ovens BURKLE + HEESEMANN-. Position 10: Roller Conveyors BURKLE + HEESEMANN-.

Condition: used, Year of construction: 1992, Functionality: limited functionality, machine/vehicle number: 9205151, The grinder is ready for use and features additional dust extraction. Pgslhcswdt A Hjdw Dok Control cabinet included. Can be used as a spare parts supplier for motors, controls, switches, rollers, etc.

Year of construction: 1998, Condition: good (used), Special profile sanding machine not in throughfeed , but with support. The sanding units are at right angles to the passage, ideal for intermediate sanding of polyester lacquers. 6 aggregates Polhsfyndrocdw Djgk

Condition: new, Year of construction: 2025, Functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS Pgsljwcqr Aehcdw Dsk - Doors with glass inserts - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Year of construction: 2022, Condition: new, 1 HEESEMANN Demo Multi-purpose surface sanding machine Year of construction 2022 Working from the top – Sanding width 1,600 mm ROLLER/LONGITUDINAL/DB-S 1 construction with transport bed Continuous transport carpet, transport belt cleaning device, variable feed speed 5 - 25 m/min, constant working height 880 mm, machine upper part motorically adjustable according to panel thickness (3 - 150 mm), including integrated control cabinets. 1 Pressure roller (Ø 70 mm) 1 Industrial PC 21,5” Full HD Program memory for 1000 programs 1 Longitudinal sanding unit with contact roller for calibration work (steel) Diameter: 250 mm Sanding belt dimensions: 2,620 x 1,650 mm Belt speed: 24 m/s Drive power: 30 kW 1 Longitudinal sanding unit with pressure segment belt Sanding belt dimensions: 2,620 x 1,650 mm Belt speeds: 1.8 - 9 m/s (with pressure lamella belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 22 kW frequency converter Continuous adjustment of sanding belt speeds 1 Pressure beam with computer-controlled selective pressure regulation - CSD® system 1 Rotating disc brush unit DB-S Pgslhcomqma Hsdw Djk 12 driven disc brushes, operating in 2 directions of rotation. 1 Brush roller unit Panel clamping system For the secure transportation of panels shorter than 500 mm in the feed direction, including an integrated fan. 1 Panel blasting device with rotating compressed air nozzles

Condition: used, Year of construction: 1996, Max working width : 1300 mm Stand in line machine ( Fixed table hight : 880 mm ) 1. Rubber drum ( Score 70-80 ) 2. Electronic Segmented pad 3. Disk unit with 8 rotating disks ( diameter 250mm ) Sanding paper : 2620 x 1350 mm Total Kw : 57 Pslhcov Edhwjdw Djgk Total Amp : 110 Weight : 6100 Kg

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Pgolhjvxrynecdw Dsk Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2007.10.191, with Heesemann dust extraction machine, type: EA 8 Grinding width: 1350 mm Pelsv Enzushcdw Dsgk Workpiece height: 3 – 150 mm Units: 3 x cross grinding units, each 15 kW; 1 x longitudinal grinding unit with pressure lamella belt 15 kW; 1 x brush roller unit 0.75 kW; Total power connection: approx. 80 kW Total air requirement: 193.5 m³/min

Condition: used, Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 2019.09.271, working width: 1,350 mm, type of input current: three-phase, table height: 950 mm, Machine start date: 2022 Grinding width: 1,350 mm for carbon steel, stainless steel, aluminum Stand construction with transport bed: feed speed 0.5 - 5 m/min fixed working height of the table 950 mm (+/- 20 mm) Suction system for clamping processed parts Suction system for clamping processed parts for safe transport of processed parts with a length not exceeding 500 mm in the feed direction with a built-in fan with a power of 4.0 kW. Pgolev Hp Tbehcdw Dek 15.6" industrial computer LCD TFT color display Windows Embedded Standard operating system Touchscreen version With display of production and downtime times Ethernet connection possible. Micro-burring and longitudinal grinding unit with rubberized contact roller – hardness approx. 60° Shore Diameter: 250 mm Sanding belt dimensions: 2,620 x 1,400 mm Belt speed: 1.7 – 28 m/s Drive power: 22 kW Machine paint finish: Internal paint: anthracite according to RAL 7016 External paint: gray according to RAL 7035 Door: made of multi-layer safety glass tinted Belt loading side: on the left Terminal: left Operating voltage: 400 V, 50 Hz

Condition: new, Year of construction: 2024, Functionality: fully functional, grinding width: 1,350 mm, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,620 mm, grinding belt width: 1,400 mm, Heesemann multi-purpose surface grinding machine, type HSM .4 NEW Edition RQHD ROLLER/TRANSVERSE/LONGITUDINAL DLB/DB-S Sanding width 1,350 mm Stand construction with transport bed With continuous transport carpet, feed speed 3 - 15 m/min. frequency-controlled, workpiece thickness (3 - 200 mm) motor-adjustable Automatic workpiece thickness measurement in the machine infeed Workpiece suction clamping system with adjustable vacuum for transporting workpieces shorter than 500 mm in the feed direction, integrated fan with frequency converter, drive power 2.2 kW Non-driven rollers (2 each in the machine infeed and outfeed) Industrial PC 15.6" (permanently installed) Multitouch color display, CF card, Windows Embedded Standard operating system, touch screen version, display for production and downtimes. Ethernet connection possible. Program memory for 100 programs Program for remote maintenance Program for extraction flap control For the extraction flaps/sliders to be installed by the customer, the external pneumatic valves can be controlled with any external operating voltage, e.g. (115V AC / 230V AC / 24V DC) via the pre-installed, potential-free relay contacts. MMI package consisting of: - Intuitive machine operation with self-explanatory symbols - Outfeed and infeed LED strips as operator assistance for the workpiece (infeed workpiece positioning for better sanding belt utilization, outfeed indicates workpiece position) - Belt manager status display on the unit (screen) - Aggregate information with grain size (screen) - Visualization of the position of the workpiece as it passes through through the machine. - Video camera in the outfeed of the machine 1 contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 cross sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Pelhcdwju Ic Rgs Dogk Drive power: 15 kW Frequency converter 1 longitudinal sanding unit with pressure flap belt system Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 9 m/s (with pressure flap belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 15 kW frequency converter Infinitely variable adjustment of the sanding belt speeds, wear-free braking device, automatic compensation of any differences in belt edge lengths, sanding belt working in counter-rotation, oscillating sanding belt cleaning, adjustable. 2 pressure bars with computer-controlled selective pressure control system CSD® (10 year warranty) In addition, the electromagnetic CSD® system is maintenance-free, as there is no risk of contamination as with pneumatic elements. 1 Rotating disk brush unit DB-S 10 driven disk brushes, working in 2 directions of rotation, central height adjustment for abrasive wear, incl. quick-change device for disk brushes Brush fill: Flex-Trim Diameter: 150 mm Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply for belt tracking monitoring in the event of a temporary interruption in the power supply Energy Management System EMS Belt support side: left Terminal: front left Workpiece stripping device LED lighting inside the machine (on the belt support side) Further information on request.

Condition: good (used), Year of construction: 1995, Multi-purpose surface sanding machine, paint sanding machine, assembly kit, finishing unit, sanding unit, sanding station, belt sander, belt sander -Max. Sanding belt width: 1350 mm -oscillating -Drive: 11 kW -Speed: frequency controlled -Max. Passage height workpiece: 140 mm - Sanding belt dimensions: 2620 x 1350 mm -Dimensions machine: 221H2310 mm Pgeljgnnbvehcdw Dsk -Weight machine: 4500 kg