Used Liebherr Mobile Excavator for sale (252)

Condition: used, fuel type: diesel, Year of construction: 2014, operating hours: 9,535 h, Year of manufacture: 2014 Drive: Wheel CE mark: yes General condition: average Technical condition: good Visual appearance: average Gsdpfxox Dzdve Aa Isil Serial number: 074209 Please contact Ferdinand Pater for more information Soon available, Liebherr LH30

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules - Viscous damper The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: Giodex Huxuepfx Aa Ijl -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.

Condition: used, mileage: 88,100 km, first registration: 04/2005, fuel type: diesel, tire size: 445/95 R 25, axle configuration: 4x4, fuel: diesel, brakes: retarder, suspension: hydraulics, Year of construction: 2005, Equipment: ABS, crane, retarder, = Additional options and accessories = - Mechanical tachograph - Hub reduction - Radio/CD player = Further information = Godpfx Aaex Dc Eho Ioil Tyre size: 445/95 R 25 Suspension: hydraulic suspension Front axle: Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle: Tyre tread left: 60%; Tyre tread right: 60% Unladen weight: 23,999 kg Payload: 1 kg Gross vehicle weight: 24,000 kg Damage: none

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: 076646 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Upper engine: Perkins Counterweight: 0 Giedetr Nuqepfx Aa Ijl Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), power: 200 kW (271.92 HP), operation weight: 27,500 kg, Year of construction: 2009, operating hours: 11,796 h, Equipment: air conditioning, Liebherr L576 Year: 2009 Operation hours: 11.796 Hrs ROPS Gsdpfx Ajxnmz Isa Isil Airco back drive camera tyres: 26.5R25 approx 60-70% good bucket with edge engine with 200kW CE / EPA operation weight: 27.5to.

Condition: good (used), Year 2003 Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Vertical machining with straight shaping head and synchronization Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Control Liebherr PC-NC Gedpfx Ajt Utdpoa Isil For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, Year of construction: 2021, * Bucket 10 m³ * Year of manufacture: 2021 * More photos and videos available via Whatsapp * Information provided without guarantee; intermediate sale reserved. Gisdex Dqndopfx Aa Ijl

Condition: used, functionality: fully functional, machine/vehicle number: 81.606.587.3, This is a Plus refrigerator from the ProfiPremiumLine GKPv 6570 series by premium manufacturer Liebherr, production year 20. With a gross capacity of 597 litres, it offers space for 2/1 GN containers or stackable E2 crates. The rounded stainless steel GN tray supports make cleaning significantly easier. The dynamic cooling system ensures rapid cooling of goods to the desired temperature, adjustable between -2°C and +15°C. Thanks to the powerful refrigeration unit and the professional-grade electronics, consistent cooling is ensured even with ambient temperatures of up to +43°C. Defrosting is automatic but can also be initiated manually. The unit has been inspected in our in-house workshop and is fully operational. You will receive an invoice with VAT shown separately. Condition: Used, tested and fully functional Technical Data: • Dimensions (W x D x H): 700 x 830 x 2120 mm (external) • Dimensions (W x D x H): 510 x 650 x 1550 mm (internal) • Type: GKPv 6570 Index 40B /001 • Serial number: 81.606.587.3 • Power supply: V: 230 / A: 2.0 / W: 250 / Hz: 50 • Capacity: 597 litres (gross volume) Gisdpfxsxz Tgdo Aa Ijl • Refrigerant: R 290a • Weight: 129 kg • Year of manufacture: For further details, please refer to the attached image of the type plate. Additional Features: • Height-adjustable feet: Where daily hygiene plays a key role, the height-adjustable feet provide sufficient ground clearance, ensuring that cleaning even beneath the unit is easy and convenient. • Temperature alarm: The integrated temperature alarm provides both audio and visual alerts should the preset temperature thresholds be exceeded or not met, ensuring maximum safety for your stored goods. • SwingLine: The elegant SwingLine design with lateral light strips makes these units the first choice for those with the highest design standards. The gracefully curved design of Liebherr units makes them a visual highlight in professional environments. SwingLine doors feature a full-length integrated handle profile, making them ergonomic, easy to open, and particularly simple to clean. Shipping: • Delivery or customer collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by prior arrangement

Condition: used, power: 150 kW (203.94 HP), fuel type: diesel, Year of construction: 2010, operating hours: 10,871 h, Equipment: cabin, steel tracks, LIEBHERR PR734 XL year 2010, hours 10871, weight kg 23500, kw 150 Gsdei Uy Dcspfx Aa Ieil

Condition: used, color: other, Year of construction: 2020, Serial number: 58157 Machines for Sale! Gisdsxxxhujpfx Aa Ijl Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime.  All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 10,600 h, * 10,600 operating hours Gsdsxzcttjpfx Aa Ijil * Operating weight: 8,350 kg * Hydraulic quick coupler * Bucket and pallet forks * Maximum speed: 30 km/h * Immediately ready for operation

Condition: used, Year of construction: 1998, operating hours: 13,258 h, 1998 | Liebherr L 522 with High-Tipping Bucket | Used Wheel Loader | 13258 hours 📍Location: Germany, Stuttgart 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Wheel loader Liebherr L522 with high dump bucket. the condition of the machine corresponds to the value of the operating hours. leakage hydraulic oil on one of the two chassis motors. at the time of inspection, the machine ran / functioned without any other abnormalities. the machine shows wear on bolts and bushings corresponding to the age and mileage and the purpose of use, as well as signs of use (dents, abrasions, etc.) and corrosion. the machine has not been tested under load. well maintained and serviced machine. ready for immediate use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32949 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Giedpsxy Amqofx Aa Isl We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, Equipment: all wheel drive, Liebherr 524 Gisdpfxjxy Dz Aj Aa Iel Drive pump new! Chassis number: VATZ0438CZB016402 Z lift frame Year of manufacture: 2007 Liebherr 4-cylinder inline engine, water-cooled, with turbocharging and intercooler, 86 kW - 118 HP Version: 33 km/h - hydrostatic drive with 2 speed ranges * Quick coupler * Central lubrication system * Air conditioning * 4 additional work lights on front cabin roof * 2 additional work lights on rear cabin roof * Rotating beacon on rear of cabin roof (warning light) * 2 crane lugs at rear Brakes: Self-locking hydrostatic drive acting on all 4 wheels plus hydraulic accumulator brake system with wet disc brakes in the differential housing (two separate brake circuits) Machine width: 2500 mm * Tyres 17.5 x 25 VA, 2 x 100% new * Tyres 17.5 x 25 HA, 2 x 100% new automatic self-locking differentials, 45% locking value on both axles * Drive pump new Purchase price with quick coupler and bucket: €31,900 net Export? Domestic plus 19% VAT. All prices are net plus 19% VAT. Viewing by appointment! Sale only to commercial customers or for export. Sold as seen, as-is condition. No guarantee or warranty. The indicated mileage or operating hours are read from the odometer or hour meter, and we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer, and the details provided are not to be considered as warranted characteristics. The description and information serve only for the general identification of the vehicle and do not represent a guarantee in the legal sense of sales law. No claim to completeness is made. The information/descriptions and images are non-binding and do not constitute warranted characteristics. Only the specifications in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are also happy to accept your vehicle in part exchange. For further questions, please contact us. For our international customers, we prepare all customs and export documents for trouble-free international transfer.

Condition: used, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 83.178.489.6, This is a deep freezer from premium manufacturer Liebherr, year of manufacture 2022. The unit has been inspected in our in-house workshop and is fully functional. With a gross volume of 601 liters, it offers space for stackable 2/1 GN containers or E2 crates. The rounded stainless steel runners for GN containers make cleaning very easy. The Liebherr ProfiPremiumLine GGPv 6590-40 freezer offers various safety features, including the option to connect to an alarm system for optimal protection of valuable stored goods. The dynamic cooling system quickly brings products down to the desired temperature between -10°C and -26°C, thanks to the powerful refrigeration unit and professional-grade electronic controls, even at ambient temperatures up to +43°C. Defrosting is automatic but can also be initiated manually. Predefined cooling programs are available for easy operation, specifically designed for the storage of frozen goods and the deep-freezing of ice cream and frozen desserts. The unit has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Condition: Used, tested and fully functional Technical data: • WxDxH: 700 x 830 x 2120mm (external) • WxDxH: 510 x 650 x 1550mm (internal) • Type: GGPv 6590 Index 42C /001 • Serial no.: 83.178.489.6 Giedpfx Aoxz Tf Hoa Ijl • Power supply: V: 230 / A: 1.0 / W: 500 / Hz: 50 • Volume: 601 liters (gross capacity) • Refrigerant: R 290 • Weight: 139 kg • Year of manufacture: 2022 Further details can be found on the photographed nameplate. Additional information: • Height-adjustable feet: Where daily hygiene is essential, height-adjustable feet provide sufficient ground clearance and ensure easy, convenient cleaning underneath the unit. • NoFrost technology: Never defrost again – Liebherr’s NoFrost professional-grade equipment provides reliable long-term freshness. Frozen goods are cooled with circulating air and moisture is dissipated, keeping the freezer compartment completely frost-free and preventing food from becoming iced over. • Temperature alarm: The integrated temperature alarm signals if preset temperature thresholds are exceeded or undercut. This alarm is equipped with both acoustic and visual alerts, ensuring maximum safety for stored goods. • Reversible door hinges: Units are supplied with a right-hand door hinge as standard. Thanks to the option to reverse the door hinge, the unit can always be optimally positioned in the installation area and individually adapted to your needs. • SwingLine: The elegant SwingLine design with illuminated side edges makes these appliances the first choice for the highest design requirements. The elegantly curved construction makes Liebherr appliances a visual highlight in professional settings. The SwingLine doors feature an integrated recessed handle along the full height of the door, making them ergonomic, easy to open, and particularly easy to clean. Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 250.000 kg Identification Serial number: 088666 Other information Gjdpfx Aowz Ut Isa Ioil Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 15.86x2.99x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, operating hours: 9,695 h, LIEBHERR PR 736 LGP DOZER Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2017 ? BETRIEBSSTD. 9695 Std EQUIPMENT: ? Radio ? AIRCONDITION ? Joysticklenkung Gijdpfxexzm Rie Aa Isl ? Hydraulikleitung für Schnellwechsler TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: good (used), mileage: 108,537 km, color: orange, lifting height: 72,000 mm, Year of construction: 2014, operating hours: 5,551 h, Drivetrain Drive: Wheel Make of engine: Liebherr Weights Empty weight: 60.000 kg Functional Mast length: 7.200 cm Lifting capacity: 200 kg CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: 093450 / WLFA54AZ2FEZZ0102 Other information EPA Marked: yes Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Carrier engine: Liebherr D856 Upper engine: Liebherr D934 Upper hours: 12599 h Counterweight: 72000 Transport dimensions (LxWxH): 15,4x3x4 Production country: DE Min boom length: 1320 cm Additional information Gsdpfx Aaoxvk Sto Ieil Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information jib not available for this crane

Condition: used, functionality: fully functional, mileage: 178,419 km, fuel type: diesel, overall weight: 50,000 kg, first registration: 03/2011, Year of construction: 2011, operating hours: 5,953 h, machine/vehicle number: IF75RFR, Equipment: ABS, additional headlights, adjustable boom, air conditioning, all wheel drive, cabin, crane, onboard computer, parking heater, traction control, trailer coupling, Liebherr Crane - Model LTM 1050-3.1 Application: construction Gijdpfjxnkc Nox Aa Iol Drive: wheels Own weight: 39,500 kg Lifting capacity: 50,000 kg

Condition: used, Year of construction: 2014, operating hours: 11,800 h, Equipment: all wheel drive, New arrival: Liebherr L 542 Z 2plus1 Chassis number: VATZ1269CZB035975 Year of manufacture: 2014 Operating hours (read off): approx. 11,841 Delivery date: 20.05.2014. Service history available on Liebherr central computer up to 27.09.2023 – 10,076 hours 4-cylinder inline engine, water-cooled, turbocharged, Emission Stage IIIB, 155 HP Permissible total weight approx. 17,000 kg, unladen weight approx. 15,000 kg Godsxy Dz Nspfx Aa Ioil Machine width: 2,500 mm Hydrostatic travel drive with 3-speed transmission Equipment: - Ride control - “Comfort” driver’s seat with pneumatic suspension (with seat heating) - Radio with CD and USB connection - 2 work lights at the rear driver’s cab roof - 4 work lights at the front driver’s cab roof - Automatic engine shut-off after 5 minutes at idle - 3rd hydraulic control circuit – proportional control via joystick - Pre-filter for engine air intake “TOP-AIR” - Automatic central lubrication system (Liebherr factory installation) - Access aid for easier cleaning of the windscreen - Lint screen in front of cooling package prevents radiator contamination - Coarse-mesh radiator for easier cleaning - Reversible fan for cleaning of the cooling package - Coolant pre-heating (with 220 V) - Sun visors front and rear - Tilting window left in driver’s door - Adjustable steering column (height and tilt) - Tilting window left in driver’s door - Tilt cylinder – piston rod protection - Reversing warning system (“beeper”), can be switched off - Provision for rotating beacon - Reversing camera Tyres: 20.5 x 25 L3 Front axle 2 – 95% tread, as new Tyres: 20.5 x 25 L3 Rear axle 2 – 95% tread, as new Offered with fixed mounted 2.8 m³ bucket – price: €43,900 net Optional equipment at extra cost: - Hydraulic quick coupler €3,550 (incl. conversion from fixed bucket to quick coupler bucket) - High-tip bucket from 3.0 m³ to 5.5 m³ from €4,950 - Bucket with clamp for QC, 3.0 m³ from €3,660 - Light material bucket 4 m³ €4,500 - 4-in-1 bucket 2 m³ on request - Pallet forks 5 or 8 tons from €1,990 - Available with used weighing system as well! Pfreundt WK 50 – €3,950 Printer for scale €850 All prices net export – domestic plus 19% VAT Sale to business customers or export only. Sale as is. No guarantee or warranty. The stated mileages or operating hours are those read from the meter; we do not guarantee their accuracy! Subject to prior sale. Vehicle description does not constitute a binding offer, and details are not to be considered as warranted characteristics. Description and information serve only for general vehicle identification and do not constitute warranty under commercial law. No guarantee for completeness. Stated details/descriptions and images are non-binding and not to be deemed guaranteed properties. Only those specified in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors.

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Gjdpfx Aasxvr Eno Isil Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm MACHINE DETAILS Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Condition: ready for operation (used), Used Liebherr S800 gear hobbing machine, technical data see photos. Gsdpfextu Dhex Aa Ioil

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2018, operating hours: 11,988 h, LIEBHERR LH30M. Year: 2018. Hours: 11,988. Hydraulic cabin. Solid tyres. Four outriggers. 7.80 m industrial boom. 6 m industrial stick. With cylinder for attachments. CE certificate. Very good overall condition. Gjdpfjxqztwox Aa Ioil

Condition: used, Year of construction: 2011, operating hours: 17,000 h, Equipment: ABS, all wheel drive, Liebherr L 576 2plus2 Year of manufacture 2011 17,000 hours Scale Central lubrication system Air conditioning GERMAN MACHINE, first owner Weight approx. 27.5 tons Bucket approx. 4.5 cubic meters Tel: We are happy to take care of your financing or leasing. EU sale: net upon presentation of company documents and tax/VAT number. Gedpewqy Shefx Aa Isil VAT deposit 2,000 € We speak English. We speak Srpsko-Hrvatski. Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station Tel:

Year of construction: 1982, condition: ready for operation (used), Cutter speed: 250rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, indexing gear diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, cutter slide travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Documentation available. An on-site inspection is possible. Gjdpoxq Eybofx Aa Ioil

Condition: used, Year of construction: 2012, operating hours: 5,626 h, Equipment: all wheel drive, New arrival!! Liebherr L 514 P (Parallel Lift Frame) Stereo Loader (articulated steering + rear axle steering – extremely maneuverable!!!) Last model year without particle filter and AdBlue!!! Chassis number VATZ1115AZB 031099 Operating hours according to meter: 5626 72 kW 98 HP, Total weight: 10,500 kg Unladen weight: 9,000 kg * Hydraulic control circuit for high-tip bucket, grapple bucket, clamshell bucket, snow plow * Automatic central lubrication system * 2 work lights on cab roof (front) * 2 work lights on cab roof (rear) * Comfort seat with suspension * Adjustable steering column * Radio pre-installation * Engine air intake with pre-separator TOP-AIR * Rotating beacon (blinker) at rear center cab * Reversing camera with separate monitor * Main electrical master switch Hydrostatic drive with 2 speeds Tires: Front axle: 17.5 R 25, 20% good Rear axle: 17.5 R 25, 40% good Width: 2,400 mm Various buckets for this machine in stock Additional equipment available at extra cost: Clamshell bucket 2.0 m³ from €3,250 High-tip bucket, 2.0–2.5 m³ from €3,950 High-volume bucket 3.0 m³ No. 59 – €2,950 Screening/mixing bucket 5-ton pallet fork from €2,190 Gedpexlw Imefx Aa Isil Price with quick coupler and 1.6 m³ bucket: €43,900 net + VAT. Other equipment available on request! All prices are ex-stock, net price + 19% VAT for domestic sales or for export! We are happy to arrange transportation to your location. Sale only to commercial customers or for export. Sale as is, as seen. No warranty or guarantee. The listed mileage and operating hours are read off the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided shall not be regarded as guaranteed characteristics. The description and details serve solely as general identification of the vehicle and do not constitute a warranty in the legal sense. No claim to completeness is made. All details/descriptions and photos are non-binding and do not constitute guaranteed properties. Contract terms in order confirmation and invoice are binding. The seller assumes no liability/warranty. The advertisement may contain typographical or transmission errors. The seller has not inspected the machine. Features may require individual verification. We are also happy to consider your vehicle in part exchange. For further questions, please contact us. For our international customers, we prepare all customs and export documents for fast and trouble-free overseas transport.