Used Vitap Point 2 for sale (27)

Condition: like new (used), Year of construction: 2018, Number of independent vertical spindles: 8 Number of horizontal X-axis spindles: (2+2) No. of horizontal Y-axis spindles: (1+1) No. 1 blade for channel execution on the back of the cabinet: (ø 100 mm) Max. panel thickness: 50 mm Control: Full Parametric Max panel weight: 25 kg Max panel dimensions (see layout) : X ,Y 920, Z 50 mm Min panel dimensions: X 270,Y 150 (70 op.), Z 12mm Numbers of controlled axes: 3 Panel feed rate: 25m/min Spindle rotation: 3600 rpm Operating pressure: 7 bar Suction mouth diameter: ø 120 mm Suction rate: (2000 mc/hour) - (30 m/s) Pelhcdwjuxmvze Dsgk Max depth of all horizontal drilling in X and Y: 30 mm Max drilling depth in vertical: 45 mm Max horizontal drill bit diameter: 12 mm Max vertical drill bit diameter: 35 mm Motor: 1.5 kw Dimensions: 2200x1350x1550 mm Weight: kg 715 CE standards

Condition: like new (used), Year of construction: 2019, I sell the horizontal throughfeed CNC working centre Vitap Point K2 2.0, Year 2019. Configuration: 1 pc. milling spindle 5,0 KW 12 + 4 + 4 pcs. drilling units 1 pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Workpiece max. dimension - x 1250 x 50 mm Workpiece min. dimensions 270/400 x 185 x 4 mm Total area covered: 2900 x 1650 mm Total weight: 950 kg. With full documentation and CE. Very good condition. Available immediately. Pjlhcdjvx Dz Dew Djgk

Condition: good (used), Vitap automatic through-hole drilling machine 4 lower heads 2 horizontal heads Polhcdwon Hq Snj Djgk

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Pgolhcswgb Hxodw Dok Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Code: 0044 Brand: VITAP - ITALY Model: QUARTZ 5.6 Automatic edge bander with grinding unit for wood, pvc, abs, veneer, solid wood edges for joinery, furniture, custom furniture, kitchens, bathroom furniture, doors, panels and various - CE Standard - Year 2015 Technical data: Min/max panel height mm 10/60 Edge thickness mm 5 Min panel width mm 100 Min panel length mm 140 Pgslhowf N R Ascdw Djk Feed speed mt/min 11 Composition: Grinding unit with 2 cutters for precise panel grinding Gluing unit - Glue tank capacity kg 1,5 - Absorbed power Kw 3,5 End cutting unit with 2 blades - Blades rotation speed rpm 12000 - Blades diameter mm 80 F 22 Upper and lower trimming unit - Cutters mm 70 x 50 F25 Edge scraper unit - Knives 15 x 14 x 2 mm Free space for possible unit Suction ports N° 2 diameter mm 120 Compressed air 6 bar Overall dimensions mm 3100 x 850 x 1500 h Weight kg 700

Condition: used, Vitap Alfa35T dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction and for precise joints in interior design. It includes a stop for miter joints. drilling spindles: 35 division: 32 mm Spindle distance: max. 1,090 mm drilling depth: adjustable up to approx. 65 mm Pgolhcowdul Nedw Djk Pivot: pneumatic

Condition: used, Year of construction: 2010, Functionality: fully functional, Vitap Sigma 2T Multi support drilling machine - Working dimensions X-Y-Z (mm) 2500-1200-80; - Vertical drilling Spindles - 5 pcs.; - Vertical drilling spindles 0-90 turn; - Number of Vertical drilling spindles on one console 11+11; - Horizontal drilling spindles Left/Right sides; Pgslhcdwjv Idp Tj Dsk - Number of horizontal drilling spindles - 22 - Number of belt conveyor - 2 - Number of pressure top beam - 3 - Extra drill heads for hinges

Year of construction: 1999, Condition: used, Functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Pelhceiffpxsdw Djgk Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg

Condition: new, Year of construction: 2020, Machine type K2 2.0, new machine, as new, the machine bears the CE label, automatic, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 150/1250 mm, working height 3/50 mm, working length 270/5000 mm, feed speed 25 m. per minute, motor size 5 kW, with 4 tool holders, tool mountings: ISO30, blade diameter 100 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm.. Pgolheh I Nd Sscdw Dek +Machine is also bought with software for TPA codes +Licens for programming on external PC

Condition: excellent (used), Year of construction: 2011, Number of spindles : 21 Distance between spindles : 32mm ( CC ) Number of pneumatic clamps : 2 Working : 90/45/180 degree angle Pgolov Ia Acshcdw Djk Activate by foot pedal Loose chucks/drills included

Condition: good (used), Code: 0097 Brand: VITAP Pelhcdjwc Nmljw Djgk Model: ALFA 35 T - Norme CE Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1454 x 590 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Fence for 45 degrees frames Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1140 h Weight kg 454

Condition: used, Vitap Alfa35T dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction and for precise joints in interior design. drilling spindles: 35 division: 32 mm Spindle distance: max. 1,090 mm Pgslhcdewdulcew Dek drilling depth: adjustable up to approx. 65 mm Pivot: pneumatic

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system Pgjlhov H E S Tecdw Djk Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Application Types Edge Banding

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Pgelet H Twyshcdw Dsk

Condition: new, Year of construction: 2021, Machine type K2 2.0, new machine, the machine bears the CE label, automatic, with CNC control, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 1250 mm, working height 50 mm, working length 6000 mm, motor size 5 kW, the machine's motors are rated at 400 volts, motor rpm 1200/2400 per min., with 4 tool holders, tool mountings: ISO30, feed speed 25 m. per minute, tool diameter max. 35 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm., air consumption: min. 7 atmospheric pressure, complete with some accessories. Polhcdjh Izk Uew Djgk

Condition: excellent (used), 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm magazine feeding manual regulation of units span rotated heads Pelhcjh D Rvhedw Djgk pneumatic top pressure drilling depth regulation

Year of construction: 1999, Condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Pgslhcsh Txmtsdw Dek Depth adjustment from 0 to 80 mm

Condition: as good as new (ex-display), Year of construction: 2023, ECLIPSE PRO SEMI-AUTOMATIC EDGEBANDER AND TRIMMER FOR CURVED (CONCAVE AND CONVEX) AND STRAIGHT WORKPIECES For small and large panels with thicknesses from 10 to 60 mm and edgebanding from 1 to 3 mm, consisting of two units: TECHNICAL FEATURES : Part and edge characteristics : Minimum/maximum part dimensions Pgjlhcdjtzwybjw Djk Round parts Min. Ø 300 Max. Ø 2700 mm Part thickness 10 to 60 mm Minimum radius depending on edge thickness Edge thickness 1 mm R= 30 mm Edge thickness 2 mm R= 50 mm Edge thickness 3 mm R= 80 mm Machine dimensions Dimensions in height 2000 x 2000 x 1700 Dimensions with arm 3400 x 3400 x 1700 Weight 600 kg Suction 1 x Ø 80 mm 1- GLUING UNIT : - Gluing on small or large open or closed edge lines (oculus) - Glue pan quick-release system - 1 kg capacity EVA Teflon glue pot - 1 gluing roller - 2 rollers for copying panel shape - 3 x 500 W heating elements with electronic temperature control and regulation. - Manual regulation of glue quantity. - Automatic edge trimming system at the start of the gluing operation. - Reinforced workpiece support arm (common to trimming unit). -Leveling wheel with pneumatic lowering. Pedal and laser slow-down system with potentiometer (for small radii) - 7" color touch screen - Work surface for small parts. - Coil-type edge-holding table on three feet. - Ø 200 mm rotating holding plate with vacuum pump - On/Off automatic part feeder. - Encoder-controlled automatic coil edge-cutting shears for connecting the two edge ends on closed-curve panels. - Three processing options for closed parts: New LASER device for precision edge trimming to join closed parts. Encoder for overlapping, cutting and heating the edge. (Manual jointing) 2- RETRACTABLE TRIMMING UNIT : - 2 high-frequency 15000 RPM 0.5 Kw motors with top, bottom and front copying. - New trimming unit front copying adjustment system (located externally). - On/Off trimming unit - Pneumatic opening of both motors to facilitate part insertion. - 1 Set of 2 R=3, Z=6 welded carbide milling cutters Work surface for small parts. (Retractable shelf) Reinforced workpiece support arm (common to gluing unit) - Pneumatically retractable trimming unit for gluing the edges of large parts (clears the area). OPTIONS INCLUDED : 109462 Automatic glue feeder with laser sensor 109473 Wide-shouldered drive roller for better adhesion 109474 Additional bottom roller with support for better adhesion 109478 Round work surface, diameter 125 mm 109475 Rectangular table (800 x 360) for large parts

Year of construction: 2023, Condition: ready for operation (used), Main Drive Spindle speed range 3600 RPM Spindle motor power 5 kW Tool taper ISO30 Number of axis 3 Workpiece Workpiece X 270 mm Workpiece Y 1250 mm Workpiece Z 50 mm Workpiece weight 40 kg Additional Equipment 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parametric tools, and parametric setup Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming Import of DXF files CE compliant Main Drive Spindle speed range 3600 RPM Spindle motor power 5 kW Tool taper ISO30 Number of axis 3 Workpiece Workpiece X 270 mm Workpiece Y 1250 mm Workpiece Z 50 mm Workpiece weight 40 kg Additional Equipment Pslhcdwevzuq Io Dsgk 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parametric tools, and parametric setup Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming Import of DXF files CE compliant This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, Dowel drilling machine Make Vitap Type Forma 63 H year 2000 with 3 units 2x bottom 1 x lateral with 21 spindles Pgslhcdouf Dmujw Djk Pneumatic

Condition: ready for operation (used), Technical characteristics Semi-automatic 13-spindle multi-spindle drilling machine Distance between chucks : 32 mm Center distance between first and last chuck : 384 mm Max. drilling depth : 75 mm Spindle speed : 2800 rpm Cast-iron table 600 x 400 mm Max. workpiece dimensions : 600 x 3000 mm 1.5 hp motor 1 vertical pneumatic presser Cycle start with foot pedal Operating pressure 6 bars Power and Motors Voltage: 380 V Pluging: Three-phased Power: 2 Kw Motor: 1,5 CV Overall dimensions Lenght: 750 mm Width: 560 mm Height: 1200 mm Weight: 160 Kg Pgolhcsttdm Dedw Djk

Condition: excellent (used), bottom heads 2x 22 spindles side head 21 spindles spindles span 32mm Pgelhcjhq Tyiedw Dek 3 pneumatic clamps pneumatic setting of heads working dimensions 2400x1200mm

Condition: used, Year of construction: 2010, Drill and dowel inserting machine 1 pcs drilling unit diameter 6 mm 1 pcs drillingunit diameter 8-10 mm 1 pcs dowel inserter dia 6 mm 1 pcs dowel inserter dia 8-10 mm 1 pcs kremlin gluepump (white glue) Pgjlhetq Ul Rscdw Dsk 1 pcs vibro feeder working width 1300 mm or pendelum left/right

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 601264, Technical specifications: -spindles 21 -center distance between spindles 32 mm -width of the drilling head 640 -maximum hole depth 70 -maximum dimensions of drilled parts 800x3000 Polhcdwetrn Ryo Dogk -spindle revolutions per minute 2800 -motor power 2 kW -normal pressure 6 - 8 bar -weight of machine 295 -machine size 1070x890x1240

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Pjlhotqq Hpjcdw Dogk Overall dimensions Lenght: 1142 mm Width: 800 mm Height: 1140 mm Weight: 300 Kg