Used Holzkraft Minimax Si 400Es 32 M A for sale (199)

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V Holhjx Hbruocdwvjnh - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Condition: new, Holzkraft minimax si 400es 32 sliding table saw 5504754 In heavy-duty professional design with scoring unit and format sliding carriage made of anodized aluminum. Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guide tracks Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment option UP version: swivelling control panel at eye level Made in Italy TECHNICAL DATA: Dimensions and weights Weight (net) approx. 715kg Suction connection Suction port diameter 120mm Suction port diameter saw blade guard 80mm Installation information Transport width990mm Machine body length 1900mm Machine body width/depth 885mm Required space length 7180mm Space requirement width/depth 4860mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given to the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power scoring motor 0,55kW Power drive motor 7,0kW Rated operating mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table Hnolhcdjkkrm Rowvjh Length of sliding table 3200mm Format sliding carriage width 360mm Format sliding carriage height 142mm Table length 940mm Table width 560mm table height 900mm Circular saw unit Cutting width with rip fence 1270mm Max. Trimming width left of saw blade 3260mm Trimming length 3200mm Saw blade inclination 90 - 45 Max. Cutting height 90°136,5mm Max. cutting height Cutting height 45°97mm Explanation max. cutting height Independent of scoring saw blade diameter 400mm Explanation Diameter of saw blade Independent of scoring unit Speed of saw blade 4000min¯¹ Scoring unit Diameter of scoring saw blade 120mm Speed of scoring saw blade 9200min¯¹ Holzkraft dealer - accessories available on request!

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Hneloxw N N Hjhcdwvjh Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Hnslhcdjd Hx Hmswvoh Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Hnjlhcjvyuqfsdwvoh

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Hnslhcdevwga Howvoh

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Hanging operator panel with Siemens control system and large 10" touchscreen display Control of saw blade height/tilt and positioning of the rip fence via the operator panel Maximum cutting height: 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High inherent weight ensures vibration-free operation Large outrigger table with material roller Extendable aluminum longitudinal fence with two folding stops and digital position indicator 7.5 kW powerful main motor mounted on a robust cast-iron frame Quadruple ball-bearing sliding table made of anodized aluminum for high torsional rigidity Multiple locking positions on the sliding table Standard with table width and table length extension made of heavy-duty sheet metal Large pendulum blade guard can be conveniently raised using a gas pressure spring Tool-free saw blade clamping with Rapid-System Hnolhow I Utgocdwvsh Location: Hochheim Availability: short term

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Hnslhcdwovmfawovoh Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Holhcevwflbjdwvsnh

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Hslhsvwf Ucscdwvonh

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Hnjlhjvwd U Iocdwvjh

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Holhjvwfqwocdwvonh

Condition: new, - New -Description:TERSA quick-change system for changing planer knives in secondsFour-blade shaft for best planing resultsSmooth running thanks to precision unit and heavy cast iron designLong planing tables for precise planingRobust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flatLarge, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°With auxiliary fence as standardPowerful 5.0 kW industrial motorSturdy cast steel constructionSlot drilling device can be retrofittedLength (product) approx. 2250 mmWidth/depth (product) approx. 1370mmWeight (net) approx. 465kgJointerTotal length of the tables 2250mmMax. chip removal 8mmDressing fence length 1200mmDressing fence height 160mmSuction connectionSuction nozzle diameter 120mmInstallation informationSpace requirement length 2250mmSpace requirement width/depth 1440mmExplanation of space requirementWorking area length 1000mmWorking area width/depth 3500mmChip removal max. thickness 8mmElectrical dataPower drive motor 5kWSupply voltage 400VMains frequency 50HzItem no. 5503521 Hslhcdwsvwf Hrovjnh

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Hjlhcdwsvwf Ensvjnh

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Hnelhovwfmlscdwvjh

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Hjlhcdshkz E Tswvenh Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: as good as new (ex-display), Year of construction: 2025, Planer Thicknesser with TERSA Planer blade quick change system. With TERSA quick-change system for fast planing blade replacement TERSA Planer blade system allows for especially quiet running Diagonally serrated steel feed roller for constant and uniform material feed Robust dressing tables made of ribbed grey cast iron, milled and stress-free, this resistant and durable plan Large, pivoting dressing stop for precise alignment, 90 ° / 45 °, with quick clamping Back opening dressing table Powerful motor Robust steel / cast iron construction Milling can be retrofitted Hnslhcdwodqy Uqjvoh Equipment details TERSA Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Perfect plane results Surface Planer Fitted as standard with the TERSA Planer blade quick change system Large dressing tables The dressing and fixed width tables made of grey greeting guarantee highest quietness and vibration-free. Thickness Planer With the powerful thickness feed, workpieces can be planed up to 200 mm height. The helical feed roller guarantees the constant feeding. The conversion of Abrichtzu thickness Planer is in seconds with one hand. Drive Stable-focused chain drive Steel drive wheels Massive cast iron pillow block Planing mill Massive arrestors prevent kickback of workpiece

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Feed rate Hnslhcdeih Dxdjwveh speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Hjlhcdwsff Hdpevjnh Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Hsljff Hdmshcdwvonh Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: new, Year of construction: 2026, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Hslohp Rdlohcdwvonh Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood Included as standard Helhcdshp Rcrowvjnh Reversible fence jaws versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-way HOLZKRAFT CU 410c F 26 N Tersa -- Technical data -- - Circular saw - circumference 2.600 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 100 / 79 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 900 mm saw blade tilt 90° -45° - Dressing - Helhcdsd Dtc Tswvsnh working width 410 mm planing table length 1.660 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 410 x 605 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool Ø 210 mm spindle speed 3.500 / 6.000 / 10.000 rpm spindle Ø 30 mm - General - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Helhcodqzh Tjdwvsnh Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt Holhcdwed Hx Hnjvsnh The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four großdimensonierten screws ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Thickness table adjustment at 41 S elite s through a Handwheel with numeric display for the planing height (exactly 1/10 mm) Dimensions and weights Length approx. 900 mm Width/height 1070 mm Weight approx. 361 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 5 main motor kW Installation information Space length 1070 mm Space width/depth 900 mm Space height 1100 mm