Used Trumpf Laser Cutting Machine for sale (402)

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We offer a generator and a resonator TRUMPF TCF1. Hnjdpov Ic Sasfx Afpju These components come from a portal 3D laser

Condition: refurbished (used), functionality: fully functional, Year of construction: 2008, operating hours: 55,000 h, laser hours: 25,000 h, laser power: 4,000 W, working range: 3,000 mm, Equipment: cooling unit, We are selling a regularly maintained laser cutting machine. The machine is fully functional. The machine is under voltage and a test is possible. Sold without loadmaster. We are selling a regularly maintained laser cutting machine. The machine is fully functional. The machine is under voltage and a test is possible. Sold without loadmaster. Technical data: - X-travel 3000 mm (max. 3104) - Y-travel 1500 mm (max. 1580) - Xp-travel 300 mm (max. 305 mm) - Z-travel 114 mm - max. material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - max. positioning speed parallel to the axis 120 m/min - simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y-axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y-axis 15 m/sec. Standard equipment - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic XP axis Ppobn Dthsixl Tnewqst Hnjdpfovupbuox Afpou - Automatic pallet changer - Closed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focus position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensors - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray virgin - Position laser diode - Programmable cutting gas pressure - Automatic switch-off - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lens and quick-change device - ControlLine, capacitive height control and process control - Sinumerik 840D control: Open control - Causes of error messages via diagnostic functions Extended machine equipment - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h Hjdpfxsxlctzo Afpenu EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,265 h, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Maximum Speed: 140 m/min Control: SINUMERIK 840D SL Laser Excitation: Diode Module Chiller Unit: Air/Water LASER DATA - TRUDISK 3001 Laser Power: 3,000 W Sheet Thickness, Mild Steel: 20 mm Sheet Thickness, Stainless Steel: 15 mm Sheet Thickness, Aluminum: 15 mm Sheet Thickness, Copper: 6 mm Sheet Thickness, Brass: 6 mm MACHINE DETAILS Length: 11,150 mm Width: 6,650 mm Height: 2,200 mm Base Machine Weight: 12,000 kg Laser Beam On Time: 13,265 h (03.02.2023) Laser On Time: 3,172 h (03.02.2023) EQUIPMENT - Semi-automatic pallet changer - Laser beam guidance via fiber optic cable - Linear motor technology - Integrated control cabinets - Slag boxes - Laser diode positioning - TruDisk driven by machine - PierceLine - FocusLine - NitroLine - Transport and positioning device Hnsdpfjxl T Rwex Afpsu - Automatic nozzle cleaning - Universal laser cutting head - Protective window monitoring - ControlLine - Lens protective glass - Internet teleservice - Programmable gas pressure - FastLine - Multi-sheet processing - Condition monitor - Micro-welding - Central Link - CE certifications - Compact dust collector - Extraction unit - Automatic pallet changer (with light barriers)

Condition: good (used), Year of construction: 2012, Trumpf TruLaser 1030 Laser Cutting Machine with TruCoax 2500 Diffusion Cooled CO2 Laser & Trumpf CNC Control 2-Axis; Sheet Size 1,500mm x 3,000mm; Fully Automatic Pallet Changer with (2) Pallets, Dimensions Approx 3,000mm x 1,600mm each; 7.1/2" Lens Cutting Head; CO2, 2,500 Watt Laser Capacity; Nitro Line; 15" TFT Screen; RJ45 & USB Interface; S/No. of Machine A025A0366. Hnedpfxjxncp Ue Afpsu Integrated KLH Chiller Unit; 400 Volt; 2 Axis; Closed Machine Frame Integrated Laser Unit; Sheet Support Accessible from both sides; Motorised Front Door & Rear Opening; Traverse Speed Approx 40 MPM; Weight Approx 8,900kg; (3) SICK C4000 Select Safety Light Curtains; (1) 3M Scotchcal 8518 Gloss Graphic Protection over Laminate 1,372mm x 45.72 Meters Drill Pallet Changer Template for Trulaser 1030 Machine (Unused).

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: A1220A0779, Trumpf CNC laser cutting machine, model Trulaser 3030 (5KW) Travel range X/Y/Z: 3000mm/1500mm/115mm, Max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, Axis speed: 140m/min, Hnsdpexnc Iwjfx Afpeu Laser type: TruFlow 5000, laser power: 5000W (5kW), Machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, Weight: approx. 12,000kg, Operating hours (see photo) Laser hours (see photo) Documentation available. On-site inspection possible.

Condition: used, Year of construction: 2024, Completed station with new laser source and commercial components easy to adjusted to any product with welding process. Composition of the station: TRUMPF TruDisk 6000, KEYENCE Vision System IV3-L50; KEYENCE Display IV3-CP50, TRUMPF HMI, SIEMENS HMI, TRUMPF Laser AG PF033-2, PRIMES PowerMeasuringModule (PMM), KEYENCE Vision system SR-X100, KEYENCE Lamp CA-DQP25X, KEYENCE Camera CA-HF2100C KEYENCE INPUT UNIT, FOR AREA CAMERA KEYENCE Vision Controller Sensor SIEMENS SIMATIC S7-1500 Hnsdoxnyuzjpfx Afpju SIEMENS SIMATIC ET 200SP SIEMENS ET200 SP Bus adapter Condition: New

Condition: new, Year of construction: 2025, laser source manufacturer: TRUMPF, laser power: 6,000 W, Equipment: CE marking, Offer: TruLaser 1030 Lean Edition Best Value for Money Machine Efficient and Powerful Laser Cutting When it comes to value for money in laser cutting, the robust machines of the TruLaser Series 1000 Lean Edition deliver results cost-effectively. They are profitable even at low utilization levels thanks to their relatively low investment costs. With 6 kW, they cut all materials up to 25 mm thickness and ensure top quality. Get started right away: Machine operation is intuitive and cutting parameters are already integrated. Wide Range of Materials and Features Structural and stainless steel, aluminium, copper, brass, and FlyLine Technologies and processes for maximum process reliability and robustness Collision protection, nanojoints Easy To Operate Qualified cutting data, Cutting Guide, online protective glass monitoring, multi-sheet processing, fully automatic pallet changer Included: TruLaser 1000 Lean Edition with fully automated pallet changer and 6 kW laser Programming software Training & Services: Including e-learning package for programming software Operator training for software Hnedpfx Afexn Irbepeu Operator training for machine TRUMPF Quality Our fast remote service support is available worldwide to assist you with any concerns. For further technical details, please refer to the data sheet or visit our website. If you have any questions, feel free to contact us. About TRUMPF: In our 100-year company history, we have helped shape thousands of sheet metal fabrication operations across Germany alone. We pass this experience on to our customers every day. With innovative machines and features, the most comprehensive service concept on the market, as well as experts in software, automation and smart factory, we ensure you always receive a customized offer tailored to your requirements. P.S.: We are also happy to assist you with financing. With TRUMPF Financial Services’ financing, leasing or pay-per-use models, we support you in both financial and business challenges.

Condition: excellent (used), Year of construction: 2008, Technical specifications: 2D laser cutting machine Hnedsxndmuepfx Afpeu CNC control: SIEMENS Laser type: CO2 Working area: 6000 x 2000 x 115 mm Laser power: 7 kW Cutting capacity, steel: 25 mm Cutting capacity, stainless steel: 25 mm Cutting capacity, aluminium: 15 mm CE marking Electrical equipment for three-phase current: 400 V / 50 Hz Pallet changer Cooling unit Operating hours “Beam On”: 13,600 Operating hours “Laser On”: 40,500 Dimensions (L x W x H): approx. 17,000 x 4,600 x 2,600 mm Weight: approx. 12 t Condition: Very good condition Machine has only been used very little The seller is not liable for typographical or data transmission errors. The machine is in a condition, both visually and technically as well as in terms of wear, appropriate to its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 33,749 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum workpiece weight: 1,700 kg Maximum speed: 140 m/min Controller: CNC Sinumerik 840D SL Positioning accuracy Positioning deviation Pa: 0.1 mm Average positioning accuracy Ps: 0.03 mm Laser data Maximum laser power: 4,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 10 mm MACHINE DETAILS Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,000 kg Total system power consumption: 11–65 kW Beam-on time: 19,152 h (28.08.2025) Laser-on time: 33,749 h (28.08.2025) EQUIPMENT - Automatic longitudinal pallet changer - Longitudinal chip conveyor - Oil vaporizer unit - PierceLine - FocusLine - NitroLine - PlasmaLine - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free radial turbine - High-frequency excitation Hnodpexl T Rdefx Afpeu - TASC laser control - Laser power control - Laser logbook - LensLine with status monitoring - Cutting head with 250 mm focal length - Quick-change cutting head unit (UTI) - ControlLine - Lens with RFID chip - ContourLine - Micro-welding - FastLine - AdjustLine - Internet remote services - FlyLine - Simple workshop programming

Condition: ready for operation (used), Year of construction: 2010, This TRUMPF TruLaser Cell 7040 was manufactured in 2010. It features a CO2 laser cutting system with extensive travel ranges: X-axis up to 4000mm, Y-axis up to 2000mm, and Z-axis up to 1000mm. Maximum travel speeds reach 173 m/min, enhancing productivity. It includes a 60 GB hard drive and supports ELA USB and Network programming on Windows 7. For more information about this machine, please reach out to us. Hjdpfx Afjxa H S Djpsnu Application Types Cutting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 37,970 h, laser power: 5,000 W, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 2,400 kg, TECHNICAL DETAILS Travel distances Travel distance X-axis: 6000 mm Travel distance Y-axis: 2000 mm Travel distance Z-axis: 115 mm Laser power: 5,000 W Maximum workpiece weight: 2,400 kg Maximum positioning speed Parallel/Simultaneous X-axis: 200 m/min Maximum positioning speed Parallel/Simultaneous Y-axis: 282 m/min MACHINE DETAILS Laser type: CO2 TLF 5000 Electrical connection: 105 kVA / 400 V (± 10%) / 50 Hz (± 1%) / 3 Phase / 160 A Gas consumption CO2: 1 l/h Gas consumption N2: 6 l/h Gas consumption He: 13 l/h Operating hours Laser hours: 37,970 h Power-on hours: 66,500 h EQUIPMENT Automatic pallet changer Longitudinal belt conveyor Hsdpfoxnqciox Afpenu PlasmaLine-PMS (Plasma Monitoring System) SprintLine Blowing Gas flushing Piercing Marking ContourLine AutoLas Plus PierceLine Note: The LiftMaster is not included in the scope of delivery or sale.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 49,660 h, machine/vehicle number: A1220A1155, degree of automation: manual, actuation type: electric, controller manufacturer: SINUMERIK, controller model: 840D SL, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 49,660 h, laser power: 5,000 W, laser wavelength: 680 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, table length: 3,000 mm, table height: 860 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, cutting speed: 140 mm/min, positioning speed: 100 m/min, positioning accuracy: 0.03 mm, workpiece weight (max.): 900 kg, power: 5 kW (6.80 HP), input voltage: 400,460 V, input current: 160 A, input frequency: 5,060 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 612 bar, overall weight: 12,000 kg, total length: 9,300 mm, total width: 4,600 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, CNC Laser Cutting Machine TRUMPF TruLaser 3030 (L20) Details: Manufacturer: TRUMPF Model: TruLaser 3030 (L20) Condition: Used Year of manufacture: 2012 Working area: 3000 x 1500 x 112 mm Max. sheet thickness / mild steel: 20 mm Max. sheet thickness / stainless steel: 15 mm Max. sheet thickness / aluminum: 10 mm Simultaneous travel speed: 85 m/min Axis-parallel travel speed: 60 m/min Equipment: Machine: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision processing - Automatic pallet changer - Longitudinal conveyor belt - Maintenance-free three-phase servo drives - Enclosed beam guidance - NitroLine - FocusLine - Plasmaline - SprintLine - ContourLine - Microweld Hnodpfjxnl Utjx Afpou - Spraying device - Positioning laser diode - Programmable cutting gas pressure - Automatic shut-off - Work area lighting - TFT color display - Machine operable in ambient temperatures up to 43°C TRUMPF Laser: - TruFlow 4000 laser incl. NitroLine - Maintenance-free turbo radial blower - High-frequency excitation - Mirror telescope - TASC laser control - Laser power control - Laser logbook function - Cooling unit Cutting head: - Laser cutting head with 5" and 7.5" lens - Quick-change cutting head system (UTI) - ControlLine Control system: - SINUMERIK 840D control - Easy operation - Diagnostic function - Integrated technology data - Teleservice Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Light barriers - Monitoring system - Multi-chamber extraction system - Compact dust collection unit - Machine enclosure with polycarbonate windows

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,200 h, machine/vehicle number: Aufbau und Inbetriebnahme möglich, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 900 kg, warranty duration: 6 months, working range: 3,000 mm, +incl.preparation LiftMaster 1530; Liftmaster against surcharge Standard equipment: - Closed machine frame with integrated laser unit - Automatic pallet changer - Longitudinal conveyor belt for small parts and waste - Drives: Gantry drive in combination with linear direct drives - Cutting head quick-change device - Laser cutting head 250mm lens - Progr. cutting gas selection/pressure adjustment - APC capacitive height and process control (ControlLine) - AutoLas Plus (FocusLine) - Laser power control - Position laser diode - Hi-Las high-pressure cutting (NitroLine) - Sprintlas (FastLine) - ContourLas (ContourLine) - PMS plasma sensors (PlasmaLine) - Lens monitoring (LensLine) - Autom. sheet metal outer edge detection - Microweld - Automatic nozzle cleaning - Oil spraying device - Work area lighting - Automatic switch-off Hsdpfxeuviyqo Afponu - Safety devices (multi-beam light barriers, encapsulated beam guidance) - Multi-chamber extraction system - Compact dust extractor - ToPs 100 lite -RJ 45 network connection - USB interface - TFT color screen - Detailed operating instructions

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,939 h, control type: CNC control, laser source manufacturer: TRUMPF, laser source model: TruDisk 4001, laser hours: 1,939 h, laser power: 4,000 W, TruLaser Cell 7020, Y1500 (L31) • X = 2000 mm, Y = 1500 mm, Z = 750 mm, B = 135°, C = n × 360° • 30 m LLK (laser light cable) • Automatic detection of focusing optics • Magnetic separation of the optic in case of collision • FocusLine • Siemens 840D control • Console and software for program teaching • Mains connection • Remote diagnostics • Documentation TruDisk 4001, 1 unit • P = 4000 watts • Beam quality = 4 mm·mrad • Laser power control Optical output for laser light Beam splitter Core Switch Hodpoxn Di Nsfx Afpsnu Water-air chiller • For TruDisk 4001 Workpiece processing WeldLine Comfort – CutLine Professional, 1 unit • Prepared for laser cutting and welding • Laser technology tables for cutting and welding • 2-in-1 laser light cable • ControlLine DepositionLine integration Metal bellows protection FlowWatch sensor • Sensor for monitoring powder feed rate DepositionLine – Powder supply Disc feeder Additional powder container 1.5 l Fill level sensor for each container Additional cleaning and extraction unit Additional dosing disc Teleservice for powder supply Nozzles Nozzle module with three jets SO16 Additional nozzle cap SO16 Adjustment device for nozzles Dynamic cutting optic f = 150 Adjustment device for cutting optic Motorized welding optic DepositionLine Camera for process monitoring FastLine Cell Wireless touch display teach panel Workpiece holding and additional axes Rotary table D = 3250 mm Connection for compressed air Metal scrap conveyor Connection for workpiece clamping Valve connection for workpiece clamping Load status indicator Extraction for rotary table Compact dust extraction system 4000 Nm³/h CO₂ fire extinguishing system 4000 Nm³/h Protective enclosure for rotary table Status lamp Additional side laser protection screen Interlocked doors Remote diagnostics for 1 year TruTops Cell license Laser Welding 3D module – 1st license Laser Metal Deposition module – 1st license

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: L3423M0470, laser power: 200 W, laser wavelength: 1,064 nm, overall weight: 500 kg, Trumpf TruPulse 203 Laser Voltage: 380 V -10% to 460 V +10%, 3-phase AC + PE Protection Class: IP 54 Power: 10 kW / 16 kVA Current: 23 A Frequency: 50 to 60 Hz Weight: 500 kg Short-Circuit Current Rating (SCCR): 5 kA Wavelength: 1064 nm Hjdpfx Aexnbt Sefponu Output Power (Pulsed): 200 W Pulse Energy: 55 to 90 J Pulse Width: 0.3 to 50 ms Repetition Rate: 833 Hz Beam Divergence: 12 mrad Peak Power: 6 to 8 kW Fiber Diameter: 300 µm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 24,000 h, General Data Hedpfx Afexa H Tuspsnu Measurements width 2800 mm Measurements depth 7800 mm Measurements height 2900 mm Machine weight 10400 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Main Drive Number of axis 3 Workpiece Workpiece weight 720 kg Max Material Thickness Stainless steel 8.0 mm Aluminium 6.0 mm This 3-axis TRUMPF TruLaser 1030 was manufactured in 2011, featuring a robust fiber laser, TruDisk 2001, with a 2 kW output and a maximum material thickness capacity for mild steel at 25.0 mm. It operates with a SIEMENS SINUMERIK 840D control and can handle a maximum workpiece weight of 720 kg. If you are looking to get high-quality cutting capabilities, consider the TRUMPF TruLaser 1030 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 31,194 h, Laser Trumpf TLC3030 – TruFlow 3200 model Laser power: 3200W Year of manufacture: 2007 Table length: 3000 mm Table width: 1500 mm Table height: 2200 mm Control system: Siemens Machine weight approx.: 12,000 kg Machine dimensions: 9300 x 4600 x 2200 mm Operating hours (as of 22.8.2025): Beam on: 31,194 h Machine on: 62,564 h Maximum sheet thickness (steel): 20 mm Maximum sheet thickness (stainless steel): 12 mm Maximum sheet thickness (aluminium): 8 mm Standard equipment: Machine: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Enclosed beam guide - One-head cutting strategy - Cooling unit - Automatic longitudinal pallet changer - Wide longitudinal conveyor belt - Work area lighting - Positioning laser diode - PierceLine - FocusLine - PlasmaLine Cutting heads: - 7.5" cutting head – universal from 0.5 mm up to 20 mm - 5" cutting head – for use from 0.5 mm up to 4 mm - 3.75" cutting head – high speed head up to 0.8 mm thickness - ControlLine: Height control and external sheet edge detection - SprintLine – optimization of cutting speed and head movement for increased productivity - PierceLine – optimization of piercing process, shorter piercing times, reduced splatter, minimized deformation at piercing point Safety: - CE marking - Light barriers - Multi-chamber extraction system - Compact extraction system Hedoxmu Sropfx Afponu

Condition: ready for operation (used), Year of construction: 2011, operating hours: 30,000 h, General Data Measurements width 2800 mm Measurements depth 7800 mm Measurements height 2900 mm Machine weight 10400 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Main Drive Number of axis 2 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 75 mm Workpiece weight 720 kg Max Material Thickness Aluminium 6.0 mm Hnjdpfowfiixjx Afpju This TRUMPF TruLaser 1030 was manufactured in 2011. A reliable CO2 laser cutting machine, it offers precision in cutting a variety of materials. Ideal for those looking to enhance their cutting capabilities. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand SIEMENS Model 840D Hedsxn U Ezspfx Afpjnu Additional Equipment HERDING Fume extraction in working area: 2000 Nm3/h Cooling unit Automatic sliding door "CE" Automatic two-level redundant working range protection "CE" This TRUMPF TruLaser Cell 7040 was manufactured in 2015. It features a large working range with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 4000 Watt CO2 laser, it excels in both thin and thick material cutting. Additional features include CNC automatic scanning, height detection, and a Siemens 840D control system. Consider the opportunity to buy this TRUMPF TruLaser Cell 7040 CO2 laser cutting machine. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand TRUMPF Hsdpfx Afsxg Uk Uspjnu This TRUMPF TruLaser 8000 was manufactured in 2012. A CO2 laser cutting machine featuring dual 3.6 kW power and a large working area of 2500x8000 mm. Consider the opportunity to buy this TRUMPF TruLaser 8000 CO2 laser cutting machine. Contact us for more information. Application Types Cutting

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand TRUMPF This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information. Application Types Cutting Hnjdpfoxg Uk Isx Afpju

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand TRUMPF Main Drive Laser power 5000 W This TRUMPF TruLaser 5030 classic was manufactured in 2006. It features a 5kW power capacity. Notably, it includes a Liftmaster and an extra Liftmaster for spares. This machine is ideal for those looking to get high-quality laser cutting capabilities. Contact us for more information about this machine. Application Types Hodpfjxgwbvjx Afpjnu Cutting

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,843 h, Main Drive Number of axis 3 Additional Equipment Hnsdpfx Asxgwctjfpsu Resonator: 4kW Co2 This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2014, Main Drive Hsdpfxjxgwcgj Afpsnu Number of axis 3 This 3-axis TRUMPF TruLaser 3030 Fiber was manufactured in 2014. It features a 3.0 kW fiber resonator and handles a maximum sheet size of 3000x1500. Ideal for precise fiber laser cutting, consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber laser cutting machine. Contact us for more information. Application Types Cutting