Used Yeong Chin Machinery Industries Co. Ltd. (Ycm) Tv188B for sale (130,675)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Hjdpfxsuiq Dhj Ai Tsw Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Hodpfxovy Aipj Ai Tew Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Hedpfx Aisxn Aage Tsw

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 0013, type of input current: three-phase, input voltage: 380 V, working height: 1,000 mm, total width: 885 mm, total length: 930 mm, total height: 1,630 mm, overall weight: 545 kg, insertion depth: 380 mm, Huen Chen HC-13TR4E Quadruple Automatic Riveting/Eyeleting Machine Heavy-duty automatic quadruple eyeleting machine, designed for the production of lever arch files and binders. Hjdpfx Aox Nfhlsi Tjw The machine sets four eyelets/rivets simultaneously in one working cycle. The material is positioned manually against the adjustable guides. Operation is activated by two microswitches on the working table, so no foot pedal is required. Pre-punching of the material is not necessary. The machine punches and sets the eyelets in one operation. Technical details: * Manufacturer: Huen Chen Enterprise Co. Ltd., Taiwan * Model: HC-13TR4E * Year: 1993 * Quadruple eyeleting/riveting system * Fixed spindle / eyelet spacing * Throat depth: 380 mm * Working height: approx. 1,000 mm * Motor: 1 HP * Power supply: 380 V, 3-phase, 50 Hz * Machine dimensions: approx. 930 × 885 × 1,630 mm * Net weight: approx. 545 kg * Intermittent motor operation * Two-microswitch workpiece activation The machine is complete with the installed tooling and a quantity of matching eyelets/rivets as shown in the photographs. The machine is in good used and fully functional condition and can be inspected while running at our warehouse in Son en Breugel, the Netherlands. IMPORTANTLY; this model is still part of Huen Chen's current product lineup!

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 Hsdpfew S Ewqjx Ai Tsw • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. Hedpfx Asykz Ebsi Tsw For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, controller manufacturer: Mitsubishi, Equipment: chip conveyor, documentation/manual, CNC-Drehmaschine Chuan Chay CT2-52YM mit Top Automazioni Stangenlader Baujahr: 2014 | Top gepflegt | Standort: Baden-Württemberg _____ Zum Verkauf steht eine sehr gepflegte und voll einsatzbereite CNC-Drehmaschine des Typs Chuan Chay CT2-52YM, ausgestattet mit einem automatischen Stangenlader von Top Automazioni. Die Maschine stammt aus einem Konzernbetrieb, in dem sie regelmäßig gewartet und sorgfältig gepflegt wurde. Sie befindet sich in technisch wie optisch sehr gutem Zustand und ist sofort verfügbar. _____ Technische Daten • Hersteller: Chuan Chay • Modell: CT2-52YM • Baujahr: 2014 • Steuerung: Mitsubishi • Max. Stangendurchlass: Ø 52 mm • Achsen: C-Achse & Y-Achse • Gegenspindel • Angetriebene Werkzeuge • Späneförderer & Teilefänger • Stangenlader: Top Automazioni • Standort: Baden-Württemberg _____ Zubehör • 16 Werkzeughalter für Außenbearbeitung • 12 angetriebene Werkzeuge • 10 Werkzeughalter für Innenbearbeitung • ca. 30 Spannzangen • 2 Spannzangenköpfe • 8 Greifer-Armbacken in verschiedenen Größen _____ Highlights • Sehr gepflegter Zustand • Laufend gewartet (bisher im Konzernbetrieb im Einsatz) • Sofort einsatzbereit • Optimal für Klein- und Mittelserien • Attraktive Komplettausstattung _____ Besichtigung nach Absprache möglich. Die Maschine ist ab sofort verfügbar. Hedpfx Aewg Dabei Tjw Transportorganisation und Verladung können auf Wunsch unterstützt werden. Bei Fragen oder Interesse freuen wir uns auf Ihre Kontaktaufnahme. _____ CNC Turning Machine Chuan Chay CT2-52YM with Top Automazioni Bar Feeder Year of Manufacture: 2014 | Excellent Condition | Location: Baden-Württemberg, Germany _____ We are offering for sale a well-maintained and fully operational CNC turning machine of the type Chuan Chay CT2-52YM, equipped with a Top Automazioni automatic bar feeder. The machine was previously operated in a corporate environment, where it was regularly serviced and carefully maintained. It is in very good technical and visual condition and is immediately available. _____ Technical Data • Manufacturer: Chuan Chay • Model: CT2-52YM • Year: 2014 • Control System: Mitsubishi • Max. Bar Capacity: Ø 52 mm • C-axis and Y-axis • Sub-spindle • Driven tools • Chip conveyor & parts catcher • Automatic bar feeder by Top Automazioni • Location: Baden-Württemberg, Germany _____ Included Accessories • 20 external turning tool holders • 12 driven tools • 10 internal turning tool holders • approx. 30 collets • 2 collet heads • 8 gripper arms in various sizes _____ Highlights • Excellent overall condition • Regularly serviced (previously operated in a corporate environment) • Ready for immediate use • Ideal for small and medium series production • Well-equipped with useful accessories _____ The machine is immediately available. Viewing can be arranged by appointment. Support with loading and transport logistics is available on request. We look forward to your inquiry and will be happy to provide further information.

Year of construction: 2026, condition: new, Stainless-steel cooling tunnel for rapidly and gradually cooling hot-filled products packaged in glass bottles, jars or cans. Controlled cooling helps preserve product quality and reduce the risk of thermal shock and container breakage. Containers travel through the tunnel while water spray nozzles cool them progressively. During this process, the water spray also cleans the exterior surfaces of the containers. Automatic temperature control and an integrated water chiller maintain a stable water temperature during operation. Features Hsdpfx Aoz Nd Imei Tow • Suitable for glass bottles, jars and cans • Gradual cooling by water spray nozzles • Integrated water chiller • Automatic temperature control • Manual and automatic operating modes • Integrated control panel with clear error messages • Adjustable conveyor speeds and automatic shutdown timers • Controls for inlet and outlet conveyors, the main tunnel conveyor, water-tank pumps and heating zones • Suitable for integration with conveyor systems The stainless-steel construction is suitable for hygienic food and beverage processing. The water-spray process cools the products while cleaning the outside of each container for a clean final package.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We are offering this very well-maintained machine for the production of paper cups (8oz), manufactured in 2017. Machine designation: Paper Cup Machine (8oz) Manufacturer: DAE SUNG HIGH TECH CO., LTD. Model: DSD-60A Serial number: 17-DS-0027_INTERPACK Year of manufacture: 2017 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. Hodoziau Dopfx Ai Tew If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We are offering this very well-maintained machine for the production of paper cups (12 oz), manufactured in 2018. Machine designation: Paper Cup Machine (12 oz) Manufacturer: DAE SUNG HIGH TECH CO., LTD. (Country: Korea) Model: DSD-60A Serial number: 18-DS-0045 Hodpfxszia U De Ai Tsw Year of manufacture: 2018 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press Hsdpfxey Uiyvo Ai Tew This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: like new (used), Single Flatbed Machine - Model Number CEL-FB3500-1900-1R To suit Ø1.8m Tanks Ring diameter – estimated 2300mm ID Hedpsn E S Idsfx Ai Tew Single Flatbed Machine - Model Number CEL-FB3600-1050-1R To suit the following tools Clarifier, Blower pot and Riser tool Or Welding Blocks, Green Lid and Blower box Ring diameters estimated at 1 x 1400mm ID

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit Hedpfx Asznwu Ssi Tjw - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Hsdpfx Aijza T Slj Tow Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Technical Specifications: Manufacturer: Thompson Meat Machinery. Model: 4200 M/M single-shaft mixer grinder. Serial Number: TMG.4200.259. Date of manufacture: 2002. Output capacity - up to 4,000 kg/h (depending on product). Hopper capacity - 390 litres. Mix capacity - up to 200 kg. Head size - #56. Supplied with various hole plates and other spare parts. Hedjzuzl Uepfx Ai Tew Motors: Voltage (V): 415 V (for all motors). Frequency (Hz): 50 Hz (for all motors). Total Ampage: 35.8 A.

Year of construction: 2002, condition: used, Grinding wheel dimensions: 455x305x229.6mm, grinding diameter: 2-50mm, length: 2,450mm, width: 2,100mm, height: 1,600mm, weight: 3.7t, operating hours: unknown, including documentation, tooling package and clamping devices, out of operation since 2023. On-site inspection is possible. Hedpez R A N Sefx Ai Tjw

Condition: refurbished (used), Lime Slaker Machine, GV-2, Continuous Lime Slaker, Quick Lime Slaker, Used Machine Manufacturer : Construction Machinery Enterprise - License Type : GV-2 Country of origin: Bulgaria Weight : 1,300 kg Capacity : Hedpszpxkqsfx Ai Tew For quick-slaking lime : 2 tonnes/hour For slow-slaking lime : 1.5 tonnes/hour Technical data : Drum speed : 10 rpm Electric motor : 8 kW, 68 rpm The machine structure and its components have been refurbished: Tank body and water jacket section, bearings, electric motor (new), machine frame. It has also received a new modern rotary joint on the water inlet side.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: A-250101, total length: 4,600 mm, total height: 1,800 mm, total width: 1,250 mm, input voltage: 230 V, overall weight: 650 kg, compressed air connection: 4 bar, warranty duration: 3 months, input current: 6 A, roll width: 680 mm, pipe diameter (max.): 76 mm, product height (max.): 120 mm, product height (min.): 25 mm, product length (max.): 550 mm, product length (min.): 100 mm, Item A250101 – Record Jaguar 88 Flow Pack Machine For sale: Used Record Jaguar 88 flow pack packaging machine. Product flow direction: Left to right Machine finish: Painted Machine Specifications: Overall machine length: 4.6 metres Machine width: 1.2 metres Overall machine height: 1.8 metres Working height: 0.85 metres Usable infeed conveyor length: 2.0 metres Usable outfeed conveyor length: 0.5 metres Flight distance: 400/800 mm Machine capacity: 3,600 packs per hour Machine Connections: Power supply: 230 V N + PE Connected load: 3.2 kW Plug type: CEEform, 5-pin, 16 A Compressed air: Yes (the machine can also operate without compressed air) Machine Features: Hedpfx Aijz Er Nve Tjw • Independent temperature control for the cross-sealing unit and longitudinal sealing rollers • 1 set of pulling rollers • 1 set of sealing rollers • 1 set of folding rollers for the longitudinal sealing seam • 1 set of sealing knives, 270 mm wide • Passage height of the cross-sealing unit: 150 mm • Safety coupling in the cross-sealing unit • Flight distance: 400/800 mm • Two-speed control of the flights • Fixed forming shoulder • Maximum film width: 600 mm • Top chain with flights • Mechanical film-length adjustment • Pneumatic product pushers • Mechanical adjustment of cross-sealing speed • Rotating control panel • Machine mounted on wheels for mobility, with adjustable feet • Electronic speed control via potentiometer • Additional 230 V socket • Equipped with a hot foil printer for printing the date on the film • Pneumatic opening and closing of the sealing rollers • Usable infeed conveyor length: 2,000 mm • Usable outfeed conveyor length: 500 mm • All parts that come into contact with the product are made of plastic or stainless steel The machine is particularly suitable for tall and/or long packages.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Hedswg Sgcspfx Ai Tjw Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP Hjdpfjzzp Epex Ai Tsw 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Hjdpfxex D Dihj Ai Tsw Capacity: 10 Ton Includes various tools The machine is in good working condition. Location: Hamont-Achel, Belgium The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT.

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] Hedpfxsuhb Tke Ai Tow - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Year of construction: 2026, operating hours: 36 h, condition: used, functionality: fully functional, Product weight 2-500g, power220V/1P/50HZ, 0.6KW, Speed50-150pcs/min, machinesize: L1240*W535*H1130mm, SUS304,Weight 95kg The equipment can accurately divide the dough/pastry into evenly sized small dosages, which is suitable for the productionof variouspasta, and the divided dosage will be automatically beaten into the required shape, which has high production speed and high production efficiency. Hopper Material: 304 stainless steel 1. Food standard 2. The hopper is suitable for many kinds of fillings like dry filling, scattered filling and other fillings with poor liquidity. It is more anti-corrosion and stable. Enjoy a long life. Cutter and safety cover Features: 1. Easy to take apart and control product length. 2. Does not stick dough. 3. All the material which can touch food we also use healthy materials. 4. Can make different shapes by changing nozzles. 5. High-quality nozzle material. Used, in good condition, still under 1-year warranty from the manufacturer. Selling due to the factory closure. Hedpfxjzx D Dbj Ai Tow More videos & photos on request.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Hedpfxszp E T Ss Ai Tsw Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 800 mm, Travel (Axes) X Axis (mm): 850 Y Axis (mm): 500 Z Axis (mm): 550 Table Table dimensions (mm): 850 x 500 Max load capacity (kg): 350 Pallet change time (seconds): 12 Spindle Spindle speed (rpm): 12,000 Spindle taper: No. 40 Feed Rates Rapid traverse X/Y/Z (m/min): 36/36/36 Cutting feed rate (mm/min): 1–20,000 Tool Change System Tool holder: BT-40 Pull stud: 90° Tool magazine capacity: 32 positions Max. tool diameter with adjacent tools (mm): 75 Max. tool diameter without adjacent tools (mm): 150 Max. tool length (mm): 200 Max. tool weight (kg): 7 Tool-to-tool change time (sec): 1.5 Power Spindle motor power (kW): 11/15 Hedpfx Aisy Ayk Uo Tsw Dimensions Installation footprint (mm): 3500 x 2300 x 2500 Net machine weight (kg): 6,700 MT 800P CONFIGURATION - CE conformity declaration - Fanuc 0iMD - Main transformer 380-200V/50Hz - 11/15 kW spindle motor - Spindle speed 10,000 rpm, DIRECT DRIVE - High-pressure coolant system, 20 Bar - Spindle chiller - Upgraded roller guideways - BT 40 - 32-position tool magazine - Pneumatic chip cleaning system - Maintenance tool kit - Programming and maintenance manuals in Italian - Integrated work light - Chip conveyor