Used Holzkraft Hse 16-1100 for sale (167)

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Lrsdpehkz Hmefx Al Teu Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: new, - New -Description:- Vertical version for splittingShort and meter wood- Robust and solid construction- Shock and scratch resistant due to high qualitypowder coating- Fast, tool-free gap height adjustment- Low base plate for easy,effortless loading of large logs- Phase inverter on all 400V models- Convenient transport with hand drawbardue to standard chassis with largePneumatic wheels and additional support wheel- Space-saving storage through simplelowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical specifications:Dimensions and weightsLength approx. 1050mmWidth/depth approx. 1700 mmHeight approx. 2500mmWeight approx. 373.1 kgdrivePTO speed 540 rpmInput power 5.5 kWelectrical dataConnection voltage 400 VMains frequency 50 Hzdevice dataSplitting power max. 26.1 tGap length min. 560 mmGap length max. 1100 mmLog diameter min. 80 mmLog diameter max. 400 mmhydraulic systemHydraulic oil tank capacity 30 lItem No. 5981031 Lodjvwfzispfx Al Tsru

Condition: new, - new -Description:- Vertical design for splittingshort and meter logs- Robust and solid construction- Impact and scratch-resistant thanks to high-qualitypowder coating- Quick, tool-free splitting height adjustment- Low base plate for easy,{loading of large logs- Phase inverter on all 400 V models- Convenient transportation with manual drawbarthanks to standard chassis with largepneumatic wheels and additional support wheel- Space-saving storage thanks to easylowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical data:Dimensions and weightsLength approx. 1050 mmWidth/depth approx. 1700 mmHeight approx. 2500 mmWeight approx. 282 kgDrivePTO speed 540 min¯¹Device dataSplitting force max. 23.4 tSplitting length min. 560 mmSplitting length max. 1100 mmSplitting material diameter min. 80 mmSplitting material diameter max. 350 mmHydraulic systemTank capacity hydraulic oil 24 . 5981023 Ljdpfx Asvxr Rysl Teru

Condition: new, Holzkraft HSE 5-520 KH log splitter for the convenient and safe splitting of short logs for domestic or semi-professional use. Its compact design and ease of use enable efficient work even in confined spaces. Ideal for preparing firewood. Technical data: Ljdpfxozrx E Hj Al Tsru - Splitting force: 5 tonnes - Length of material to be split: max. 520 mm - Diameter of material to be split: max. 250 mm - Drive: Electric, 230 V - Weight: approx. 50 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return. Lodpjz S Ufbofx Al Tjru

Condition: new, Edge sanding machine KSO 1505 Holzkraft Lrodpevxkv Ujfx Al Tou -Exhibition machine- - Dust extraction port diameter: 100 mm - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm - Connection voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding area length: 1010 mm - Sanding area width: 190 mm - Maximum sanding height: 170 mm - Swivel angle of sanding unit: 0 – 90 ° - Maximum workpiece width: 1010 mm - Maximum workpiece height: 150 mm Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg -1x sanding belt 2750x150mm, grit 80 -1x sanding sleeve Ø38mm, grit 80 -1x sanding sleeve Ø50mm, grit 80 -1x sanding sleeve Ø75mm, grit 80 - New exhibition machine -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Lrjdpfxjcnxa Ne Al Tsu Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, input frequency: 50 Hz, type of input current: three-phase, total length of planing tables: 2,250 mm, overall weight: 695 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, planer shaft diameter: 120 mm, planing height: 240 mm, Equipment: motor brake, Holzkraft jointer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Jointer table length 2,250 mm, 4-knife TERSA planing cutterhead, Motor 7 kW (9.5 hp); S6 5-meter connection cable 2.5 mm² with 16 Ah plug, complete with: simultaneously folding tables, common dust extraction hood for jointer and thickness planer D = 120 mm, thickness table adjustment via handwheel with integrated display, star-delta switch, auxiliary fence, CE and BG certified for wood dust. Order No.: 5503501 immediately available from Seevetal, Ljdpfx Alexn Suae Tjru Ex works, without transport, subject to prior sale.

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Lrodpexnlavefx Al Teu

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Lrodpfszi Nhmjx Al Tju Material feed with two speeds. Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction.

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V Lrsdpjzzci Uofx Al Tou 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device

Condition: excellent (used), Year of construction: 2022, Dust extraction system Manufacturer: Holzkraft Model: ASA 2803 Year of manufacture: 2022 Airflow rate: 2,800 m³/h Lrsdpfx Aloz I R Ivs Tsu Power: 2.2 kW Dust extraction port diameter: 200 mm

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug, 5-pole, and phase inverter Lodpfx Alshkztts Tsru Two swivel casters and two fixed casters with parking brake Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2023, New exhibition machine! List price €11,950 net • Equipped with a TERSA cutterhead for ultra-fast cutter blade changes • The TERSA cutterhead system enables particularly quiet operation • Helically toothed steel feed roller for consistent and uniform material feed • Material feed with two speeds via a separate motor • The particularly long planing tables facilitate easy and precise adjustment of the workpieces • Work tables are made of cast iron, annealed and stress-free, making them durable and permanently flat • Planing tables that open simultaneously towards the rear for short setup times • Planing table adjustment via handwheel with numerical display for planing height • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Material removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helically toothed feed roller (ideal for economical planing of hardwood) • Quality - Made in Europe Equipment details: Tersa cutterhead • No more adjusting and screwing required • Cutter blade changes in seconds • Self-locking • Particularly quiet operation The material feed • Helically toothed steel feed rollers for a consistent and uniform wood feed without leaving marks • Several teeth engage simultaneously for powerful feed • Wear-free compared to rubber feed rollers Fixed dust extraction hood • Thanks to the fixed dust extraction hood, there is no need to change the dust extraction hose when retooling • This saves valuable working time Simultaneous opening of the planing tables • Simultaneous tilting of the planing tables with spring support for quick and convenient adjustment for thickness planing in seconds Thickness table adjustment • FS 41 elite s with thickness table adjustment via handwheel with integrated display • The thickness table is mounted on four large-sized spindles, which ensure maximum stability under all working conditions. • Thanks to the special lifting device, the table position remains perfectly maintained even without locking. Anti-recoil guards • Massive anti-recoil guards prevent workpieces from recoiling • The 4-cutterhead ensures an optimal planing result Anodized aluminum planing fence • Large-sized (1200 x 150 mm) • Easy to move • Adjustable from 90° to 45° via a scale • Supplied as standard with an auxiliary fence for safe planing of even narrow workpieces Technical description - Planer Overall length of the tables 2200 mm - Planer Working width 410 mm - Planer Material removal max. 5 mm - Planer Dimensions of the planing fence 1200 x 150 mm - Thickness Dimensions of the thickness table 775 x 410 mm - Thickness Working height min. 3 mm - Thickness Working height max. 240 mm - Thickness Feed speeds 6 / 12 m/min - Cutterhead speed 5000 1/min - Cutterhead diameter 95 mm - Number of cutter blades 4 pcs. - Electrical connection 400V / 50Hz - Motor power 5.0 kW - Dimensions (L x W) 2250 x 1440 mm - Dust extraction port diameter 1 x 120 mm - Weight 450 kg Ljdjz Ebprspfx Al Toru Storage location: Rieth

Condition: new, Clean air extraction / dust extractor Ljdpfer A Eq Rjx Al Tjru Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Handover: in its current condition as inspected -Accessories: see pictures -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm Lrsdpfx Ajz Rxb Rsl Tsu -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Condition: new, Year of construction: 2026, Holzkraft SCM Format Panel Saw minimax si 4 - 315 / 32 with Scoring Unit Exhibition machine sold at a special price With pivoting saw blade and format sliding table made of anodized aluminum Article number: 5504832VR Solid work table made of heavy-duty, ribbed gray cast iron – for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precise format sliding table made of anodized aluminum – easily movable with high-quality ball bearing system Hard metal guide rails – for long-lasting precision and minimal maintenance Pivoting gray cast iron saw unit with double segment guide – exact zero-point pivoting for maximum cutting accuracy Solid parallel fence with round bar guide Equipped with adjustable eccentric clamping device Integrated miter fence on the sliding table – for quick and precise miter cuts Scoring unit with belt drive TECHNICAL DATA Dimensions and weights Weight (net) approx. 640 kg Connection for dust extraction Dust extraction port diameter 120 mm Dust extraction port diameter saw blade guard 60 mm Installation information Transport width 980 mm Machine body length 1900 mm Machine body width/depth 840 mm Space requirement length 7235 mm Space requirement width/depth 4410 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Output power (motor power) 5.0 kW Rated duty cycle drive motor S6 Duty cycle drive motor 40% Sliding table and table Format sliding table length 3200 mm Format sliding table width 360 mm Format sliding table height 175 mm Table length 940 mm Table width 560 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3200 mm Rip fence length 3200 mm Saw blade tilt 90 - 46° Max. cutting height 90° 100 mm Max. cutting height 45° 71 mm Explanation of max. cutting height: Independent of the scoring unit Diameter of saw blade 315 mm Explanation of diameter of saw blade: Independent of the scoring unit Saw blade speed 4000 min⁻¹ Scoring unit Diameter of scoring saw blade 120 mm Scoring saw blade speed 9000 min⁻¹ EQUIPMENT Equipment Scoring unit: Driven by the main saw blade motor via flat belt, with saw blade Ø 120 mm Anodized aluminum format sliding table ✔ Handle for sliding table ✔ Material roller on the rip fence frame ✔ Saw parallel fence with round bar guide Fences: Two professional folding fences Rip fence shoe ✔ Eccentric clamp ✔ Table extension ✔ Table lengthening ✔ Saw blade guard ✔ Lredpe Afat Aofx Al Tsu Location: in stock, 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2016, Wheel diameter 470 mm Cutting height 265 mm cutting width 390/465 mm Motor output 1,6 kW Table dimensions 535/485 mm Lsdpez Hd Slefx Al Tjru Table tiltable 45 Grad Dimensions (L/W/H) 800/490/2000 mm machine weight ab. 157 kg

Condition: used, Year of construction: 2023, Used Machine Ljdpfx Alozk Ni Te Toru Year of Manufacture: 2023 Condition: Like new; only a few drill holes have been made Features and Technical Specifications: - Spindle speed: 3,000 rpm - Drilling width: 240 mm - Max. drilling depth at 90°: 180 mm - Drill head height adjustment: 160 mm - Tool clamping range: 0–20 mm - Work table rotation: ±60° - Work table length: 565 mm - Work table width: 315 mm - Exhaust port diameter: 90 mm - Output power: 2.2 kW - Supply voltage: 400 V - Power frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: Available shortly Location: Röllbach

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Ledpfx Alehp Rdlj Tjru Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a well-maintained Holzkraft ASA 2403 mobile dust extraction unit. This unit is ideally suited for extracting wood chips and dust in carpentry shops, joineries, as well as hobby and professional workshops. Thanks to its high air flow rate of approximately 2,850 m³/h, the machine ensures reliable extraction at various woodworking machines. The mobile base allows the extraction unit to be used flexibly within the workshop. Ledpfszdtwbjx Al Teru The unit is in used but well-maintained condition and is technically functional. Scope of delivery: Holzkraft ASA 2403 mobile dust extraction unit Base with rollers Filter bag Chip collection bag Magnetic switch Transportation is possible for an additional charge! The machine will be inspected before sale. For used machines with a manufacturing year of 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information is provided without guarantee.

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. Lodpfxscnw T Ie Al Teru The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Year of construction: 2018, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, panel saw -Manufacturer: SCM HOLZKRAFT, Panel saw type minimax SC 2C VRS-08 -Main motor: 4 kW -Pre-scoring motor: 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -max. Cutting height: 90° 100 mm / 45° 79 mm -Miter cut: up to 45° -Cutting width: 920 mm -Table length: -Overall dimensions: 2430/1810/H1030 mm -Weight: 390 kg Ledpfxoz N Hqkj Al Tsru

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard chassis Ljdpfx Alshk S S Eo Tjru Dimensions and weights Chip collection volume: 175 l Nominal outer diameter of suction nozzle inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2.2 m² Noise emission Maximum sound pressure level: 83 dB(A) Volume flow Nominal volume flow: 2200 m³/h For milling, planing, and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality design Easy to move thanks to swivel casters Low power consumption Extraction units comply with dust class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: used, Year of construction: 2009, Used Machine Year of Manufacture: 2009 Features and Technical Specifications: Professional crosscut, rip, and miter saw Motor power: 1.8 kW Power supply: 230 V Blade speed: 4,200 rpm Blade diameter: 255 mm Turntable diameter: 328 mm Maximum cutting capacity: 80 × 305 mm Miter adjustment: up to 45° to the left and right, and up to 60° to the right Saw head tilt: from -45° to 45° Locked positions: 0° / 15° / 22.5° / 31.6° / 45° to the left and right, and 60° to the right Cutting capacity at 45° tilt to the left: 42 × 305 mm Cutting capacity at a 45° tilt to the right: 35 × 305 mm Cutting capacity at a 45° miter to the left: 80 × 204 mm Lredpfezy D Agox Al Tsu Cutting capacity at a 60° miter on the right: 80 × 147 mm Combined cutting capacity on the left: 42 × 204 mm Combined cutting capacity (right): 35 × 147 mm Dimensions L × W × H: approx. 1,200 × 700 × 450 mm Weight: approx. 24.2 kg Base plate and turntable made of die-cast aluminum Pulling function for wide workpieces Laser projection to display the cutting position Workpiece supports that extend on both sides Folding stops for repeated length cuts Adjustable, tall aluminum stops Screw clamp for securing workpieces Adjustable cutting depth limit Fine adjustment of the angle setting Saw blade guard Chip collection bag Easy saw blade change Suitable for cutting ceiling moldings and crown molding