Used Trumpf Trumatic 6000 for sale (9)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
TRUMPF TruMatic 6000 TruMatic
Auction
Ends in
d
h
min
s
Auction ended
Nordrhein-Westfalen
7,587 km
Laser punching machine
TrumpfTrumatic 6000-1600
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS
Format: Large format
Beam operating hours: 15,000 hours
Laser operating hours: 59,000 hours
EQUIPMENT
Sheetmaster
Toolmaster
Note: The machine will continue to be operational until 07/09/2026!
The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing):
TECHNICAL DETAILS
Travel range X-axis: 3,050 mm
Travel range Y-axis: 1,550 mm
Sheet thickness max.: 8 mm
Punching force max.: 180 kN
Cgodjza Urgjpfx Appju
Workpiece weight max.: 230 kg
Listing
Möglingen
7,941 km
Laser punching machine
TRUMPFTruMatic 6000 (K01G) 1600 3200 Watt
Call
Condition: good (used), functionality: fully functional, Year of construction: 2002, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment:
Machine
- Working area 3050 x 1550 mm
- Hi-Las high-pressure cutting
- Laser cutting head with 5'' lens
- Quick-change device for cutting head
- Programmable cutting gas selection/pressure adjustment
- Capacitive height control APC
- Function: ContourLas
- Slag cone detection
- Compact dust extractor
- Tank heater
Codpfjza Eyhsx Appogu
- Automatic tool changer with 19 stations (21 – clamping jaws)
- 2 clamping jaws
- Rotation of all tools
- NC-controlled digital, maintenance-free three-phase drives
- Automatic re-positioning
- Tool length compensation
- Rapid shutdown of the hydraulics
- Automatic shutdown
- Automatic indexing tables, each 500 x 500 mm
- Sensors for both indexing tables
- Punch slug extraction
- Forming capability
- Programmable punch tool lubrication
- Programmable pressure foot
- Adaptive stroke length control
- Safety devices
- RJ 45 network connection
- 3.5'' floppy disk drive
+ Laser TLF 3200
+ SortMaster Box incl. 4 containers
+ GripMaster, adjustable
+ Scissor lift table
+ Re-positioning cylinder
+ Rotoscanner
+ HZB SheetMaster
+ SortMaster Pallet
+ SheetMaster incl. C-frame
+ Modular suction plate
+ additional clamping jaws, total of 4
+ Chip conveyor with tilting container
+ Bulging detection
Listing
Möglingen
7,941 km
Laser punching machine
TRUMPFTruMatic 6000 (K01G) 1600 3200 Watt
Call
Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment:
Machine
- Working area 3050 x 1550 mm
- Hi-Las high-pressure cutting
- Cutting head quick-change system
- Programmable cutting gas selection/pressure adjustment
- Capacitive height control APC
- Function: ContourLas
- Slag cone detection
- Compact dust extraction system
- Tank heating
Cgodeza Eu Eopfx Appju
- Automatic tool changer with 19 stations (21 – clamping jaws)
- 2 clamping jaws
- Rotation of all tools
- NC-controlled, digitally operated, maintenance-free three-phase drives
- Automatic repositioning
- Tool length compensation
- Rapid shutdown of the hydraulics
- Automatic shutdown
- Automatic indexing slides, each 500 x 500 mm
- Sensors for both indexing slides
- Slug extraction
- Forming capability
- Programmable stamping tool lubrication
- Programmable clamping device
- Adaptive stroke length control
- Safety devices
- RJ 45 network connection
- 3.5'' floppy disk drive
+ 5'' cutting head
+ 9" cutting head
+ FocusLine
+ MultiTool function
+ Thread forming function
+ Signing/quick beading function
+ Deburring and rolling technology function
+ Softpunch function
+ Additional clamping jaw
+ Repositioning cylinder
+ Vibration-damped installation
+ Blow-out device for small parts
+ Chip conveyor with tilting container
Listing
Möglingen
7,942 km
Punching laser machine
TRUMPFTruMatic 6000 (K05M) 2700 Watt FMC
Call
Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm
Y working area max.: 1250 mm
Control system: Rexroth IndraMotion MTX (basic version)
Laser power: 2700 Watt
Standard Equipment
Cgjdpfxey Saqms Appsu
Machine
- Sturdy, easily accessible C-frame
- Coordinate guide system for high-precision machining
- Linear magazine with 23 tool stations and 2 clamps
- Maintenance-free three-phase drive motors
- Repositioning unit with programmable hold-down device
- Foot pedal for clamp closing
- Alignment pin (right inside)
- Ball tables
- 2 parts flaps 500 x 500 mm incl. sensor for parts ejection
- Two good parts containers
- NitroLine
- Focus Line
- FastLine
- FlyLine
- Slag cone detection
- Ejector cylinder for laser parts
TRUMPF Laser
- TruFlow 2000 laser with LensLine and optimized standby mode
- High-frequency excitation
- Cooling unit
- Laser control
- Enclosed beam guidance
- Fine filtration of compressed air for beam tube ventilation
Cutting Head
- Lens cutting head with 170 mm focal length
- Universal cutting head quick-change system UTI with bus connection
- ControlLine
Punching Station
- Electro-hydraulic punching head
- Rotatable mono-tool holder
- Tool length compensation
- Programmable hold-down device with manually adjustable holding force
- Stroke counter for punch and thread-forming
- Punch spray lubrication
- Punch slug extraction
- Measurement of fill level in punching console
- Level monitoring for thread-forming and tool lubrication
Control
- TRUMPF control based on Rexroth IndraMotion MTX
- Operating panel with 17" touch screen
- Integrated technology data
- Teleservice via internet
- Programmable cutting gas pressure
- Automatic shutdown incl. wake-up mode
- Program management
- Production scheduling
Data Transfer
- Network connection RJ45 and USB interface
Safety
- CE marking
- Two-beam light curtain
- Monitoring system for gas pressure, temperature, and cooling water
- Emergency stop
- Protection against stray radiation
- Compact extraction unit
+ Brush tables
+ Lowerable die
+ MultiTool function
+ Softpunch function
+ Marking function
+ Chip conveyor with tilting container
+ Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting
+ Die spray lubrication
+ Blow-off device for small parts
+ 1 pc. additional clamp
+ Smart Punch Monitoring (punch breakage monitoring)
+ Vibration-damped installation
+ Repositioning cylinder
+ Warping detection
+ Parts conveyor belt in punching area
+ Parts conveyor belt in laser area
+ GripMaster (2500x1250)
+ Scissor lift table
+ Scrap grid pallet
+ SheetMaster (2500x1250) (AK04)
+ Peeling system
+ Automatic clamp closing
+ HZP loading/unloading
+ TwinCarts loading station with toothed belt drive
+ TwinCarts unloading station with toothed belt drive
Listing
Möglingen
7,942 km
Laser punching machine
TRUMPFTruMatic 6000 (K06M) Fiber 3000 Watt FMC
Call
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm
Y Working area max.: 1250 mm
Control: IndraMotion MTX
Laser power: 3000 watts
Standard equipment:
Machine
- Coordinate guide for high-precision machining
- Stable, easily accessible C-frame
- Linear magazine with 21 tool positions and 4 clamps
- Drives with maintenance-free three-phase servo motors
- Repositioning device with programmable hold-down device
- Foot switch for clamp closing
- Ball tables
- 2 part flaps 500 mm x 500 mm
- FocusLine
- NitroLine
- FastLine
- Ejection cylinder for laser parts
- Slag cone detection
TRUMPF laser
- TruDisk 3001 solid-state laser with 1 LLK outlet
- Excitation via pump diodes
- LLK according to standard layout (10m)
- TruControl laser control 1000
- Cooling unit
- Laser logbook function
Cutting head
- Solid-state laser compact cutting unit
- ControlLine
Punching head
- Electro-hydraulic punching head
- Rotatable mono tool holder
- Tool length compensation
- Programmable hold-down device (active / passive / repositioning)
- Punch stroke counter and thread stroke counter
- Spray lubrication of punch
- Punch slug extraction
- Calculation of filling level in the punching console
- Level monitoring of thread forming and tool lubrication
Control
Cedpfxsy Samuj Appsgu
- Open control based on Rexroth IndraMotion MTX
- Control panel with 17" touch control panel
- Program management
- Production plan
- Integrated technology data
- Teleservice via Internet
- Programmable cutting gas pressure
- Automatic switch-off with wake-up mode
Data transfer
- USB interface
- RJ-45 network connection
Safety
- CE marking
- Two-beam light barriers
- Monitoring system for, among others Gas pressure, temperature, cooling water
- Quick shutdown hydraulics
- Protection against scattered radiation
- Compact dust extraction system
- MultiTool function
- MultiBend function
- Thread forming function
- Engraving function
- Deburring and rolling technology function
- SoftPunch function
- StripLine
- Lowerable die
- Spray lubrication die including level monitoring
- Additional clamping claw
- 4 pcs. Height-adjustable clamping claws
- Vibration-damped installation
- Chip conveyor with tilting container
- Blow-out device for small parts
- Warping detection
SheetMaster
- Unloading platform
- Suction frame with 36 suction cups
- Peeling suction cup
- Vacuum sensors for each suction cup
- Double sheet detector for double sheet control
- Central lubrication
- TRUMPF control based on Rexroth IndraMotion MTX
- Automatic clamp closing machine
- Loading and unloading parallel to production time
- Peeling system including positioning aid medium format (2500x1250)
- First additional suction cup package standard
- Second additional suction cup package standard
- Unloading monitoring laser parts
GripMaster
- Parts conveyor belt punching station
- Parts conveyor belt laser station
ToolMaster with 70 stations (only for punching operation)
- ToolMaster set-up parallel to production time
Discover more used machines
Auction
Auction ended
Rheinland-Pfalz
7,798 km
Laser punching machine
TRUMPFTruMatic 6000 Y 1300
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,817 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, punching force: 22 t, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Cgjdpfoy Iz H Ijx Appju
Laser power: 3,200 W
Laser model: High-frequency excited CO2 laser TLF 3200W
Press force: 22 t
X-axis travel: 2,585 mm
Y-axis travel: 1,280 mm
MACHINE DETAILS
Control system: Siemens Sinumerik 840 D
Laser beam hours: 13,817 h
Laser on hours: 71,637 h
Operating hours: 80,188 h
EQUIPMENT
- Sturdy C-frame
- Linear guide with integrated magazine
- Maintenance-free three-phase servo motors
- Programmable hold-down for repositioning
- Sensor-monitored part chute 500x500 mm for punching and laser station
- Ejector cylinder at the laser chute
- Programmable cutting gas pressure control
- Laser cutting head: 5'' lens, quick-change system, height control
- Multi-beam light barriers
- Quick shut-off hydraulics
- Extraction system
- Compact dust extractor
- Protective device against stray radiation at the cutting head
- Brush table
- Sign function / rapid beading
- Softpunch
- Small parts blow-out device
- Repositioning cylinder
- Warp detection
- Chip conveyor
Listing
Borken
7,623 km
Laser and punching machine
TRUMPFTruMatic TC 6000 L 1300
Call
Condition: excellent (used), Trumpf
Here we offer a laser and punching machine.
Technical data:
Network: 400V/50 Hz
Fuse: 3 x 100 A
Connection power 65 kVA
Working area X x Y without repositioning
Combined operation 2585 x 1280 mm
Punching operation 2585 x 1370 mm
Laser operation 2585 x 1280 mm
Power:
Laser 2000 W
Maximum sheet thickness 8mm
Maximum punching force (including 20 kN hold-down device) 220 kN
Active hold-down device (programmable in stages) 4.5-20 kN
Maximum workpiece weight 200 kg
Maximum clearance height
In punching operation 35mm
1m laser operation 22mm
Speeds:
X-axis 90 m/min
Y-axis 60 m/min
Simultaneous Stroke sequence
Punching 900 min
Signing 2800 min
C-axis
Punching 60 revolutions/min
Thread forming 330 revolutions/min
Tools
Tool positions on the linear magazine 19 with 2 clamps
Number of tools when using multitool 19 to 190 tools
Rotation of all tools 360°
Tool change time 1.5-5 s
Maximum punching diameter
Single stroke 76.2 mm on all tool positions
Standard multicut 200mm
Maximum bending height 25mm
Maximum part size 500 x 500 mm
Accuracy:
Position deviation ± 0.1 mm
Average position spread ±0.03 mm
TRUMPF CNC control: Basis: Siemens SINUMERIK 840D
Type: TC 6000 L 1300
Loading and dismantling must be carried out by the buyer!
Condition: used
Cedem Ak Hujpfx Appogu
Scope of delivery: (see picture)
(Changes and errors in the technical data, information are subject to change!)
We will be happy to answer any further questions you may have over the phone.
Auction
Auction ended
Baden-Württemberg
7,955 km
Laser Punch Press
TRUMPFTruMatic 6000 L
Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table.
SheetMaster: not only loads and unloads the machine, it also sorts the parts
the parts reliably
ToolMaster: automatically changes the tools quickly, safely and conveniently
GripMaster: reliably moves residual grids and strips
TECHNICAL DETAILS
working area: 2585 x 1280 mm
Control: Siemens Sinumerik 840 D
Codpfx Apsn Nxw Djpsgu
laser power: 3200 watt
sheet thickness mild steel: max. 8 mm
sheet thickness stainless steel: max. 8 mm
sheet thickness aluminum: max. 4 mm
workpiece weight: max. 200 kg
Accuracy: +/- 0.1 mm
Punching force: 22 t
punching diameter: max. 76,2 mm
C-axis punching: 330 rpm
stroke sequence: 450 - 1000 1/min
stroke sequence marking: 2800 1/min
MACHINE DETAILS
Laser switch-on time: 46,547 h
cutting time: 23.580 h
length: 7500 mm
width: 8100 mm
height: 2400 mm
Weight: 16000 kg (basic machine)
Operating voltage: 400 V / 50 Hz
Connected load: 76 kVA
Auction
Auction ended
Bayern
8,038 km
Laser Punch Press
TRUMPFTruMatic 6000 L - 1600
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS
Combined punching/laser operation: 2,585 x 1,650 mm
Punching mode: 3,085 x 1,740 mm
Laser operation: 3,085 x 1,650 mm
Outputs
Laser power: 140 - 2,700 W
Maximum sheet thickness: 8 mm
Cutting capacity for mild steel: 8 mm
Cutting capacity for aluminum: 4 mm
Cutting capacity for stainless steel: 6 mm
Maximum punching force: 220 kN
Active hold-down device (programmable in stages): 4.5 - 20 kN
Maximum workpiece weight: 230 kg
Speeds
Maximum positioning speed X-axis: 90 m/min
Y-axis: 60 m/min
Simultaneous (X and Y): 108 m/min
C-axis punching: 60 revolutions/min
Thread forming: 180 revolutions/min
Punching stroke sequence (E = 1): 900 1/min
Marking: 2,800 1/min
Tools
Linear magazine: 18 tools with 3 clamps
Tool change time: 1.5 - 5 s
Tool accuracy
Position deviation: ±0.10 mm
Average position spread: ±0.03 mm
Programmable slides for punched and laser parts (max.)
Size: 500 x 500 mm
TRUMPF CNC control: based on Siemens Sinumerik 840D
MACHINE DETAILS
Laser switch-on time: 72,918 h
Cutting time: 18,536 h
Space requirement (width x length): 7,900 x 9,100 mm
Height: 2,400 mm
Weight: 22,500 kg
Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h
Cgsdpfx Apow Suwyepeu
Connected load: 73 kVA
We make it easier for you to find: "trumpf trumatic 6000"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Trumpf Trumatic 6000 (9)
Search Used-Machines now with more than 200,000 used machines:Browse through the most popular machine descriptions:
- Trumpf Beo D70
- Trumpf Laser Cutting Machine
- Trumpf Liftmaster
- Trumpf Loadmaster
- Trumpf Press Brake
- Trumpf Truarc Weld 1000
- Trumpf Trubend Cell 5000
- Trumpf Trubend Center 7030
- Trumpf Trulaser 1030









































































