Used Okuma Multus U3000 for sale (3)

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Nwedpou U E Avsfx Afxon Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Nsdpfx Aewu I Irefxjwn Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: excellent (used), Year of construction: 2023, CNC Turning and Milling Center with Sub-Spindle, Y- and B-Axis Only 99 spindle hours Manufacturer: OKUMA Model: MULTUS U3000 1SW 1500 Year of manufacture: 12/2022 – Commissioned in 2023 Control: OKUMA OSP-P3000SA Operating hours, approx.: Spindle run time: 99 h, NC run time: 278 h (as of July 2025) Tooling system: Capto C6 TECHNICAL DATA: Turning diameter: 650 mm Turning length: approx. 1,500 mm Main spindle speed: 5,000 rpm Motor: 22kW, 427 Nm Number of tools: 80 Spindle nose KK size 6, front bearing Ø 120 mm, spindle bore Ø 80 mm, 2-speed spindle, range shifting at full speed Sub-spindle: front bearing Ø 120 mm, spindle bore Ø 80 mm, 2-speed operation, range shifting at full speed, available on W-axis, spindle synchronization, programmable axial pressure for secure face contact, jaw cleaning with air C-axis 360°, positioning in 0.001° increments Y-axis travel +125 / -125 = 250 mm B-axis 240°, positioning in 0.001° increments Tool spindle (Okuma motor spindle) 22 kW / 120 Nm / 12,000 rpm SPECIAL FEATURES: • Enlarged main spindle KK size 8, front bearing Ø 140 mm, bore Ø 91 mm • Hollow clamping cylinder Ø 86 mm SMW VNK T2 200-86 with bore Ø 86 mm • Cylinder flange • Full-stroke cylinder SMW SIN-S 175 • Tooling system Capto C6 for H1-turret • External and through-tool spindle air supply for turning holders and rotating tools (switchable between air/emulsion) • Tool magazine with 80 positions • Coolant flushing via M-function, for main and sub-spindle • Hinge belt chip conveyor • Drum-type filter TMF 300 • Supply pump TC 160/740 pressure: 8 bar, TH428A690 pressure: 20 bar • Bar feeder interface • Programmable workpiece catcher Nsdpew U Ey Rofx Afxewn • Robot-loader interface • Electric door automation • Automatic shutdown • In-process measurement, Renishaw probe • Y-axis measurement • Automatic zero-point shift in Z- and C-axis • Multifunction tool software for radially mounted indexable inserts • Control expansion kit KIT One-Touch IGF-N-D: – Dialog programming Advanced One-touch, automatic job planning – Circular arc tapping – Programmable tool life, call-up of sister tools by time in cut, quantity, correction addition, and tool wear EQUIPMENT: • Sub-spindle, turning length approx. 1,500 mm and H1 turret • Collision Avoidance System (CAS) • 19” color LCD TFT with multi-touch screen • Tool monitoring system • Tool measuring device • Handwheel • MacMan machine management • Part program memory 2GB • 2x USB 2.0 • Ethernet • Remote diagnostics prepared (service costs may apply) • Harmonic spindle speed oscillation via periodic speed variation • Tool height correction in Y for turning tools • Circular thread milling X/Z/Y/B (helical interpolation) including eccentric milling X/Y/C • Hi-Cut Pro high-speed control for rotating tools • 10 workpiece zero points • Coordinate transformation (shifting, rotation) • Electric spindle orientation +/- 0.1° New price: over €530,000 This used machine can be inspected under production conditions. All details are without guarantee – sale excluding any warranties or liability. Subject to prior sale.