Used Panhans 680/200 for sale (3)

Condition: new, Year of construction: 2024, Exhibition Machine Year of Construction: 2024 Equipment and Technical Data: Robust German engineering for trimming, cross-cutting, formatting, mitre cutting, etc. - Top-mounted control panel at eye level, swiveling, incl. fence guide - 7" touchscreen control for the electromotive positioning of cutting height, saw blade swivel adjustment, cut width stop and optionally for the height and side adjustment of the scoring saw Auto-EPS. Tool database for 50 saw blades and display of the current speed. - Electromotive height and swivel adjustment - Swivel range of the saw blade from 0 to 47° - APA saw blade quick clamping system - Speed of main saw blade 3000/4000/5000/6000 rpm - Protective device that can be swiveled away on both sides, safety guard with interchangeable insert wide/narrow for saw blades up to Ø 450 mm - Width stop with a cutting width of 1250 mm, electromotive - Trolley with a cutting length of 3200 mm and locking every 50 mm - Cross slide with support roller and adjustable extension in both directions. Length stop with mm scale and extension up to 3500 mm with 2 adjustable folding stops and 1 end stop, simultaneously usable as an angle mitre stop on both sides, infinitely adjustable from 0-46° with automatic length compensation and detent for 15°, 22.5°, 30°, 45° fixable. - Push-button control with electronic soft start (start/stop) - Electronic, maintenance-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at the width stop 1250 mm, electromotive - Length stop on the cross slide extendable up to 3500 mm - Max. saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast iron table top 1200 x 665 mm - plus table extension 750 x 655 mm - Table extension 1430 x 940 mm - Table height / working height 900 mm - Extraction connection 120 mm on the machine body, 80 mm on the safety guard - Motor power 5.5 kW / 7.5 HP - Electrical voltage 400 V / 50 Hz - Trolley, length and width stop profiles anodized - Machine body and swivel arm powder-coated in anthracite RAL 7021, cladding sheet safety guard on top in violet blue RAL 5000, on the machine body in light gray RAL 7035 - Footprint: 7110 x 4150 mm - Weight: approx. 1050 kg depending on the model, up to 1250 kg - CE compliant, GS tested, BG-wood dust tested Special equipment: Incl. scoring unit 0.55 kW, electromotive positioning for side and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table into a lateral parking position, so that larger saw blades than Ø 350 mm can also be used without removing the scoring saw blades. Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Kslhcdwjw I Ummj Iolw Incl. Quickstep scoring system: Tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by incremental adjustment by 0.05 mm per step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 Incl. SWIVELING DEVICE FOR THE CROSS SLIDE Quick and ergonomic sliding into the parking position Incl. Length stop with digital display mounted on each stop flap, adjustable to 0.1 mm, length max. 3300 mm

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Kolhcdoq H Sqdjw Ijlw Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Keljyx Et Hohcdw Islw Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.