Used Weber Extruder for sale (108)

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Nsdpfx Aoxpu Tbjc Tjcu

Condition: used, mileage: 1 km, power: 9 kW (12.24 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 587 kg Please contact Emal Jaweed for more information Nsdpsx R T Icsfx Ac Tjcu

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm Ncsdoid Sgmspfx Ac Tsu outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm Ncsdpfsdx Ryyox Ac Teu coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt Ncsdexf Up Uspfx Ac Tsu - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: like new (used), Quantity: 2 Ncedpfot H Rrzox Ac Tou 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Location: Pirmasens We will be happy to send you further information on request.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 8315, grinding width: 1,100 mm, grinding height: 150 mm, power: 15 kW (20.39 HP), grinding belt length: 2,500 mm, workpiece height (max.): 150 mm, Working width 1100 mm 1. Contact roller drive 15 kW 2. Sanding pad drive 11 kW 3. Brush roller for cleaning the workpiece Belt length 2500 mm – prevents heating of the glue joint and avoids it becoming "smudgy" Workpiece thickness max. 150 mm – min. 4 mm Continuously variable feed Ncodpfxew Hplco Ac Teu Digital table height display Year of manufacture: 1984 Can be tested under power – fully connected Robust, heavy-duty design for solid wood panels (also suitable for heavy stock removal) Existing extraction pipes can be included in the auction Connection cable, length 25 m, is also included Suitable sanding belts available, grits 80 + 120 Complete documentation available Can be loaded with a forklift – transport securing and shipping are the responsibility of the buyer

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Nsdpfx Acsif Rvaj Tocu