Used Smb Strapping Machine for sale (27)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 223A012113001, SMB CUBE TIRE REPAIR MACHINE – Functions perfectly. Laedpe Aazygjfx Ahaoh

Condition: repair required (used), Year of construction: 2006, functionality: limited functionality, type of input current: three-phase, SMB strapping tandem, year 2006, with parcel turner from 2010, three-phase power supply, operates with strapping band mm. Maintenance required: replacement of belts and conveyor bands on the strapping machines and belts on the parcel turner (the rollers show significant wear). There is a part to repair or replace on the compressed air cylinder (see photo). Laodpfeyybbvsx Ahash

Condition: good (used), Year of construction: 2006, Compact and fast strapping machine with maximum package dimensions of approximately 600 mm wide x 600 mm high from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward spool changing and threading system. Lasdpfx Aepuy Itjhaoh -Sealing type: Hot wedge welding. -Up to approximately 42 straps per minute. -Strap type: PP strap. -Strap width adjustable from 5-9 mm: Set to 5 mm. -Strap tension adjustable on the control panel. -Soft tensioning possible. -Standby function / power saving mode. -Sturdy foot pedal. -Low-maintenance and low-wear strap frame. -Movable and lockable via foot casters. The machine can be demonstrated with power on.

Condition: excellent (used), Year of construction: 2007, Machine for strapping product stacks year 2007 Lajdpfx Aev Sdczohajh

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Laodpfx Ahot Uzv Teash Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 224A022347001, warranty duration: 12 months, frame height: 600 mm, frame width: 800 mm, Equipment: documentation/manual, Band frame for packages max. 800 mm width x 600 mm height Central sealing unit (max. 40 packages/min., depending on back tension and package size) Standard equipment: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap ontrol ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ Mechanical pre-equipment for strong tensioning ⦁ DAT Direct Access Technology ⦁ Torque-controlled tensioning force, adjustable ⦁ Adjustable transport speed ⦁ EPP Exact Product Path ⦁ Control unit with touch panel (Smart Touch 4.0) ⦁ Mobile machine ⦁ Table height continuously adjustable ⦁ Table tops, hinged ⦁ Table tops with driven table belts ⦁ Package flow monitoring Ledpeynh Drsfx Ahasah ⦁ Bobbin scanning ⦁ Signal lights Special equipment ⦁ Roller table 800 mm complete with EPP ⦁ Right-hand machine (viewed in conveyor direction) ⦁ Table extension 450 mm, driven (roller table) ⦁ Electric package press VERO 800x600 DH=500 ⦁ Signal exchange with line control

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: N3.610, Manufacturer / Origin: SMB / Germany ( EU) Laedpfewifc Aox Ahash

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Lasdpfez Dhrqjx Ahaeh Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 111B030728009, type of input current: AC, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Strapping machine with strap frame (aluminum) for packages up to 600 x 600 mm (up to 48 straps/min.; depending on tension and frame size) Features: ⦁ Exhaust system ⦁ Strap ejector ⦁ Fully automatic strap feed ⦁ Strap end detection with remaining strap ejection ⦁ Strap cutting blade Ledpjy Tnzpsfx Ahaeah ⦁ Electric spool brake ⦁ Foot switch on the operator side, also for continuous strapping ⦁ Machine height adjustment (table height 755–895 mm) ⦁ Mobile machine (2 locking casters) ⦁ Power cord (length 3 m) ⦁ Package weight max. 30 kg ⦁ PC control with operator panel ⦁ Internal spool ⦁ Stepless adjustment of tension ⦁ Smooth, bolted table tops ⦁ Ambient temperature from +10°C to +40°C ⦁ Strapping width 5–9 mm (thickness approx. 0.40–0.45 mm) 12-month warranty (in accordance with the enclosed warranty terms) Complete documentation Spare parts supply Technical service

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: N3.610, Available: immediately Lajdswiffwjpfx Ahajh

Condition: excellent (used), total height: 1,140 mm, total length: 1,940 mm, total width: 1,660 mm, Type of fuel: Diesel Year of construction: 2007 Lsdpfxez S U D Re Ahajah Drive: motorised Empty weight: 430 kg Attachment suited for: Construction machines Working width: 165 cm CE mark: yes Technical condition: very good Visual appearance: very good Hydraulically driven sweeping brush with dirt collection bin and water tank for dust suppression

Condition: used, color: other, first registration: 08/2005, Year of construction: 2005 Empty weight: 450 kg Serial number: no template We have a stock of >100 axles. Lsdpjzt N Syofx Ahasah Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 08/2005, Year of construction: 2005 Empty weight: 450 kg Serial number: no template We have a stock of >100 axles. Laodpfjzt Rb Nex Ahaeh Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 06/2005, Year of construction: 2005 Empty weight: 450 kg Serial number: no template We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Laodozt Rcmopfx Ahaeh

Condition: used, color: other, first registration: 04/2005, Year of construction: 2005 Empty weight: 450 kg Serial number: NO TEMPLATE We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Laedpfxozwvgxo Ahaoh

Condition: used, color: other, first registration: 04/2005, Year of construction: 2005 Empty weight: 450 kg Serial number: NO TEMPLATE. We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Laodpfjy Efvbsx Ahaoh

Condition: used, color: other, first registration: 08/2004, Year of construction: 2004 Serial number: UNKNOWN Lsdpfxow Tkrce Ahaoah We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 08/2004, Year of construction: 2004 Serial number: UNKNOWN We have a stock of >100 axles. Ledpfew Tkxcox Ahaeah Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 04/2005, Year of construction: 2005 Empty weight: 450 kg Serial number: NO TEMPLATE We have a stock of >100 axles. Lajdpfsy Efw Ssx Ahaoh Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2005, Year of construction: 2004 Serial number: NO TEMPLATE We have a stock of >100 axles. Ljdpfx Ahew Emxksaeah Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 11/1990, Year of construction: 1990 We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Lasdpfx Ahsu U Nfnsaoh

Condition: used, color: other, first registration: 11/1990, Year of construction: 1990 We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Ledpfx Ahou U Nh Nsaoah

Condition: used, color: other, first registration: 08/2000, Year of construction: 2004 Serial number: UNKNOWN We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Lasdsucu S Aopfx Ahash

Condition: used, color: other, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Ledsnh Nyrspfx Ahajah

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers Lodolatv Aepfx Ahaoah - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW