Used Stahl Chain Hoist for sale (458)

Condition: used, Electric trolley, electric trolley for chain hoist, crane trolley, trolley, rolling trolley For double T-beam STEEL type GU-A035400 . 0104671 Year of construction 1986 Load capacity approx. 1100 kg Nodpfsl Ab Rtox Af Hsdc Roller diameter approx. 80 mm track width from 65 mm to 110 mm driving speed 12,5 m/min Motor power 0,42 kW Mains connection 380 Volt, 50 Hz. weight 20 kg good condition

Condition: like new (used), functionality: fully functional, machine/vehicle number: ST 1005-8/2 1/1, Year of construction: 2021, lifting height: 8,000 mm, chain length: 9,000 mm, load capacity: 500 kg, lifting speed: 133 mm/s, fine lifting speed: 33 mm/s, type of input current: three-phase, The overhead crane is in like-new condition and has been used very little. The chain is well-maintained and greased. Ndsdpfezn H Twox Af Hoc Manufactured and calculated by Ralf Brinkmann GmbH. Transport within Switzerland and export can be arranged; the buyer bears the costs. Technical data: Load capacity: max. 500 kg Runway type: IPE runway beam Runway length (fixed): 12,000 mm Runway length (movable): approx. 9,595 m of which 4,615 mm (extending from the building) System consisting of: 12.00 m IPE runway beam for attachment to the existing concrete ceiling (2 pieces of 6,000 mm each with connecting elements) - Mounting plate on top - 9.59 m IPE runway beam, for movement on the "ceiling rail". intended for attachment via the following travel units. Additionally, it has two counter-pressure rollers, at the rear. Eyelet for attaching the hand trolley to be able to retract the telescopic rail, at the rear end of the telescopic rail. 2x hand travel unit for manual movement of the telescopic rail 4x set of end stops (stoppers) designed as bolted angles 2x C-rail system / cable management system for supplying power to the electric chain hoist / electric travel unit (no ideal control!) 1x hand trolley, for retracting the telescopic rail. 1x STAHL Crane Systems electric chain hoist ST 1005-8/2 1/1 Manufactured according to the rules of the EC Machine Directive, Device Safety Act, and BGV. Lifting mechanism operating mode according to DIN EN 13001-2: HD1 Motor classification (FEM/ISO): M4 Load-bearing component classification (FEM/ISO): M5 Protection type EN 60529: IP55 Designed for operation in an indoor environment, ambient temperature -20 to +40°C Lifting mechanism load capacity 500 kg Lifting height 8.00 m Lifting speed 2.00 / 8.00 m/min Power (nominal) 0.20 / 0.80 kW Design data, see product information / motor data sheet Duty cycle 20 / 40 % Load chain galvanized Travel unit electric travel unit, short overall height Travel speed 5.0 / 20.0 m/min Power 0.07 / 0.32 kW Duty cycle 20 / 40 % Flange width 200 mm Electrical system Contactor control Operating voltage 400 V Control voltage 48 V System frequency 50 Hz Control unit STH incl. 6.80 m control cable Paint finish Hoist - Topcoat polyurethane 80 µm Topcoat lifting mechanism in RAL 7021 color, black gray Topcoat control box and fan cover in color RAL 6018, yellow-green Note: Overload protection and emergency lowering by slip clutch (must not be operated under normal conditions) Equipment - Travel switch on both sides - Lifting end switch for upper hook position - Guide for cable-mounted power supply, 505 mm - Radio remote control with emergency control unit STH (transmitter Quadrix, receiver FSE308 with integrated horn (91 dB) and signal light, charger, replacement battery, belt clip, adhesive symbols) Documentation: - Installation declaration according to Directive 2006/42/EC for machinery - Test book - Load capacity labeling according to UVV standards - Operating manual for cranes Currently, the crane is disassembled and stored in a hall in Switzerland, near the German border.

Condition: excellent (used), Year of construction: 2003, Chain hoist crane, 500 daN, year of manufacture 2003 Nedpfx Aexu Ek Usf Hjdc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 2591, load capacity: 3,200 kg, Stahl 3,200 KG double-girder overhead crane. - Span: 7,900 mm - Lifting capacity: 3,200 KG - Lifting height: 6 m - Year of manufacture: 2000 - Trolley with hoist renewed in 2019 Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Vahle conductor bars Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl Nodez Ea Ndspfx Af Hedc

Condition: used, machine/vehicle number: 3527849, Year of construction: 1969, Load capacity (two-strand): 600 kg with lifting speed: 6 m/min Lifting height: 4 m Nedpfxsb H Iq Hj Af Hodc Electrical connection: 380 V, 0.88 kW Approximate weight: 40 kg

Condition: used, Year of construction: 2010, load capacity: 750 kg, This Carl Stahl electric high-lift pallet truck, model: EGPK 075/13-So, will be auctioned off online as part of our industrial auction / machinery auction, following the closure of the J&S GmbH Automotive Technology - BGA - warehouse equipment, shelving, and materials site. Nsdpj Aa Rmpjfx Af Hsdc You can find this and many other items on our platform.

Year of construction: 1968, condition: good (used), Steel chain hoist, Elektus A2 type, 380 volts, 2 lifting speeds, 3-meter chain length, 12-meter cable length, control pendant. Njdpfx Aed E Akcsf Hodc

Year of construction: 1969, condition: good (used), Steel chain hoist, type T 302, 400 volts, 2 lifting speeds, chain length 3 meters. Njdpfed E Akkox Af Hedc

Condition: good (used), Year of construction: 1991, Offer 21146 Technical Data: - Load capacity: approx. 12.5 t - Lifting height (hook path) max.: approx. 5 m - Crane girder width adjustable up to 250 mm - Motorized trolley travel - Travel wheel diameter - Control button Nodpjy R Ag Iefx Af Hsdc - Control cabinet - Cables - Operating hours (read): 171 h - Weight: approx. 400 kg

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 12 28 895, total height: 2,500 mm, total length: 3,000 mm, total width: 1,000 mm, load capacity: 400 kg, main lifting speed: 8,000 mm/min, fine lifting speed: 33 mm/s, throat depth: 2,800 mm, working height: 2,500 mm, Technical specifications Manufacturer: STAHL Fördertechnik GmbH Type: T202 Load capacity: 400 kg Year of manufacture: 1995 Supply voltage: 380 V / 3-phase / 50 Hz Lifting speed: 8 / 2 m/min Motor power: 1.3 / 1.1 kW With pendant control, chain and hook Complete with column-mounted swivel arm STAHL lifting equipment is reliable and durable, even in industrial environments. The T202 model, a 400 kg chain hoist, is known for its lifting speed of 8/2 m/min. Condition Used, industrial equipment in good condition. Sold in the complete condition as shown in the pictures. Price: 1,000 EUR STAHL 400 kg Electric Jib Crane with Electric Chain Hoist – 1,000 EUR Description For sale is a STAHL electric jib crane complete with an electric chain hoist, pendant control and lifting chain. The unit is in good used condition and is ready for operation. STAHL is a well-known German manufacturer of high-quality industrial lifting equipment, recognized for its reliability and long service life. Technical Specifications Manufacturer: STAHL Fördertechnik GmbH Model: T202 Load Capacity: 400 kg Year of Manufacture: 1995 Power Supply: 380 V / 3 Phase / 50 Hz Lifting Speed: 8 / 2 m/min Motor Power: 1.3 / 1.1 kW Electric Chain Hoist Pendant Control Included Lifting Chain and Hook Included Complete Jib Crane Assembly Condition Good working condition Complete unit Ready for installation Industrial quality German equipment Included Electric chain hoist Ndedpszkam Aofx Af Hsc Jib crane Pendant control Lifting chain Hook Price: €1,000 Location: Hungary Seller: Variflux Kft.

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 45 kg, load capacity: 3,000 kg, Load balancing device, also commonly referred to as a "balancer," can be used in crane operations. A chain hoist is used to bring loads into a horizontal position or a specific angle of inclination; this can include, for example, wall, roof, and ceiling elements, or also precast concrete components such as stairs. Njdpfez Ntlbox Af Hsdc

Condition: used, operating hours: 12,200 h, load capacity: 750 kg, This Carl Stahl electric tow tractor will be auctioned online as part of our industrial auction / machinery auction, NACHAUKTION, due to the closure of the J&S GmbH Automotive Technology – BGA – warehouse facility, including shelving and materials. You will find this and many other items on our platform. Nsdpfx Ao Aa Rnaef Hsdc

Year of construction: 1976, condition: used, machine/vehicle number: TH20010161, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm with steel hoist and floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Nsdpfxjv A Sa No Af Hsdc Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Year of construction: 1970, condition: used, machine/vehicle number: TH20010142, Demag bridge crane, crane canopy, crane track, indoor crane, crane Ndsdpfx Aov A Rxksf Hsc Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm with steel hoist with floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: used, functionality: fully functional, Year of construction: 1975, machine/vehicle number: CR2360 / 075, Abus / Steel - Year of manufacture approx. 1975 - Abus chain hoist, year of manufacture 2008 1-girder suspended crane, bridge crane, crane system, hall crane, portal crane, suspended crane system Load capacity 2000 kg Width approx. 8.4 m, gauge approx. 7 m Crane girder INP240 Ndjdpfx Ajzv H H Hjf Hsc Includes running gear, complete control system, floor-level operation via control panel, chain hoist Abus GM6-2000.5, 2-strand All cranes can be moved electrically in all 3 axes Lifting height/hook travel approx. 4 m Connection to 400V 16A Year of manufacture approx. 1970/2008 Good used condition Shipping via freight forwarder, collection preferred Location: 75053 Gondelsheim Please inquire about shipping costs based on your postal code; we will immediately provide you with a non-binding offer!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WJ-MKS315, overall weight: 213 kg, type of input current: three-phase, input voltage: 400 V, Special offer: WEIBERT steel circular saw MKS 315 incl. 2 roller conveyors For sale is a WEIBERT steel circular saw, model MKS 315, including 2 roller conveyors. The sale is part of a company liquidation and is offered at a special price. • Machine: WEIBERT steel circular saw MKS 315 • Accessories: 2 roller conveyors (1 piece 5200 mm, 1 piece 2200 mm) • Shipping: By arrangement and for an additional charge An interesting opportunity for commercial and industrial companies looking to purchase a steel circular saw at an attractive price. Nodpfx Aez Rm U Esf Hsdc If you are interested or have any questions, please do not hesitate to contact us.

Year of construction: 2012, condition: like new (used), machine/vehicle number: W111, Steel crane track suspension crane circular track 3x250Kg chain hoist crane Ideal for car washes, electroplating, etc Circle dimensions 6x2.3m (curved HEB140 beams) + Power rails / power supply + 2x 12m substructure HEA 180 + wall brackets + 3x 250Kg chain hoists - electrically movable - trolley travel and lift (approx. 4m) Each chain hoist can be controlled independently of one another Crane is dismantled, packed and immediately available New condition Ndjdpfx Afji Ammyj Hjc Collection by appointment in 75053 Gondelsheim Forklift is available for loading Shipping by forwarding agency possible, please inquire with zip code

Condition: used, Year of construction: 1992, Technical details: lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm total power requirement: 2,3 kW Crane with carrier and electric rails: Nedpfou Nvgdox Af Hedc -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook -Pendant control panel Pendant station -div. mounting holes *

Year of construction: 2008, condition: good (used), - OFFER 21077 - Ndsdpfoglu R Hjx Af Hsc Technical data: - Load capacity, electric chain hoist: 250 kg - Lifting speed: approx. m/min - Chain hoist operation via hand-held remote control - Manual operation: lifting mechanism / transverse travel + longitudinal travel - Track gauge: variable up to approx. 3500 mm - Hook height: approx. 2800 mm - Crane runway length: approx. 5000 mm - Overall height: approx. 3900 mm - UK crane support: approx. 3000 mm - 4 steel supports made of rectangular tube, 150 x 100 mm, H 3900 mm - 2 longitudinal travel carriage beams: approx. 5000 mm - Transverse travel carriage beam: approx. 3500 mm - Weight of the system: approx. 1000 kg

Year of construction: 2008, condition: good (used), - OFFER 21078 - Technical data: - Load capacity, electric chain hoist: 250 kg - Lifting speed, approx.: m/min - Chain hoist operation via handheld remote control - Manual operation: lifting mechanism / traverse and longitudinal travel - Track gauge, adjustable up to approx.: 3000 mm Ndedjgl Ap Njpfx Af Hec - Hook height, approx.: 2200 mm - Crane track length, approx.: 4000 mm - Overall height, approx.: 3500 mm - Lower crane girder, approx.: 2700 mm - Lower longitudinal rail, approx.: 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm, H 3500 mm - 2 longitudinal frame supports, approx.: 4250 mm - Traverse frame support, approx.: 3000 mm - Weight of the system, approx.: 1000 kg

Condition: not inspected (used), functionality: unexamined, Year of construction: 1996, machine/vehicle number: 54 10 544, load capacity: 6,300 kg, power: 7.8 kW (10.61 HP), main lifting speed: 41 mm/min, 2x Stahl cat 6,300 kg center-to-center distance: 1,400 mm wheel track: 50 mm length between wheels: 1,800 mm Njdpozun Rqofx Af Hjdc total length: 2,000 mm price per unit

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: EM263 - IS4091, Steel crane, overhead crane, bridge crane, workshop crane Payload / lifting capacity 6.3 t - 6300 kg Gauge 11,390 mm, overall dimension approx. 11,550 mm TYPE EL-C 63 - 11.205 E Year of manufacture 1996 Lifting height 6 m Overall height from top of crane to hook approx. 950 mm Head girder length with buffer approx. 2180 mm With floor-mounted control Crane is disassembled and immediately available Nsdpfjzv H Ecex Af Hjdc Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Njdpozv H Anjfx Af Hodc Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Nsdewgwrqspfx Af Hodc Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist Nsdpfx Ajxbx R Iof Hjdc -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Number: 3x steel cable available -Price: per piece -Transport dimensions: Ø 440 x 110 mm / Ø 430 x 95 mm -Weight: 10.7 kg / 11 kg