Used Tec Rotec for sale (87)

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg Gbjdpfx Asdzqb Eoa Ieg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: new, maximum load weight: 30,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,770 mm, Year of construction: 2025, Equipment: ABS, Equipment: * Tank volume 30m3, Ø2200mm, wall thickness 3mm, temperature 0-60°C * Extended swivel pipe * 4" flushing line with 2 free falls of 2.5", 1x at the front and 1x in the middle of the tank. * Flushing line on the left side ü Tension cables over the hose trays * Automatic pump shutdown. ü Axle also equipped with anti-spray mat * Bracket with 2 wheel chocks * Left and right (narrow and high) hose racks, each 5m, made of galvanized steel (250mm wide, 190mm high). Pump * Vogelsang pump, 6,000L / min. Axles * 9 ton axles Valx Ø430 disc brake, ET120 Brake * EBS braking system Wabco * TPMS ü Wabco Tire Pressure Monitoring System in accordance with R141 * No electronic air suspension Extra options * Third axle as a trailing axle. Lift axle * Automatic lift axle on the first axle automatically switched depending on the load, or by applying the brake 3 times. * With traction aid, load on the 2nd and 3rd axle up to 130% under 30 km/h. Tire size * Tire size 385/65 R22.5 Tires * Apollo Lighting * 24 volt lighting device Lighting options * Flashing side marker lights * Work lights left and right, on the first axle. * 2x LED work lights at the rear. 1x left, 1x right mounted on the hose racks Painting Painting of the tank in RAL 7030 STONE GRAY * Painting of the chassis in RAL7016 ANTHRACITE GRAY Other * Free fall connection at the rear of the pump. Connection with manual fitting 6? ball valve for emptying the tank, venting container made of V2A * Docking funnel 8? at the top of the rear. Pipe down to the bottom of the tank with a manual slide. Gedpjwwn Absfx Aa Isbg

Condition: used, Year of construction: 2000, functionality: fully functional, Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of manufacture: 2000 Condition: used, under power, control on Windows 7 NEW x-path 600 mm y-path 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm 18-position tool changer Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röders Jobmanager (for processing several workpieces in succession) Probing programs for almost all common geometries Gedpow Einuefx Aa Ijbg Extor extraction system for dusty machining Minimum lubrication Bed path blower Blum measuring laser (for tool measurement length + diameter + contour and breakage control) Tool cleaning (air) Cooling unit for spindle and switch cabinets documentation

Year of construction: 2021, condition: new, Wld Tec™ Fuego SCS, laboratory burner with IR sensor and LCD display, supplied with CV360 pressure regulator. We have three of these burners. The burners are new, unused – 3 pieces. The price is per piece. Gjdpfsw Rpbkjx Aa Iebg

Year of construction: 2016, condition: excellent (used), 24V , 100VA , max.7 bar Gbedpelqwz Tsfx Aa Ijg

Year of construction: 2006, condition: excellent (used), The sieve machine is designed for the homogenise seiving of dry and fine products and to the reduction of the oversize particles to the desired size with help of breakers. Size of sieve (cylindrical): different size possible Sieve insert diameter: 80 mm Sieve length: 110 mm Output approx.: 20-100 kg/h Motor power: 0,55 kW Gbedpfjd H Sdqjx Aa Ieg Motor speed: 3000 rpm Adjustable speed: 500-3000 rpm Breackers are incerted for reduction of oversize particles.

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Gbjdpfxsdzqpto Aa Ieg Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: good (used), Year of construction: 2001, operating hours: 6,785 h, functionality: fully functional, machine/vehicle number: 88745-38, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, table load: 800 kg, spindle speed (max.): 36,000 rpm, New spindle and computer installed in 2018 No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X / Y / Z: 800 / 600 / 400 mm Number of axes: 3 Speed: 36,000 rpm Tool holder: HSK 50 E Tool changer: 30-station Table: 880 x 700 mm Workpiece weight: 800 kg MACHINE DETAILS Dimensions: approx. 2.85 x 3.15 x 3.0 m Weight: approx. 8.5 t On-time: 179,460 h (total) On-time since 2018: 38,141 h Spindle hours since 2018: 6,785 h Gbedpfx Aajwi Ndks Ieg EQUIPMENT - Incl. 29 tool holders - No coolant/minimal quantity lubrication - Spindle cooling system - Incl. probe - Without Vice and clamping device (shown in picture)

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll to roll (100m/min). sheet material can also be processed, separate insertion tables are included exchange cassette (structure fine linen) Gbsdpfx Aohr Rlyea Iog The machine is in a very good condition, few operating hours machine book / instruction manual

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Gbjdpfxewhc U Ts Aa Ieg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Ceramic angle standard from Wilbanks (CoorsTec) 600x460x80mm Gbedpfx Asq Tdlzoa Iog Perpendicularity < 4µm Little used, very good condition Measurement protocol on request (surcharge)

Condition: excellent (used), Year of construction: 2021, Year of construction: 2021/2022 Space requirement for entire system: 10x32 meters Total connected load: approx. 350 kW Peak value: approx. 120 kW Average value: approx. 90 kW Personnel requirement: min. 2 people Cutting capacity: maximum 80-100 fm/8h Round log diameter: min. 10cm max. 100cm Round log lengths: min. 100cm max. 600cm Edging system: 3-stack variable / 120mm cutting height Due to a restructuring of the company, a new, complete band sawmill is for sale as follows: Godpfx Aovw Ry Dsa Ijbg - Round log feeder - Block puller - Balz debarking machine BG 90 6W-GR - Steep conveyor with feeder - Tension carriage ELCA Legno CRO 17 - Band saw ELCA Legno SNI 14 - Conveyor belt - Trimming machine Möhringer 323 001 12 - Stacking system M-TEC - Disposal line / chipping system ZENO ZTI 600/520/160