Used Holzkraft Vsa 400 Dc for sale (180)

Condition: new, VSA 2048 L Holzkraft Feeder - Exhibition Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and weights: - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine - Nlodpswfhg Nsfx Ag Dsa

Year of construction: 2025, condition: new, Rollers: 4 Roller width: 60 mm Roller diameter: 120 mm Spring travel: 20 mm Speeds: Variable 3 - 18 m/min. Nlodjg Ez Siepfx Ag Dea Stand: Stand 1050 plus Motor power: 0.75 kW

Year of construction: 2023, condition: new, Rollers: 3 Roll width: 60mm Nlodpelikf Sofx Ag Dea Roll diameter: 120mm Spring travel: 20mm Speeds: 2 / 4 / 5,5 / 6,5 / 11 / 13 / 16,5 / 33m/min Tripod throat: 1050 Motor power: 0,75kW

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Nledpfx Agjxw N N Hs Doa Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Nsdpsxw N Sbefx Ag Dsla Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Feed with uniform speed without loss of strength Metal gearbox with hardened gears Metal cover of the feed rollers Right - and left-hand rotation Powerful motor Durable PU feed rollers Tripod with an extended arm as standard Individual tilt and adjustable for horizontal and vertical use With counter Model VSA 48 L Item No. 5115500 Technical data maximum unloading 1050 mm Number 4 feed rollers Roll diameter 120 mm Roll width 60 mm Travel of the roll 25 mm Nsdpscnxmzsfx Ag Dola 8-speed Circulator Speeds 2 / 4 / 5.5 / 6.7 / 11 / 13 / 16,5 / 33 m / min. Motor output 0,75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: new, Feeder Year of manufacture 2022 max. throat 1050 mm Nljdpfxonvkhzo Ag Dsa Feed rollers 3 pieces roller diameter 120 mm Roll width 60 mm Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2021, Feeder Year of manufacture 2021 max. throat 1050 mm Feed rollers 3 pieces Njdpfx Asnvkh Eog Dsla roller diameter 120 mm Roll width 60 mm Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2021, Feeder Year of construction 2021 max. throat depth 1050 mm Feed rollers 4 pieces Roller diameter 120 mm Roll width 60 mm Spring travel of the rollers 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Nlsdpjtmyq Rjfx Ag Dea Motor power 0.75 kW/400 V Feed: dimensions LxWxH 750x300x570 mm, weight 33 kg Stand: dimensions 1100x320x300 mm, weight 42 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim Nodowhui Ajpfx Ag Djla

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nsdewhui Njpfx Ag Dola Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2021, Exhibition unit Year of manufacture: 2021 Nodpfx Agsw I Uuwo Dsla Dimensions and Weights Length (product): approx. 1700 mm Width/Depth (product): approx. 600 mm Height (product): approx. 2400 mm Weight (net): approx. 69 kg Chip collection volume: 2 x 215 l Nominal outside diameter extraction nozzle (inlet): 260 mm Nominal outside diameter extraction nozzle (outlet): 2 x 100, 2 x 120 mm Electrical Data No-load speed: 2950 rpm Connection voltage: 400 V Mains frequency: 50 Hz Power consumption: 3.8 kW Output power: 3 kW Filter Filter area: 2 x 2.4 m² Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Nominal volumetric flow: 4300 m³/h Max. negative pressure: 2000 Pa SCOPE OF DELIVERY Fine filter bag, two chip collection bags Availability: short-term Storage location: Hochheim

Year of construction: 2025, condition: new, Rollers: 4 Roller width: 60mm Roller diameter: 120mm Suspension travel: 20mm Speeds: 8 Njdjg Ez Sqepfx Ag Dsla Tripod: 1050mm Motor power: 1 / 0.7kW

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical data: Nsdpox Hbrujfx Ag Dola - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Working height min. 3 mm Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Connection voltage 400 V Mains frequency 50 Hz Planer shaft type TERSA 4 planer knives Nsdpfsykaqcex Ag Dela Speed 5000 rpm Maximum planing width 520 mm Feed: Feed speeds 5/8/12/18 m/min Very good condition Available around September 2026 Shipping possible at extra cost!

Condition: reconditioned (used), Motor 5 kW electric height adjustment with digital display brake can be released electrically for knife change Nlodpfoy Hkzfsx Ag Dsa planer cutter shaft 520 mm manual feed speed 5-8-12-18 m/min start and stop buttons at front and rear planer table length 2250 x 540 mm manually adjustable fence with angle function sliding planer shaft guard

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Nlsdjxnlavepfx Ag Dea

Condition: excellent (used), Year of construction: 2022, Holzkraft Raw Air Extraction System Type: ASA 7703 For milling, planing, and saw chips (not suitable for dust) The 180° rotatable extraction unit allows suction guidance from below or above Robust metal impeller Equipped as standard with a high-quality mobility kit for increased stability and easy maneuvering Quick-release fasteners for filter and chip bag Dimensions and Weights: Length (approx.): 1900 mm Width/Depth (approx.): 670 mm Height (approx.): 2800 mm Njdpfxjy Ahpxj Ag Djla Net weight (approx.): 88 kg Chip collection volume: 2 x 290 l Outer diameter of inlet extraction nozzle: 260 mm Outer diameter of outlet extraction nozzles: 3 x 120 mm, 1 x 100 mm Electrical Data: Motor speed: 2950 rpm Connection voltage: 400 V Power supply frequency: 50 Hz Input power: 4.8 kW Output power: 3.8 kW Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal airflow: 7700 m³/h Maximum negative pressure: 2800 Pa Location: Available from stock, 54634 Bitburg - Immediately available -

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Nlsdpfx Aeyn Ny Usg Dja Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Nsdpevmfawjfx Ag Djla Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: excellent (used), model : RLA200 Nledpsv Rnpcjfx Ag Dja

Condition: good (used), Year of construction: 2021, functionality: fully functional, Minimax cu 410es F 26 TERSA Combination Machine * Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with scoring blade installed * Saw assembly with permanently precise dual pivot segment guide * Scoring unit with separate motor and Ø 120 mm blade, easily adjustable from outside * High-precision format sliding table made of anodized aluminum on hardened and crimped steel guide rails * Smooth-running, high-precision anodized aluminum sliding table with proven, permanently smooth-running ball contact system on hardened and crimped steel rails * Large crosscut frame (1200 x 650 mm) with roller and extendable aluminum telescopic fence, up to 3300 mm * Saw unit tiltable from 90° to -45° * Tiltable spindle moulder from 90° to -45° backwards into the moulder fence * Four spindle speeds * Spindle reversible (right/left rotation) * Quick change to thickness planing thanks to parallel-opening planer tables * 2-speed feed on thickness planer table * Helical steel infeed roller for consistent wood feed * Three independent industrial motors * With separate rip fence and separate jointer fence * Main switch lockable * Motor equipped with protective switch * Weight: approx. 1300 kg * Surface Planer Planer table width: 410 mm Planer table length: 2200 mm Max. depth of cut: 5 mm * Extraction Connection Saw blade guard extraction port diameter: 60 mm Number of extraction ports: 3 Extraction port diameter: 120 mm * Thickness Planer Table length: 775 mm Nodpfx Agsyz Sdwj Dela Table width: 410 mm Min. working height: 3 mm Max. working height: 240 mm Max. depth of cut: 5 mm * Electrical Data Number of motors: 3 Main drive motor power: 5 kW Scoring saw motor power: 0.55 kW Voltage: 400 V Mains frequency: 50 Hz * Spindle Moulder Tilting range: 0 – 45° Spindle diameter: 30 mm Usable spindle length: 125 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm * Max. cutter diameter lowered: 240 mm tenoning: 320 mm * Planer Cutterhead Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm * Circular Saw Unit Crosscut capacity: 2600 mm Rip capacity with fence: 1000 mm Max. crosscut width left of blade: 3300 mm Sawblade tilt: 90 – 45° Max. cutting height at 90°: 104 mm Max. cutting height at 45°: 68 mm Max. blade projection at 90°: 118 mm Max. blade projection at 45°: 84 mm (Main) saw blade diameter: 350 mm (Main) saw blade diameter with scorer: see above (Main) saw blade speed: 4200 rpm * Sliding Table and Work Table Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm * Feed Speed range: 6 – 12 m/min Transport available at extra cost.

Year of construction: 2022, condition: used, Used equipment Year of manufacture: 2022 Features and technical data: - Allows a single operator to easily load panels onto the platform frame and swing them from a vertical to a horizontal position - Suitable for use with panel saws, vertical panel saws, rack storage, or for panel transport between workstations - Swivel frame with two-position locking mechanism (vertical and horizontal) - Table height can be adjusted to the desired working level via foot-operated hydraulic pump - The design with a smooth scissor-lift mechanism ensures the platform is raised and lowered in a perfectly parallel manner - Sturdy roller supports on the lower rail and multiple all-direction rollers for ergonomic and easy handling - Counterweight on the lower frame provides secure positioning and maximum stability when moving the table - Operator pedal for the workstation table is easily accessible at all times - Easy to maneuver thanks to four swivel castors with a diameter of 125 mm Nlodpfsyy Tp Sox Ag Dja - Two castors equipped with parking brakes - Swivel frame can be mounted and dismounted on the platform base frame quickly and easily - Complies with EN 1570-1 safety standards - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm | Length: 1500 mm - Roller diameter: 125 mm - Dimensions: 1200 x 740 x 400 mm - Weight: approx. 80 kg - Swivel frame weight: 10 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2026, functionality: fully functional, CNC Milling Machine startech cn k with Store Equipment BRAND NEW MACHINE Compact 3-axis machining center for milling and engraving, suitable for tool diameters up to max. 60 mm with shank diameters up to max. 16 mm. Spindle drive via a powerful 2.4 kW motor. Intuitive, user-friendly machine software for PC included, featuring an open interface compatible with various CAD/CAM programs. Technical Data: - Work table: 760 x 1170 mm - Spindle speed: 24,000 rpm - Maximum workpiece dimensions X: 915 mm - Maximum workpiece dimensions Y: 610 mm - Maximum workpiece dimensions Z: 176 mm - Number of drilling spindles: 1 - Maximum tool diameter: 60 mm - Maximum travel speed X-axis: 5 m/min - Maximum travel speed Y-axis: 5 m/min - Maximum travel speed Z-axis: 2.5 m/min - Suction connection nominal diameter (external): 40 mm Includes: - 5 pneumatic suction cups For positioning on the work table Simple workpiece clamping - Pneumatic working pressure: 6.5 bar - Compressed air requirement: 120 l/min Incl. wetCAT 141 RS-TOOL M-Class Wet & Dry Vacuum Cleaner by CLEANCRAFT - For extraction of dust from, e.g., hardwood, plaster, paint, concrete - Automatic filter cleaning - Air volume: 4560 l/min - Dust class: M - Container capacity: 41 l - Hose diameter: 33 mm - Sound pressure level: 74 dB(A) - Power input: 1.1 kW - Max. device socket connection: 2.4 kW - Connection voltage: 220 – 240 V - Mains frequency: 50 / 60 Hz Njdoyx Dzvjpfx Ag Djla List price (RRP): €14,789.00 Available at short notice Shipping available at additional cost

Condition: new, Year of construction: 2026, functionality: fully functional, Edge sanding machine KSO 150 F PRO NEW Note: The milling table has minor scratches on the tabletop Scope of delivery: Sanding belt K 100, 5 x rubber rollers ø25, ø30, ø40, ø45, ø50 mm, 6 x sanding sleeves K80 ø25, ø30, ø35, ø40, ø45, ø50 mm, Tool kit, Mitre fence Sanding unit pivotable via hand crank, Machine stand made of welded steel, Oscillating sanding belt with separate gear motor, Oscillation can be switched on or off as required, Sanding pad with graphite coating, Height-adjustable sanding table, Auxiliary table with extraction ports, Sanding sleeve setup with attached work table, Adjustable stops 2 pcs extraction ports ø100 mm, Work table size: 950 x 450 mm, height adjustment 110 mm, 400 V, motor power 2.2 kW, oscillation motor 0.11 kW, Sanding belt length 2640 mm, width 150 mm, Belt speed 14 m/s, Sanding surface length 800 mm, width 150 mm, Nlsdpjyxqtfefx Ag Dja Oscillation stroke 15 mm, Sanding unit swivel range 0-45° Machine dimensions 1750 x 1050 x 1200 mm, Weight 310 kg RRP (list price) €11,050 Available at short notice Transport possible at extra charge!