Used Kiefel Thermoforming Machinery for sale (9)

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Kjdewkkpqepfx Anwsdn Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, film width: 570 mm, workpiece length (max.): 520 mm, workpiece width (max.): 420 mm, The system consists of the following components: Unwinding station with a lifting device for the rolls and a take-off device Film preheating station KVH 83 Thermoforming machine KMD52BFS TECHNICAL DETAILS Maximum forming area: 520 x 400 mm Minimum forming area: 260 x 250 mm Maximum tool dimensions: 540 x 420 mm Height of the positive forming part: 120 mm Height of the negative forming part: 120 mm Maximum film width: 570 mm Minimum film thickness: 200 µm Maximum film thickness: 1,200 µm MACHINE DETAILS Operating pressure: 6 bar Maximum air consumption: 50 Nl/cycle Heating power, upper heating: 15 kW Ksdpezfgglofx Anwodn Heating power, lower heating: 15 kW Vacuum pump: 100 m³/h Voltage: 3x 400 V AC + N + PE, 50/60 Hz Total connected load: approx. 80 – 90 kVA EQUIPMENT Forming station for combined forming and in-mold cutting with steel knives Stacking station, including counting and stack ejection A/B stacking function via a second ejector drive, pneumatically powered Winding station for skeleton waste, motorized

Condition: used, Year of construction: 2002, Kiefel KMD 75 BFSS Universal Automatic Roll-Fed Thermoforming Machine, Forms, Punches & Stacks Formed Containers, Sheet Width Approx. 700mm, Infeed Roll Feeder KVH83, Oven, Machine Platen Size 590 x 900mm, Outfeed Scrap Reel, ICS IC410 3 Fan Chiller Unit. Serial No. 203-031 (2002). Country of Origin: Germany Kdodpsy Shbyefx Anwon Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2011, operating hours: 35,000 h, condition: ready for operation (used), This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details. • Operating voltage: 3 x 400V + N + PE / 50 Hz • Connected load: 225 kVA • Nominal current: 264 A • Preliminary fuse: 315 A • Short-circuit strength: 50 kA • Control voltage: 24 VDC • Max. forming area: 860 x 2350 mm • Min. forming area: 340 x 1200 mm • Max. forming part height: 350 mm • Film level: 1805 mm • Max. lower table stroke: 1330 mm • Max. upper table stroke: 585 mm • Rotary upper table: 4-part (Forming / Punching) • Punching force upper table: 30 kN • Punching counterforce lower table: 30 kN Kdjdpfx Ansy Rprqewjn • Operating pressure: 6 bar • Compressed air requirement: approx. 300 Nl/cycle • Max. roll diameter: 600 mm • Max. film width: 1100 mm • Max. film roll weight: 400 kg • Coil diameter max: 76 mm • Vacuum system suction power: 2 x 300 m³/h • Vacuum system power: 7.6 kW • Tank volume: approx. 1000 L • Side channel blower suction: 14 m³/min • Side channel blower power: 8.5 kW • Feed width chain rails: max. 940 mm

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Kdsdpfxjv T An Sj Anwen

Year of construction: 2004, condition: ready for operation (used), Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. Kedol Ax Tvspfx Anwsdn

Condition: used, We are selling a well-maintained generator from Kiefel. The generator and tubes have few operating hours. The rotary table shown in image 1 is no longer available. Kdsdsw Hdzlspfx Anwen

Condition: used, functionality: fully functional, High frequency welding machine Kiefel KH 6000 C-Press height adjustable Generator Kiefel G 20000 SB Kjdpfev A Uddox Anwodn Table size 1350x800 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. Kedpfx Anerh E Ibewedn The machine is still in production mode, but is available immediately.