Used Hyundai Forklift for sale (171)

Condition: used, Year of construction: 2018, operating hours: 2,578 h, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must always be agreed upon in advance. Hyundai HX 145 LCR Hjdpfx Afexhbkweponu - Crawler excavator - Crawler drive - Rubber tracks - Incl. tilting bucket - Radio - Operating hours: 2,578 - Engine: 129 kW - Camera - Central lubrication system Errors and interim sale excepted. Internal vehicle number: W67 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must always be agreed upon in advance.

Year of construction: 1999, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 2 Turret Tool taper vdi 400 This Hyundai HIT 20 M was manufactured in 1999. It's a horizontal turning machine featuring a VDI400 tooling interface. Consider the opportunity to buy this Hyundai HIT 20 M horizontal turning machine. Contact us for more information. Application Types Hsdpfx Afsxgkctoponu Turning

Condition: used, Year of construction: 2012, operating hours: 5,925 h, Serial number: hhih0604cc000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20243 Specifications: - 2012 model - 5925 Hours - 24060 kg - 107 kW - Machine width: 310 cm - Track width: 70 cm - Track controls - Rear hatch does not lock Hodpfjxdux Tjx Afpjnu - Chassis should be replaced - Loose track plates - Gps - Excavator bucket - Hydraulic cleaning bucket can be included for an additional charge - Lights - Radio - Air conditioning/ac - Ready to deliver Description: We have a 2012 Hyundai Robex 235LCR-9 w/ Excavator bucket and gps for sale. The chassis should be replaced and the side hatch does not lock. Other than that, the machine works as it should according to the owner. But some additional costs must be considered. A hydraulic cleaning bucket can also be included for an additional charge. Ready to deliver Hours: 5925 Own weight: 24060 Total Weight: 24060 Width: 310 Kw: 107 Model: Robex 235LCR-9

Condition: new, feed pressure 8 bar Effective free air delivery 125/85 L/min Hnsdpfx Afeu Imhispsu Receiver capacity 24 / 8 l / bar weight of the machine ca. 22,5 kg. Number of cylinders 2 Stk. motor 230V / 0,75KW V / KW range L-W-H 600 x 310 x 510 mm Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: ready for operation (used), power: 99.29 kW (135.00 HP), Year of construction: 2008, Vehicle description Wheel loader HYUNDAI HL740-7 Year of manufacture 2008 according to counter 15,752 hours approx. 12 tons 135 HP - incl. high-tipping bucket - Volvo quick coupler (without hydraulic cylinder) - additional circuit up to fork carriage - cabin with heating and air conditioning Hnjdpfx Afjv Eap Depou - original paint Sales price: 23,900.00 net Cheap delivery also possible! New pallet fork in stock for an additional payment!

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6-030, turning diameter over cross slide: 254 mm, turning length: 500 mm, spindle bore: 70 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 510 mm, overall weight: 4,300 kg, - Year of manufacture: 1996 - First commissioning: 1998 - Single owner, used in our own operation - Fully functional, powered and ready for demonstration - X-axis travel: 180 mm - Z-axis travel: 510 mm - Turning diameter: 254 mm Hjdpfx Afoxgtvcjponu - Turning length: 500 mm - Spindle speed: 3,600 rpm - Spindle bore: 70 mm - Spindle motor power: 15 kW - Control: Siemens 840 C - Chip conveyor - 8-position turret - 3-jaw chuck with hollow clamping cylinder - Fully automatic tool presetter - Dimensions: 2,600 x 1,650 x 1,830 mm – 4,300 kg Net price ex-works Luckenwalde (Germany), excluding transport

Condition: new, Year of construction: 2023, ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Pickup dates must be arranged in advance without exception. Hyundai HL 970A XT 4x4 with bucket - Including bucket - Radio - Operating hours: 10 hrs - LED work lights - Transport width: 2.97 m - Engine power: 242 kW - Displacement: 8.9 L Hnsdpfx Afsxhbkdopju Errors and prior sale excepted. Internal vehicle number: W37

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,619 h, General Data Machine weight 10000 Control Unit Brand FANUC Model 21i MB Main Drive Spindle speed range 80 - 12000 Spindle motor power 11/7.5 kW Tool taper NT 40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 42 m/min Hedpfx Asxizg Uefpsnu Y-Axis Movement 600 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 2 x 900 mm Outer width 2 x 650 mm Min distance between vertical spindle and table 200 mm Max distance between vertical spindle and table 800 mm Table load 2 x 400 kg Tools Max weight 8 kg Max tool diameter 90 mm Max tool length 300 mm This 3-axis Hyundai Kia Hi-V600D vertical machining center was manufactured in 2011. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia Hi-V600D machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 320 mm, spindle bore: 80 mm, bar diameter (max.): 70 mm, Complete with accessories as shown in the photo Hjdpfx Afoxhdvpsponu

Condition: new, rated capacity 2,6/2,8 KW frequency 50 Hz output voltage 2 x 230AC / 1 x 12DC V tank capacity 15 l weight of the machine ca. 48 Kg dimensions of the machine ca. 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet; only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded Hedsu Imnvjpfx Afpenu

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Hodpfx Afoxdxhropjnu Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, Hyundai WIA KF 5600C Machining Center (LIKE NEW) Hyundai WIA KF5600 C Commissioned: 2019 Table: 1250 x 560 mm 12,000 rpm X/Y/Z travels: 1100 x 560 x 635 mm 10.4” display Random magazine for 30 tools Hnsdpfx Afsxf Ey Djpsu Internal coolant at 30 bar Chip conveyor Renishaw TS 27R probe PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance. Hyundai HX 235A LCR - New vehicle - Crawler excavator - Crawler drive - Without attachments - Radio - Operating hours: 18 - Engine: 129 kW - Camera - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W61 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Hnodpfoxhbitex Afpsu Collection dates must be agreed upon in advance.

Year of construction: 2021, condition: new, Field of application: Construction Attachment suited for: Loaders Bucket volume: 6.5 m^3 We manufacture high dump bucket sets for all brands-models. Hjdpfx Afjpa Rnwepsnu The bucket in the photo is made for the Hyundai HL760. The capacity of bucket is 6,5m^3 For detailed information please contact us.

Condition: used, Year of construction: 2022, operating hours: 3,179 h, 2022 | Hyundai HX520AL | Used Tracked Excavator | 3179 hours 📍Location: Germany, Böblingen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 183000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 62 approved ✅ 5 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Young but well-used machine, has worked with the hammer for a long time, play in the slewing ring and bucket cylinder, mechanically and optically in order, SOLD WITHOUT HAMMER. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39198 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Hsdsxfm Enspfx Afponu ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, rated capacity 3,0 KW rated current 16/8,3 Ampere output voltage 2 x 230AC / 1 x 12DC V tank capacity 12 l engine output 7,0 PS Hnedpfx Aeu Imf Uefpou weight of the machine ca. 45 Kg dimensions of the machine ca. 0,68 x 0,58 x 0,54 m Exhibition machine!! The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine)

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Hsdpjxda H Nofx Afpenu Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, machine/vehicle number: 70TY5064, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,600 mm, total length: 1,640 mm, total width: 2,349 mm, table width: 380 mm, table length: 380 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 14, The Hyundai SPT-V30TD is a compact 3-axis vertical machining center designed for high-speed drilling, tapping, and light milling applications, typically found in precision component manufacturing environments. The machine features a robust structure and is equipped with a Yasnac CNC control—known for reliability and effective motion control. Hsdpoxgdluofx Afpsnu Main Specifications: Travel: X: 500 mm, Y: 300 mm, Z: 300 mm Spindle Speed: Up to 8000 RPM, with BT30 (ISO 30) spindle taper Table Size: 600 mm x 380 mm Max Table Load: 200 kg ATC: 14 tool capacity, carousel type Control: Yasnac J50M Machine Dimensions (L x W x H): 1640 x 2349 x 2600 mm Weight: Approx. 3500 kg Notable Features: Rapid traverse rates (X, Y, Z): up to 30 m/min Dual table/pallet changer is sometimes featured, increasing productivity Compact footprint designed for efficient shop floor space use Suitable for drilling up to 20 mm, tapping up to M16, and various milling operations Machine need to be fixed. It shows fault 310: Servo Off.

Condition: used, Year of construction: 2016, operating hours: 1,985 h, PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HL 970 4x4 Hnedexhbigspfx Afpju - Incl. bucket - Tyres: 26.5 R25 - Radio - Operating hours: 1,985 - Reversing camera - Air conditioning - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W50 PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.

Year of construction: 2022, condition: new, Attachment suited for: Construction machines GALEN Demolition grapples with 360° rotation system is a kind of excavator attachments that are used for demolishing, material handling, and sorting of all kinds of materials such as rocks, scrap, and other debris. The machine model on the photo of grapple and mechanical quick coupler is Hyundai HX220L For inquiries and detailed information, please contact us Hnodpfxeph Rmrj Afpou

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Hnsdpfsxda H Aex Afpou Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, Year of construction: 2022, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance. Hyundai HX 145A - New vehicle - Crawler excavator - Track drive - Rubber tracks - Without attachments - Radio - Operating hours: 16.9 - Engine 100 kW - Camera - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W63 Hnjdpfx Afsxhbiaopsu ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: new, Year of construction: 2023, Hyundai R140 General Purpose Bucket Hedop I E U Ujpfx Afponu

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HX 220AL - New vehicle - Crawler excavator - Track drive - Without attachments - Radio - Operating hours: 15.7 - Engine: 129 kW - Camera - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W64 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hnodsxhbhvopfx Afpju

Condition: new, Year of construction: 2024, Machine: Hyundai HX225 Edge Length: 1200mm Hedpfx Afsr Ar Anjponu Capacity: 1.2m^3 For detailed information and inquiries please contact us. Galen Group produces buckets for 20years