Used Weber Extruder for sale (101)

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Hobwex Apckoxtbcjnr

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Hsbwxtjzrt Enobcjnr Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Serial no.: 063.008271.r.1004 Screw diameter: 2 x 63 mm Screw length: 17 x D Condition: used

Condition: like new (used), Extruder hose sections for Weber DS 10.22. Hnebwxtbohlvm Njcjr

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Hnsbeyx Dw Dswxtbcsr Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Type: DS 8.7 Hobwxtszuk Hbebcsnr Serial number: DS 85 777 Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Screw diameter: 87 mm Connected load: 90 kW

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N Hsbwsyimqwoxtbcjnr If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, A complete Weber slicing and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2006. 2) Weber SCA scanning unit, year of manufacture: 2006. 3) Weber MCS 902 slicer, year of manufacture: 2006, product cross section X/Y: 380mm/125mm, max. product length: 1600mm, slice thickness range: 0.1mm-50mm. 4) Weber inspection and reject unit. 5) Weber transfer station. 6) CFS PowerPak 620, year of manufacture: 2005, film width range: 320mm-700mm, forming depth: 150mm. 7) 2x ELS OP2-SL6215-SMSK302 cross web labeling stations. 8) Videojet Excel 273se printer station. 9) Bizerba MD-SA-F1160/500/200 tunnel metal detector. This is a complete line including an edge trim unit and rewind station. Documentation available. An on-site inspection is possible. Hobwxtbjzli Ufecenr

Condition: ready for operation (used), Year of construction: 2013, A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible. Hnobwxezli T Istbcor

Condition: ready for operation (used), Year of construction: 2007, A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible. Hnjbszli T Uowxtbcor

Condition: ready for operation (used), Year of construction: 2006, A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Hebwxtezli Ulebcjnr

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Hobwxtbjyx H E Decenr

Condition: as good as new (ex-display), All parts from picture come with machine. Hnebwxtbegrafkocer

Condition: ready for operation (used), Year of construction: 2016, A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible. Hnsbwxtbezp Rgqocor

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely robust mechanical design and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical specifications (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: 08/2000 Electrical connection: 380 V (CEE plug included) Pneumatic connection: 6 bar Hnobwxtezni Rxobcor "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, power: 20 kW (27.19 HP), Year of construction: 2020, operating hours: 143 h, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Weber TRC 86 - Compaction Roller - Year of manufacture: 2020 - with wireless remote control - 143 operating hours Price: €14,890.00 net / €17,719.10 gross Operating weight according to CECE: 1,390 kg Tire width: 854 mm Compaction force: 75 kN Frequency: 32 Hz Amplitude: 1.70 mm Average static line load CECE: 9.80 kg/cm Gradeability: 50% (depending on the ground) Working/travel speed: m/min (depending on the ground) Drive system: hydrostatic, four tires Engine manufacturer/type: Lombardini LDW 1003 Engine type: 3-cylinder diesel, water-cooled Engine power, max.: 19.5 kW / 26.7 hp Engine power at operating speed: 15.6 kW / 21.3 hp at 2600 rpm The machine has a wireless remote control. The remote control is charged in the roller. Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. Hsbwoznrwhsxtbcjnr We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Unladen weight: 1,390 kg Please contact Marius Herden for further information.

Year of construction: 2022, condition: used, For inquiries regarding the machine, please contact Mr. Herden at [phone number]. Weber CR 9 MDM Hatz-Diesel Vibratory Plate / Year of Manufacture: 2022 / Electric Start / DEMO Unit Selling price: €9,990.00 net / €11,888.10 gross Technical Data Engine: Hatz Diesel Maximum engine power: 11.0 (15.0) kW/HP Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors of the CR series excel with high compaction performance and maximum efficiency. They are therefore the first choice for compaction work, from classic road and civil engineering to paving. Balanced running characteristics, high smoothness and low hand-arm vibration ensure a high level of operator comfort. - Precise, stepless, electro-hydraulic switching of forward and reverse direction via a touch switch - Engine protection - Throttle cable and hydraulic switching protected and routed in the guide rod - Low hand-arm vibration - Fatigue-free work with the height-adjustable hand guide rod - Protection of the machine and engine by means of a protective frame and complete engine cover - Reduced maintenance effort due to the self-tensioning centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable lifting eyes - Secure lashing for transport thanks to additional eyes in the engine console - Higher operator comfort thanks to electric start with operating hour counter, engine oil and battery voltage monitoring - Application areas: road and civil engineering, trench construction, garden and landscape construction, sub-base for paving, compaction of paving and compaction of sand, gravel or stone We have a very large selection of different vibratory plates in our warehouse, which are immediately available! Please contact us for this at [phone number] / [email address]. If desired, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. Hnebwsznrtpsxtbcsr We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Weber MT program! Errors and prior sale excepted! Internal No.: 080682 = Further information = New: Yes Unladen weight: 740 kg Engine brand: Hatz Please contact Marius Herden for further information.

Year of construction: 2022, condition: used, Weber CR 9 MDM Hatz Diesel Vibratory Plate / Year of Manufacture: 2022 / Electric Start / DEMO Unit Selling price: €9,990.00 net / €11,888.10 gross Technical data Engine: Hatz Diesel Engine power max.: 11.0 (15.0) kW/HP Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors in the CR series impress with their high compaction performance and maximum efficiency. For compaction work ranging from classic road and civil engineering to paving, they are therefore the first choice. Balanced running characteristics, high smoothness and low hand-arm vibration ensure a high level of operator comfort. - Precise, stepless, electro-hydraulic switching of forward and reverse operation via fingertip control - Engine protection - Throttle cable and hydraulic switching protected and routed in the guide rod - Low hand-arm vibration - Fatigue-free working with the height-adjustable handlebar - Protection of machine and engine by protective frame and complete engine fairing - Reduced maintenance effort due to the self-adjusting centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable lifting eye - Secure lashing for transport thanks to additional eyelets in the engine console - Increased operator comfort thanks to electric start with operating hour counter, engine oil and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, garden and landscape construction, sub-base for paving, compaction of paving and compaction of sand, gravel or stone We have a very large selection of different vibratory plates in our warehouse, which are immediately available! Please contact us for this at . If desired, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted! Internal No: 071417 = More information = Hobwjznrtijxtbconr New: Yes Unladen weight: 740 kg Engine brand: Hatz Please contact Marius Herden for further information.

Year of construction: 2022, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Weber CR 9 Hatz Diesel Vibratory Plate / Year of Manufacture: 2022 / Electric Start / DEMO - Unit Selling Price: €9,390.00 net / €11,174.10 gross Technical Data Hebweznrr Soxtbcjnr Engine: Hatz Diesel Maximum Engine Power: 11.0 (15.0) kW/hp Weight: 736 kg Centrifugal Force: 100 kN Frequency: 65 Hz Working Width: 75 cm The reversible soil compactors of the CR series excel with their high compaction performance and maximum efficiency. They are therefore the first choice for compaction work ranging from conventional road and civil engineering to paving. Balanced running characteristics, high running smoothness, and low hand-arm vibration ensure a high level of operator comfort. CR 9 - The new top-of-the-line model: powerful, robust, and reliable: - Precise, stepless, electro-hydraulic forward/reverse switching via a fingertip control - Throttle cable and hydraulic switching protected and routed in the guide rod - Low hand-arm vibration - Fatigue-free work with the height-adjustable handlebar - Protection of machine and engine through a protective frame and complete engine fairing - Reduced maintenance effort thanks to the self-adjusting centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and quick loading due to large, foldable crane eye - Secure lashing for transport thanks to additional eyelets in the engine console - Higher operator comfort through electric start with operating hour counter, engine oil, and battery voltage monitoring - Application areas: road and civil engineering, trench construction, gardening and landscaping, sub-base for paved areas, compacting paving stones, and compacting sand, gravel, or rubble We have a very large selection of different vibratory plates in our warehouse, which are immediately available! Please contact us at [phone number] / [email address] for this. Upon request, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted! Internal No.: 077554 = Further Information = New: Yes Unladen Weight: 736 kg Engine Brand: Hatz Please contact Marius Herden for further information.

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted Hnjbwxtboy T Ip Tocjr – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Hnobwxtsx Twcpobcor

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, spindle speed (max.): 5,500 rpm, number of slots in tool magazine: 240, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M2 was manufactured in 2011. It features a substantial X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 240 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Number of revolvers/magazines: 1 • Magazine capacity: 240 positions • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Rated voltage 3x 400 V • Frequency 50 1/s • Full load current 150 A • Rated current main drive 85 A • Connected load 80 kW 100 kVA • Operating voltage 400 V • Control voltage 24 DC • Frequency 50 Hz • Power 2.9 kW • Current 11.0 A • Refrigerant R134a • Filling quantity 3.0 kg Additional equipment • OPTIONAL: Tooling package (approx.): • Group 1: 700–750 tools (Ø up to 124.9 mm) • Group 2: 100–150 tools (Ø 125–224.9 mm) • Group 3: 50 tools (Ø 225–350 mm)Geometry readjusted (done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Hebwxezl S Uhjtbcjnr Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,713 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 50,000 W, number of slots in tool magazine: 144, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Hnebwxtbjzl S T Docer Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Number of revolvers/magazines: 1 • Magazine capacity: 144 positions • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Operating hours: 27713 h Additional equipment • OPTIONAL: Tooling package • Group 1: approx. 700–750 tools (Ø up to 124.9 mm) • Group 2: approx. 100–150 tools (Ø 125–224.9 mm) • Group 3: approx. 50 tools (Ø 225–350 mm)Recent replacement of the X-spindle and the rotary seal on the IKZ (internal cooling through spindle)Geometry readjusted(done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: used, boneless meat, sausage, cheese, or fish 400V, 50 Hz/3/N/PE 32A approx. 10 kW compressed air connection values: min. pressure 4 bar cutting system sickle blade: max. speed at blade head WSK 2,000 min-1 Hnjbwxtbjzkaavjcsr Drive: feed, cup, portioning unit CCU: servo motors Drive power transmission: toothed belts Feed power transmission: precision ball screw drive Cutting thickness: 0.1 to 100 mm (depending on product and cutting capacity) product passage width: adjustable up to max. 380 mm product passage height: adjustable from 125 to max. 180 mm (optionally up to 200 mm) programming: dialogue via touch screen program memory locations: 100 2 sickle blades total dimensions (L x W x H): ± 3,000 x 1,600 x 2,700 mm + "Wibotec" single-pan weighing scale Type Continuous checkweigher 200 - Web 99T 355 -365 Web Module Length: approx. 485 mm Width: approx. 535 mm Weight: approx. 150 kg Power transmission of the drives: gears 9 g - 3750 g + Monosorting rocker Type CCR Length: approx. 450 mm Width: approx. 380 mm Weight: 250 kg Drive power transmission: toothed belts Motor type: asynchronous motors or servo drives, depending on the slicer type + Conveyor belt Type CCE total dimensions (L x W x H): ± 4,100 x 960 x 1,500 mm drive power transmission: toothed belts motor type: asynchronous motors or servo drives

Condition: good (used), Year of construction: 2002, This line have slicer WEBER CCS 602 and packaging CFS 660. Parts shown by hand not come. Hsbwxtezlak Dsbcenr

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Hebwxsy Ickbjtbcsnr Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator