Used T.h.e. Machines Slt 100 for sale (78,840)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 340 mm, total width: 280 mm, total length: 660 mm, ground cable length: 2,500 mm, overall weight: 31 kg, type of cooling: air, hose package length: 5,000 mm, electrical fuse: 32 A, protection type (IP code): IP23, welding current (min.): 100 A, welding current (max.): 1,000 A, Equipment: documentation/manual, type plate available, incl. welding torch A12 – gas length 5 m, with shielding gas stand PSS-2 and accessories for ARC 6 to 12 mm gas, protective hose for hose assembly Bjdpfjyrtp Uex Ahmoln Application: - Particularly suitable for thicker sheet metal from approx. 2 mm - Stud welding of welding nuts type HexNut M6 to M8 (special accessory required) - For welding on perforated and non-perforated sheets Features: - Microcontroller control - Function monitoring - Error code display - Lift-off test - Library function - Process flow control Safety: - Integrated mains filter - Optimal for construction sites with high mains voltage fluctuations - EMC tested - High voltage testing - Restart lockout - Thermal monitoring of the transformer - Thermally controlled fan - Galvanic isolation between control and welding cables - Maximum protection against external interference - Protection class IP 23

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Blodpfx Aeu Ixt Djhmsn

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), Bodpfx Asw Avptjhmsln with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: like new (used), Year of construction: 2026, operating hours: 22 h, overall weight: 1,500 kg, We offer a demonstration table-type shot blasting machine – high-quality Czech production, using quality materials in its manufacture. Type – TSM1. Number of operating hours – 22. - Turntable diameter – 1000 mm - Maximum height of the blasted part – 550 mm - Overall machine height – 2750 mm - 1x blasting turbine – power consumption – 5.5 kW, turbine with a frequency converter for regulating the turbine rotation speed. The turbine has both left and right rotation directions, as needed. - Abrasive conveying system – power consumption – 0.75 kW. - Table rotation – power consumption – 0.75 kW - Total machine power consumption – 7 kW. The cabinet is lined with manganese steel. We also manufacture table-type shot blasting machines with a table diameter of 1500 mm. Bledpfx Ahsztvclomsn A significant advantage of the machine is the ability to change the turbine rotation direction to either right or left. Shot blasting equipment with CE certification. Another advantage of the equipment is its high efficiency during shot blasting, quiet operation, low energy consumption, and the requirement for a small space for installation. In its category, this table-type shot blasting machine can be considered very well-designed. (Sandblaster, sandblasting, shot blasting, sandblasting equipment, shot blasting equipment, shot blasting machine). Blast machine.

Condition: like new (used), functionality: fully functional, Heidelberg Ti 36/66 folding machine + Kbi36 + Sta 30 F with marking system + NSF 36 (no stop feeder), consisting of: - Flat pile feeder Fi 36 - Year 2002 - 1st folding station Ti36/6 with 6 folding pockets on the first unit, equipped with new extra grip soft rollers (Falztechnic) - Year 2002 - 2nd folding station Ti 36/6 with 6 folding pockets on the second unit, equipped with new extra grip hard rollers (Falztechnic) with polycord for extra small formats - Year 2003 - Electronic knife KBi 36 for cross folding - Year 2002 - Small format delivery STA 30 F + MKE with shingled stack movement - Year 2005 - No stop feeder NSF36 for continuous production. Blsdpfeyzpmcjx Ahmon - Shingle delivery SA36 - Year 2004 - Transfer table between 1st and 2nd station

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Bsdpfx Ahozuyhnemjln

Condition: used, Year of construction: 2004, functionality: fully functional, HEIDELBERG ST100.2 STITCHING MACHINE Year 2004, second-hand, in excellent condition, cleaned and checked composed by 6 sheet feeders + cover feeder Bsdpfxjzr Halj Ahmeln stitching station with 2 heads trilateral (trimmer) controls for signature pick-up and spine length OPTIONAL: double centre-cut

Condition: new, work piece width max 145 x 150 mm band speed 1.0 - 8.0 m/min workpiece height max. 100 mm total power requirement ca. 5.5 kW weight of the machine ca. 900 kg. dimensions of the machine ca. 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit for rounding the edges of laser-cut parts - Adjustable speed of the disc brushes - 1 brush rotates clockwise - 1 brush rotates counterclockwise - Brush diameter: 250 mm - Motor power: 2 x 1.1 kW INCLUDED CONVEYOR BELT Bljdpfxozwxy Ie Ahmen - The conveyor belt is made of synthetic rubber - The belt has high adhesive strength to hold parts in place - The conveyor belt is oil- and spark-resistant - Transport speed: 1-8 m/min. INCLUDED VACUUM TABLE FOR SECURING SMALL PARTS - Installed as standard - Vacuum motor power: 2.2 kW - Minimum workpiece dimensions: 25 x 25 mm - Maximum workpiece dimensions: 145 x 150 mm GENERAL INFORMATION: - Mechanical measurement of workpiece thickness - Digital display of material thickness - Pressure rollers are spring-mounted - Fixed working height

Condition: used, Year of construction: 2025, table length: 3,100 mm, table width: 2,100 mm, Technical data - Table size: 3100 x 2100 mm Bljdpfezuw Tzox Ahmon - 4-axis main spindle - Linear tool changer, 16 positions - 2 vacuum pumps - 12 vertical drilling spindles - 1 dado blade

Condition: excellent (used), This machine was overhauled in 2025 and is therefore in like-new condition! Bodpfx Ajwq I Iqohmeln Technical data: - Min. drilling diameter 16 mm - Max. drilling diameter 35 mm - counter boring 65 mm - Max. drilling depth 1,400 mm using BTA method - Required machine footprint approx. 6,100 x 3,100 mm - Max. machine height 2,400 mm - 2 separate drilling units, mounted on base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw and feed gearbox - Rapid traverse speed 4,000 mm/min - Feed speed max. 230 mm/min - Drive power per drilling spindle: 11 kW (2 pieces) - Infinitely variable speed up to max. 6,000 rpm - Hydraulically attachable tailstock with counter run - Tailstock manually movable on base plate with T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotating clamping bell holder, basic holder each - 2 pre-centering devices each - Drilling depth control via cams and limit switches - CNC control SFT and FU, connection 380 V / Rated current 80 Amp. - Each unit has its own control and own feed motor With this machine you actually receive 2 single-spindle machines, as each spindle is operated separately with its own control and feed motor.

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. Blodpfx Ahoyudxxsmen - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. More photos and full specifications: / * Manufacturer: Henkovac * Model: H 1000

Condition: used, Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: - Working width: 720 mm Bljdezryr Uepfx Ahmjn - Max. clearance: 820 mm - Drilling depth, vertical: 45 mm - Drilling depth, horizontal: 120 mm

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection Bedpfx Asw Ty S Sehmsln - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 14,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 5,000 mm, total height: 4,900 mm, total length: 22,000 mm, table length: 14,000 mm, table width: 2,000 mm, table load: 50,000 kg, FP model, ideal for a wide range of applications involving medium to large-sized components. Blodpsvn S E Njfx Ahmon Floor-type milling and boring machine - High dynamics with traverse speeds up to 35 m/min - INA linear guideway system - Hydro-mechanical clamping slides - Orthogonal milling head enables machining at any desired angle Technical data: - X-axis travel: 14,000 mm - Y-axis travel: 2,600 mm - Z-axis travel: 1,500 mm - Table length: 14,000 mm - Table width: 2,000 mm - Table load capacity: 50,000 kg - Spindle power: 43 kW - Spindle speeds: up to 5,000 rpm - Spindle taper: ISO 50 / BT / MK - X-axis feed rate: 35,000 mm/min - Y-axis feed rate: 35,000 mm/min - Z-axis feed rate: 35,000 mm/min - Automatic orthogonal milling head positioning: 1° increments - Operating hours: 3,500 h - Machine length: 22,000 mm - Machine width: 5,000 mm - Machine height: 4,900 mm - Machine weight: 31,000 kg

Condition: used, Plate assembly, clamping plate with T-slots 8000 x 2100 mm, 2-piece Clamping surface: Length: 8000 x Width 2100 mm Plate thickness: 360 mm Bsdpszc Nt Defx Ahmjln - Consisting of 2 clamping plates with 7 T-slots each (Length 4000 x Width 2100 x Plate thickness 360 mm) Transport dimensions: 2 plates stacked on top of each other Plate assembly: Length 4000 mm x Width 2100 mm x Height approx. 900 mm Transport weight of plate assembly: approx. 14 tons Good condition

Condition: new, Year of construction: 2026, CORMAK 3040x1300 Radial Drill Press The CORMAK 3040x1300 radial drill press is an advanced industrial machine designed for precise drilling operations in materials such as steel and cast iron. The machine features a robust column construction and a wide range of radial arm adjustments, providing excellent stability and flexibility when machining large workpieces. Its key advantage is the ability to drill holes up to 40 mm in diameter while maintaining high precision. Main advantages of the CORMAK 3040x1300 radial drill press Heavy-duty construction weighing 1400 kg – ensures exceptional stability and vibration reduction, resulting in precise drilling and extended cutting tool life. Adjustable radial arm with a reach of 360–1300 mm – enables drilling in large and irregular workpieces without repositioning, increasing flexibility and reducing setup time. MK4 spindle taper with six speed settings (75–1200 rpm) – allows precise adjustment of machining parameters for different materials, enabling drilling holes up to 40 mm in steel and cast iron. 200 mm spindle stroke – allows deep drilling in a single cycle, improving production efficiency. 2.2 kW main motor – provides high torque for reliable continuous operation with optimized energy consumption. 0.75 kW arm lifting motor – enables smooth and fast vertical adjustment of the radial arm at a speed of 1.3 m/min, improving operator ergonomics. Cube worktable measuring 510 × 380 × 305 mm – allows secure mounting of irregularly shaped workpieces, increasing machining safety and accuracy. Ergonomic control panel – positioned at the front of the machine for intuitive operation and quick parameter adjustment, minimizing downtime. Ground column surface – ensures smooth and precise arm movement, eliminating play and improving positioning accuracy. Manual head and arm locking system – increases safety and stability during drilling by preventing uncontrolled movement. Three spindle feed rates (0.10, 0.16, 0.25 mm/rev) – provide precise control of the drilling process according to the material and machining requirements. Standard equipment B16 drill chuck (3–16 mm) Drill chuck arbor B16/MK4 Reduction sleeve MK4/MK3 Drift key Cube worktable 510 × 380 × 305 mm Operating manual Technical specifications Parameter Value Maximum drilling diameter 40 mm Spindle axis to column distance 360–1300 mm Spindle axis to table surface distance 260–1300 mm Spindle stroke 200 mm Blsdei D Daqspfx Ahmen Spindle taper MK4 Number and range of spindle speeds 6: 75, 130, 240, 380, 660, 1200 rpm Number and range of spindle feeds 3: 0.10; 0.16; 0.25 mm/rev Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Arm lifting motor power 0.75 kW Worktable dimensions 510 × 380 × 305 mm Machine dimensions 800 × 1800 × 2150 mm Weight 1400 kg

Condition: used, Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the stable milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: - Working width: approx. 1,000 mm Bledpfxsztvxgo Ahmen - Spindle diameter: 40 mm - Feed: Pneumatic

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Bjdpfswpku Djx Ahmeln Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Description: Bjdsyi Emyepfx Ahmsln - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Condition: used, Year of construction: 1986, Manufacturer: DumekModel: ED100Year: 1986Type: Volumetric dosing machinePressure and dispensing time controlOperating mode: semi-automatic/automaticStainless steel hopper with double jacket: 15 L   Bodpfx Aoygx S Rshmoln  

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter Bljdpfx Aewcfgbehmon 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Control system: M+ Mazatrol Machine weight approx.: 7,500 kg Blodpfx Asz Ahw Hjhmen Space requirement approx.: 5 m² EQUIPMENT Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Bjdefbt Hujpfx Ahmeln Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: new, Year of construction: 2026, Machine vice QH125 125x100 mm – precise clamping for machining applications Machine vices are an essential component of mechanical workshops and tool rooms. The QH125 machine vice (125x100 mm) is a robust and reliable solution designed for use with drill presses, milling machines, grinders, and shaping machines. Thanks to its rotating base and high manufacturing precision, this vice enables efficient and repeatable workpiece clamping, even under intensive operating conditions. Main advantages of the QH125 machine vice 360° precision graduated scale – allows the vice to rotate with 1° accuracy, significantly increasing flexibility during machining operations. Blodpfx Asvxghmohmjn High-quality cast iron construction – both the body and jaws are made from durable cast iron with increased resistance to deformation and vibration. Protected lead screw – protection against chips and contaminants extends service life and ensures smooth operation. Removable swivel base – allows the vice to be used as a fixed version for operations requiring maximum rigidity. Construction and technology The QH125 is a compact and carefully designed rotary machine vice. The integrated body and base provide excellent stability when machining materials of different hardness. Replaceable hardened jaws ensure strong and secure workpiece clamping. To maintain maximum accuracy, it is recommended to machine the contact surfaces of new jaw inserts before use. Precision and work efficiency The QH125 provides excellent repeatability of workpiece positioning, even when changing the orientation frequently. A high clamping force of up to 2500 kg ensures secure holding during drilling, milling, and grinding operations. The rigid construction minimizes vibration and prevents unwanted movement, directly improving machining quality. Applications This professional drill press vice and machining vice is ideal for: tool rooms and metalworking workshops, serial production facilities, maintenance departments handling individual components, prototyping and precision machining departments. Standard equipment 360° swivel base with 1° graduation Replaceable hardened jaws Protected lead screw mechanism Optional equipment Soft and hard jaw inserts for non-standard workpieces Mounting bases adapted to specific machine models Technical specifications – QH125 machine vice Parameter Value Jaw width (S) 125 mm Maximum opening (a) 100 mm Jaw height (m) 40 mm Body height (h) 92 mm Total height (H1) 125 mm Base width (H) 166 mm Mounting hole spacing (A) 295 mm Overall length (L) 285 mm Mounting hole diameter (D) 14 mm Clamping force 2500 kg Weight 16 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 Bodpfx Ahey Unmujmeln 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Model - Swift.  Date of manufacture - 2011.  Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.