Used Holzkraft Rla 160 for sale (227)

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg Neljcnw T Ijhccqrjcr

Condition: new, Year of construction: 2021, New machine Year of construction 2021 for wood dust and chips Designed for commercial use Motor 2.2 Kw IE 3 Speed 2874 rpm. Suction nozzle 160 mm Filter area 9.21 m² Pneumatic filter cleaning Sound pressure level 73 dB(A) Nominal volume flow 1448 m³/h Negative pressure 2247 pa Chip collection volume 2x165 l LxWxH 1755x830x1654 mm Nelhccoqrw Ereqrocr Weight approx. 274 kg Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Njlshkzttohccqrscr Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) Ncslor A Eq Rohccqrsr L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 2018, Used machine Year of construction 2018 Ncolhccju Dcxioqrjr RLA 125 clean air extraction systems for wood chips and wood dust. Designed for commercial use. Made in Germany. All clean air extraction systems in this series are dust-testedHigh extraction performance with low space requirements Maximum performance in this class Quality made in Germany Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for multiple dust sources Description of the filter Ultra compact with maximum filter surface area Filter material made of polyester fleece, aluminized, washable and therefore with a long service life Filter tested and approved as standard in antistatic design in accordance with category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter High-quality, sophisticated design for professional use Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily converted from left to right, making it flexible to use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Optimum chip distribution in the chip containers due to large filter surface System already fully assembled on delivery, so can be used quickly All models are mobile Low space requirement due to compact design Very quiet Scope of delivery: Basic equipment RLA 125 Connection cable 5 m with CEE plug, 5-pin, 16 A and phase inverter Four plastic castors with a diameter of 125 mm (two steerable, one with lock) Manual cleaning Availability: short term Storage location: Baden-Württemberg

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 210PM2219030008, type of input current: three-phase, filter area: 22 m², total height: 1,800 mm, total width: 830 mm, total length: 1,717 mm, overall weight: 290 kg, nominal flow rate: 2,262 m³/h, input voltage: 400 V, extraction nozzle diameter: 200 mm, noise level: 72 dB, frequency: 50 Hz, power: 3 kW (4.08 HP), tank capacity: 2,165 l, Used system with slight damage/scratches on the machine housing. There is still some fine dust in the machine. Serial number: 210PM2219030008 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Ncslevu Dcyohccqror Suitable for extracting and separating dry wood and plastic chips High extraction performance with little space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, making it flexible to use Large inspection openings Large-sized, mobile chip containers with clamps and chip collection bag Dust extractor already fully assembled when delivered, making it quick to use All models mobile For model RLA 210: Optimal chip distribution in the chip containers due to large Filter area Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, thus with a long service life Filter tested and approved as standard in antistatic design according to category M-BIA The fan is connected downstream of the filter Unit of measurement: piece Packaging unit: 1 Metal fan wheel Inspection opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Pre-equipped for connection of machine detection for up to 8 machines and slide controls Machine detection via potential-free contact Pneumatic cleaning (compressed air connection via standard plug, working pressure 4 - 6 bar)

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Nolhcjv Sk Tmocqrocr Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: excellent (used), model : RLA200 Ncelhcsv Rnpcocqror

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 2433345525, Suction nozzle 125 mm Nominal volume flow 884 m³/h motor power 2,2 kW 16A mobile Nslhcoiw D U Necqrocr weight approx. 194 kg LxWxH: 1000 x 840 x 1650 mm tank size 730 x 660 mm manual shaking

Condition: excellent (used), Year of construction: 2015, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, intake manifold diameter: 125 mm, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, noise level: 71 dB, nominal power: 2.2 kW (2.99 HP), inlet: 125 mm, power: 2.2 kW (2.99 HP), Container volume 165 liters Ncjlhcouhmqbscqrjr

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag Njlhccscnw U Doqrecr unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, Holzkraft Extractor RLA 210 For wood dust and shavings, designed for commercial use Item number: 5132100 Brand: Holzkraft Dimensions and weights Shavings collection volume: 2 x 165 l Nominal diameter of the external suction nozzle inlet: 200 mm Length: approx. 1755 mm Width/depth: approx. 830 mm Height: approx. 1800 mm Weight: approx. 259 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise emission Sound pressure level: max. 72 dB(A) Voltage flow: Nominal flow rate: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with low noise Space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Ncslhcohk Dfrjcqror Large, mobile chip containers with clamps and chip collection bag Dust extractor is delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece, washable and therefore with a long service life Filter is tested and approved as standard in an antistatic version according to category M-BIA Filter resistance monitoring via differential pressure cell, adjustable with a warning light on the unit Control box The fan is installed downstream of the filter. Equipment details With a new locking device for secure container positioning. Location: From stock, 54634 Bitburg - Available at short notice.

Condition: new, VSA 2048 L Holzkraft Feeder Nelhccqewfhg Norscr - Exhibition Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and weights: - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Nolhccqjwfcqierocr Machine width: 900 mm Machine height: 2000 mm

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION21 drilling spindles with quick-action clamping system, five quick-action chucks included in delivery Solid steel work table, five quick-action chucks included Patented system for quick and easy adjustment of drilling depth via spiral disk Pneumatic drill head swivel, for drilling in any position between 0° and 90 Foldable side stops made of cast iron with round bar guide Side stops can be easily adjusted by means of a magnifying glass on the millimeter scale Height adjustment of the drilling head via counter Two positionable pneumatic clamping cylinders Thanks to 640 mm center distance, machining of 2 workpieces with a width of 316 mm each is also possible SUPPLYTwo pneumatic pressure cylinders Five quick-action chucks Two stop rulers, each 1.5 m long Four folding stops for the fence rulers One setting gauge for fine adjustment of the folding stops on the fence rulers TECHNICAL DATA Dimensions and weights Working table length 885mm Working table width e332mm length (product) ca.1015mm width/depth (product) ca.990mm Height (product) ca.1270mm Weight (net) ca.260kg Electrical data Input power1,5kW Output power1,1kW Ncslhcekwhldscqrer Rated operation mode drive motorS3 Supply voltage400V Mains frequency50Hz Noise emission Sound pressure level78,3dB(A) Pneumatic connection Working pressure6 8bar Spindle Max. Drilling width 640mm Max. drilling depth at 90°65mm Number of spindles21 Spindle distance32mm Spindle distance first to last640mm Spindle distance sufficient forTwo workpieces each 316mm wide Spindle speed(s)2800min?¹ Swivel of drilling unit0 90°. Max. workpiece height130mm Suction Suction nozzle diameter 80mm Incl. special accessories: 2 pcs. Additional pneumatic pressure cylinder for MDB 21/23/29 PRO 17 pcs. quick-action chuck for MDB 21/23/29 PRO 1 pc. Setting gauge for backgauge distance for MDB 21/23/29 PRO 1 pc. Reference bolt for row bore for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

Condition: excellent (used), Planer-thicknesser HOLZKRAFT FS30c -used- TERSA planer shaft, table opening to the rear, helical toothed infeed roller, noise insulated, dust-tested ----- Technical data ----- Planing width: 300 mm, table length: 1,500 mm, Ncjlhsu R S T Asccqrjr max. chip removal: 3 mm, Planer shaft diameter: 72 mm, Number of knives: 3 pieces, Swivel range of planing fence: 45 °, clearance height: 230 mm, min. Workpiece thickness: 3 mm, min. Workpiece length: 300 mm, suction nozzle: 120 mm, weight: 264 kg Quality info: - Dressing tables adjusted - Infeed and outfeed rollers checked and adjusted - Table guides checked - Complete basic inspection - Complete basic cleaning - electrics checked - ready for immediate use

Condition: new, Year of construction: 2021, New machine Nslhcjkwhdljcqrscr Year of manufacture 2021 Dimensions and weights Length ca.1725 mm width/depth ca.880 mm Weight ca.270 kg Dressing Chip removal max.4 mm Connection suction Suction port diameter thickness2 x 120 mm Thickness Working height min.3 mm Working height max.230 mm Chip removal max.4 mm Electrical data Power drive motor4 kW Supply voltage400 V Mains frequency50 Hz Planing cutterhead TypeTERSA Number of planing knives3 pcs Speed5200 min¯¹ Planing width max.300 mm Feed rate Speed7 m/min Availability: short term Storage location. Hochheim

Condition: new, Table router HOLZKRAFT t 45c LL With table extension right and left, and extendable workpiece support ----- Technical data ----- Table size: 1,945 x 695 mm, max. spindle projection over table: 130 mm, Useful length of milling spindle: 100 mm, Nolhccqou U Rfperjcr max. retractable milling cutter Ø: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, suction nozzle Ø: 2 x 120 mm - Special offer price - - new exhibition machine -

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Length approx.: 2300 mm Width/depth approx.: 1100 mm Weight approx.: 980 kg Total length of the tables: 2300 mm Feed table length: 1200 mm Working height: 930 mm Max. chip removal: 6 mm Fence length: 1200 mm Fence height: 190 mm Swivel range of dressing fence: 90 - 45 ° Suction nozzle diameter thickness: 120 mm Main motor: 7 kW Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Max. working height: 250 mm Max. chip removal: 8 mm Supply voltage: 400 V Phase(s): 3 Ph Type of current: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planing knives: 4 pcs Speed: 5000 min¯¹ Planing width max.: 520 mm Speed: 5/8/12/18 m/min Availability: short term Njlhccqorq N Easrecr Storage location: Solingen

Condition: new, Edge sanding machine KSO 150 M F 3 PRO Holzkraft Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Drive power: - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm - Worktable width: 280 mm - Table tilt: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm - Sanding belt width: 150 mm Ncolheu R S Dzjccqrjr - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. - new exhibition machine -

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 For large cutting lengths e.g. in kitchen construction or for floorboards Small footprint and versatile Quick changeover between double miter cuts or cutting to length Robust swivel arm made of cast iron with exchangeable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit can be swiveled 45 degrees on both sides Motor with mechanical brake Aluminium fence as standard Roller conveyors with one meter length for both sides available as accessories Technical data x Dimensions and weights length approx. 2110 mm width/depth approx. 1580 mm Height approx. 1500 mm Weight (net) approx. 300 kg Connection suction: Suction nozzle-Ø saw blade guard 60 mm Electrical data: Supply voltage 400 V Mains frequency 50 Hz Power drive motor 4 kW Sliding carriage and table: Table length 2060 mm Table width 1320 mm Noise emission Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular saw unit saw blade tilt -45° 45° Swivel angle saw arm -45° 45° Max. Cutting height 45° 570 x 120 mm Njlhccqokwhm Rsrecr Max. Cutting height -45° 470 x 120 mm Max. Cross section 900 x 20 / 855 x 80 mm Max. Cutting height 0°/45° 120 / 83 mm Diameter saw blade 400 mm Diameter saw blade bore 30 mm Speed saw blade 2800 min¯¹ Location: Solingen Availability: n. Absprache

Condition: new, Minimax ME 35 TR S Holzkraft Edge Banding Machine -Exhibition Machine- This offer is an equipment package. Nslhccsv Nhhpjqrocr The following items and options are already included in the price: - New exhibition machine -

Condition: used, Year of construction: 2019, Used raw air extraction unit Year of construction 2019 Nominal capacity 2789 m³/h Filter area 1.8 m² max. negative pressure 1668 pa Chip collection volume 160 l Motor 1.1 kW 400 V Ncjlhcjtr Hfpscqrsr Extraction nozzle 1 x 120 mm, 1 x 100 mm Availability: short term Storage location: Solingen

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Nolhcov Nhg Sjcqrjcr Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Nslhccevxkv Usqrocr Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -