Used Haas Vf-2 for sale (14)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,104 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 8,100 rpm, number of axes: 3, This 3-axis HAAS VF-2 was manufactured in 2017. It features an X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2 vertical machining centre we have for sale. Contact us for further details. Nsdpfx Aozh Hf Tebzocw

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Ncedpfx Absx Up Dhezew Machine weight: 3,629 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in good technical condition, and an inspection while running can be arranged. Includes a 4th axis. Work area and table: Njdpfeznx Nwox Abzocw Table dimensions: 914 × 356 mm Travel in the X-axis: 762 mm Travel in the Y-axis: 406 mm Travel in the Z-axis: 508 mm Distance from the spindle nose to the table: 102 to 610 mm Maximum table load: 680 kg Spindle (Super Speed specification) Spindle taper: ISO 40 (Inline Direct-Drive) Maximum spindle speed: 12,000 rpm Spindle motor power: 22.4 kW (30 HP) Torque: 122 Nm at 2000 rpm Tool changer (ATC) Changer type: Rapid side-mount tool changer Changer capacity: 24+1 positions (optionally 30+1) Tool change time (tool-to-tool): approx. 1.8 seconds Feeds and drives Rapid traverse rates in X, Y, and Z axes: 35.6 m/min (compared to 25.4 m/min for the standard VF-2 version) Maximum working feed rate: 21.2 m/min Guide type: Linear ball bearings in all axes Dimensions and weight Machine footprint (W × D × H): approx. 2.51 × 2.36 × 2.57 m (height depends on the Z-axis elevation) Machine weight: approximately 3,540 kg

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3s HAAS VF-2SSYT CNC Vertical Machining Center manufactured in 2024 features a maximum spindle speed of 12,000 rpm and a robust tool changer with a capacity of 30+1 tools. The machine has been lightly used and is in excellent condition, offering travels of 762 mm in the X-axis and 508 mm in both Y and Z axes. Consider the opportunity to buy this HAAS VF-2SSYT vertical machining center. Contact us for further details. • Spindle nose to table (max/min): 610 / 102 mm • Table: • Size: 914 x 457 mm • T-slots: 3 • T-slot width: 15.9–16 mm Njdpfxsykrz Hj Abzecw • T-slot center distance: 125 mm • Spindle: • Max torque: 122 Nm @ 2000 rpm • Drive: Inline Direct-Drive • Taper: CT40 / BT40 / HSK-A63 (depending on configuration) • Bearing lubrication: Air/Oil injection • Tool changer: • Type: SMTC • Capacity: 30+1 tools • Max tool diameter: 64 mm (127 mm with adjacent pocket empty) • Max tool length: 279 mm • Tool-to-tool: 1.8 s • Chip-to-chip: 2.4 s • Feedrates: • Max cutting feed: 21.2 m/min • Rapids (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Axis motors (thrust): • X: 8,874 N • Y: 8,874 N • Z: 13,723 N • Electrical: • Input voltage (low): 220 VAC, 70 A full load • Input voltage (high): 440 VAC, 35 A full load • Coolant: Capacity 208 L • Air requirements: • Air required: 113 L/min @ 6.9 bar • Minimum pressure: 5.5 bar • 4th-axis ready Additional equipment • Mist/vapor extraction system • Automatic water and oil dosing system for coolant • Integrated coolant oil separator • Renishaw probe system • 2 vises • Complete set of high-quality toolholders, end mills, and drills

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, overall weight: 3,500 kg, spindle speed (max.): 8,100 rpm, number of axes: 3, This 3-axis HAAS VF-2YT was manufactured in 2015. It features an X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a table size of 914 x 457 mm and a spindle speed of 8,100 RPM. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2YT vertical machining centre we have for sale. Contact us for further details. • Table size: 36" × 18" (914 × 457 mm) • Spindle taper: CT40 • Spindle motor: 30 hp Ncodpfx Absza Umkjzew • Tool changer: 40 ATC • Rapid traverse (X/Y/Z): 1000 ipm • Preparedness: 4th axis drive pre-wired; prepared for 4th/5th axis integration • Notes: Optional direct-drive spindle and high-torque gearbox mentioned as available options (to be confirmed if included) Additional equipment • High-pressure through-spindle coolant (1000 psi) • High-pressure flood coolant • Multi-auger chip removal system • 95-gallon coolant tank

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 27508, HAAS VF-2D High Speed Vertical Machining Center Manufacturer: HAAS Model: VF-2D Year: 2002 Serial No.: 27508 Country of Origin: USA Travels X-axis: 400 mm Y-axis: 330 mm Z-axis: 200 mm Table Table Size: 600 × 330 mm Spindle Spindle Speed: 40,000 rpm Tool Holder: HSK-E25 Tool Changer ATC Capacity: 20 Tools Electrical Specification Voltage: 208/230 V Phase: 3 Phase Ncedpfx Abezbww Ijzew Frequency: 50/60 Hz Owned by Samsung Electronic's first tier supplier very good condition Two equivalent machines available together.

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Ncsdpfx Aov Tah Aobzsw Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Nedexwyuaopfx Abzocw Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 3700 kg Measurements height 2800 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Tool taper BT 40 Number of axis 4 Dimensions Machine Length 2700 mm Table Table load 680 kg Movement Ncjdox D D N Iepfx Abzsw X-Axis Movement 762 mm Z-Axis Movement 508 mm Y-Axis Movement 406 mm Tools Max weight 5 kg This 4-axis HAAS VF-2SS-EU vertical machining center was manufactured in 2018. It features a 762 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. Equipped with a BT-40 spindle achieving up to 12,000 rpm and a side-mount tool changer with a 30 + 1 tool capacity. Rapid traverse rates reach 35.6 m/min. Consider the opportunity to buy this HAAS VF-2SS-EU vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Tool changer: 50+1 tool changer • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets • 21 bar trough spindle • 15" screen Njdpfxsx Hbluj Abzscw Extra Information Machine still under power

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: 1106086, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 356 mm, table length: 914 mm, The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Paths X-axis travel: 762 mm Y-axis travel: 406 mm Nsdpjw Axkyefx Abzjcw Z-axis travel: 508 mm Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rates Rapid traverse: 35.6 m/min MACHINE DETAILS Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum load: 70 A Short-circuit interrupting capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetric Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm EQUIPMENT Key switch for program lock Synchronized thread tapping 208-liter coolant system with continuous coolant supply 15" color LCD monitor with USB port

Condition: good (used), Year of construction: 2011, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Ncodpfx Aoyq Ipgebzsw

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40164, controller manufacturer: HAAS/FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Spindle speed: 12,000 rpm MACHINE DETAILS Ncodpfx Ajxuih Rsbzjw Control: HAAS/FANUC Electrical data Voltage: 360/480 V Phases: 3 Frequency: 50/60 Hz Full load: 40 A Maximum load: 70 A EQUIPMENT 24-position tool changer BT40 Belt filter system / high-pressure pump KNOLL KF 150

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Ncodpfewx I N Dox Abzsw Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger