Used Mazak Integrex 200 Y for sale (31,266)

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Year of manufacture: 2008 Control system: Mazatrol Matrix Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Ncjdpfx Aoyh I Tdjkust Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, Ncedpetmtktefx Akust C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Nedpfx Akoyrvzmsusct Milling spindle speed:20,000 rpm Power:24 kW Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Software option III:Cylinder interpolation Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Condition: ready for operation (used), Year of construction: 2012, Main Drive Number of axis 5 This 5-axis Mazak INTEGREX I-150 turn-mill centre was manufactured in 2012. Consider the opportunity to buy this Mazak INTEGREX I-150 turn-mill centre. Contact us for more information. Application Types Ncedpfex D I Rpex Akujt Turning

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Nsdpfx Asxf Iklskuoct

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. This is an exchange spindle, which means a used part is required in return. Nsdpfxjxawcto Akuect If you have any further questions, we are happy to assist you.

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, Ncedou Rb Snjpfx Akujt B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor

Condition: excellent (used), Year of construction: 2010, 412mm max. machining diameter, maximun turning length 753mm, 225 degree movement on B axis, 15HP spindle motor power, 6,000rpm spindle speed, 6,000 rpm sub spindle speed, 52mm bar capacity, milling speed 12,000rpm C axis & Milling, 9 station lower turret. Swarf conveyor, tool setter, Coolant, Interlocked guards, Swivelling Universal Head., C Axis (0.001deg), Mazatrol Matrix control Ncedpfswxw A Hjx Akust

Condition: excellent (used), Year of construction: 2019, Control system: Mazatrol Smooth X 5-axis simultaneous machining Max. turning diameter: 530 mm Max. turning length: 854 mm Main spindle: - Max. spindle speed: 6,000 rpm - Spindle nose: A2-5 - Max. bar capacity: 52 mm - C-axis, 0.0001° Sub spindle: - Max. spindle speed: 6,000 rpm - Spindle nose: A2-5 - C-axis, 0.0001° Ncodpfsyay Hcsx Akujt Milling spindle: - Max. spindle speed: 12,000 rpm Tool magazine / ATC: - 72 tool stations Additional equipment: - Full C-axis for main and sub spindle, 0.0001° - Tooleye - Mazak Monitoring B, Renishaw RMP600 probe - Interface for bar feeder - Bar feeder: Hydrafeed MSV80 - Parts unloader - Parts accumulation system: Hydrafeed Rota-Rack - 5-axis machining package for SmoothX - Smooth synchronized tapping (milling spindle) - Tool radius compensation / 5-axis - Cylindrical interpolation - Fine spline interpolation - Preparation for multi-tool and flash tool - G00 constant lead - Tool-ID preparation - Chip conveyor with filter, Cromar - Separate coolant tank - 70 bar high-pressure pump - Coolant temperature control

Condition: excellent (used), Year of construction: 2016, operating hours: 1,500 h, Smooth X 5-axis simultaneous machining Max. turning diameter: 658 mm Max. turning length: 1,011 mm Travel distances X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,077 mm Tailstock: 1,026 mm Nodeyay Efjpfx Akujct B-axis: -30° to 210° Main spindle Drive power: 30 kW Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Milling spindle Drive power: 22 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 110 tool stations Tailstock Programmable NC tailstock, MT5 3-jaw chuck Schunk ROTA THW plus 315-104, diameter 315 mm 15 bar high-pressure pump Hinged belt chip conveyor Mazak Monitoring B, Renishaw RMP 60 Power-on hours: approx. 10,000 hours Pure cutting time: approx. 1,500 hours

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 Ncjdpfx Aeyam D Ujkust - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: excellent (used), Year of construction: 1999, CNC Lathe Njdpfxox Hgl Ho Akusct MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: excellent (used), Year of construction: 2000, CNC Lathe MAZAK SUPER QUICK TURN 200 Year of manufacture: 2000 Working area: Max. swing diameter: 525 mm Max. turning diameter: 350 mm Max. turning length: 514 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Turret: Standard version: 12 stations Travel: Turret travel: X-axis: 190 mm Z-axis: 535 mm Nedexvb E Dopfx Akuect

Condition: like new (used), Year of construction: 2023, Mazatrol Smooth Ai 5-axis simultaneous machining Max. turning diameter 670 mm Max. turning length 1,519 mm Travel distances X-axis: 695 mm Y-axis: 300 mm Z-axis: 1,585 mm W-axis: 1,569 mm B-axis: -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed: 4,000 rpm C-axis Max. bar capacity: 80 mm Sub spindle Drive power: 26 kW Max. spindle speed: 4,000 rpm C-axis Ncodpfx Ajww N Ixokuet Milling spindle Max. spindle speed: 12,000 rpm B-axis Capto C6 Tool magazine / ATC 38 tool stations Through-spindle coolant, preparation up to 70 bar 5-axis simultaneous machining package G00 slope constant Tool ID system ID chip Synchronized thread cutting Cylindrical interpolation Interface for bar feeder Automatic parts catcher Parts catcher Kitagawa B210X 3-jaw chuck for main spindle Kitagawa B210X 3-jaw chuck for sub spindle Cromar Series iV chip conveyor Drum filter High-pressure pump 15 bar Bar feeder EMT Super 80

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, Smooth Ai Control Max. turning diameter: 600 mm Max. turning length: 850 mm Travel paths: X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis: -30° to 210° (0.0001° increments) Main spindle motor: 11 kW Max. main spindle speed: 6,000 rpm Max. bar capacity: 52 mm Max. counter spindle speed: 6,000 rpm Milling spindle motor: 12 kW Capto C6 Max. milling spindle speed: 12,000 rpm B-axis, 0.0001° resolution Tool magazine for 38 Capto C6 tools IKZ interface 70 bar Knoll KF150/950 compact filter system 70 bar high pressure pump Mayfran MT10 chip conveyor 5-axis machining package for Smooth Ai Cylinder interpolation 5-axis simultaneous machining on the counter spindle Synchronized tapping G84.2 and G84.3 Thread chasing function Mazak API Full C-axis on counter spindle (0.0001°), C1 + C2 synchronization Linear scale for X-axis Linear scale for Y-axis Mazak Monitoring B, Renishaw RMP60 probe 3-jaw chuck main spindle, Kitagawa BB206 3-jaw chuck counter spindle, Kitagawa B206 Ncedpfexvqm Rex Akust

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 125853, spindle speed (max.): 3,000 rpm, overall weight: 7,300 kg, controller model: MAZATROL T PLUS, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025. Nodpew Hrvwjfx Akujct TECHNICAL DETAILS Work Area Maximum swing: 575 mm diameter Swing over cross slide: 470 mm diameter Standard chuck size: 305 mm Distance between centers: 1,527 mm Height of spindle center: 310 mm Max. load capacity with chuck work: 250 kgf Max. load capacity between centers: 1,000 kgf Max. speed of KITAGAWA power chuck: 3,000 rpm Control: MAZATROL T PLUS MACHINE DETAILS Dimensions & Weight Dimensions (L x W): 6,000 x 2,450 mm Machine weight: 7,300 kg Main motor: AC 22/30 kW (continuous/30-minute operation) Total electrical capacity: 63.6 kVA (30-minute operation) / 51.9 kVA (continuous operation) EQUIPMENT Delivered with technical documentation

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] Ncjdjuhal Sopfx Akust - Max. bar diameter : 61 [mm] - Max. turning diameter : 400 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 795 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 410/805 [mm] - Y stroke : 140 [mm] - B Axis stroke : 225 [°] - B axis indexing precision : 0.001 [°] - Tool type : CAT 40 - Spindle speeds : 12000 [rpm] - Spindle power : 6.6 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 LOWER TURRET - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3075 X 2330 [mm] - Machine height : 2450 [mm] - Machine weight : 7500 [kg] MACHINE HOURS - Number of hours under power : 75434 [h] - Number of working hours : 49153 [h] EQUIPMENT - CNC : Mazatrol MATRIX - Interactive programming - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor - Oil mist extractor : ELBARON - Tool probe - Tool breakage detection - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD - Electric transformer

Condition: excellent (used), Year of construction: 2011, Turning and milling center, year of manufacture 2011 Condition: very good X - 370 mm Z - 435 mm Y - 200 mm Ncodpfx Akjxr A Hnjuet W - 300 mm Main spindle 5,000 rpm 11 kW Driven tools 12,000 rpm 7.5 kW 72 tool stations HSK63 Thread cutting + cylindrical and polar interpolation Bar loading magazine IRCO B-axis 0.0001˚ C-axis 0.0001˚ High-precision option X-Y-Z Automatic Tool Eye Automatic part removal Air blow-off at turret High-pressure cooling 70 bar Renishaw NC 4 laser Renishaw OMP 60 incl. Inspection Plus Chip conveyor Hainbuch TOPlus

Condition: excellent (used), Year of construction: 2014, operating hours: 2,315 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 400 mm, turning diameter: 320 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 50,000 rpm, spindle bore: 75 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, total height: 1,700 mm, total length: 2,630 mm, chuck outer diameter: 210 mm, total width: 1,700 mm, bar diameter (max.): 66 mm, quill stroke: 500 mm, swing diameter over cross slide: 660 mm, spindle nose: 6, overall weight: 4,500 kg, MAZAK QUICK TURN 200 Smart Operating hours: Automatic cycle: 2,330 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: D 660 mm Max. turning diameter: D 350 mm Max. bar capacity: D 66 mm Max. machining length: 520 mm Main Spindle Max. spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 180 mm / 550 mm Tailstock Mount: MT NC axis, pressure via M-codes Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flushing General Specification: Nsdpfjwzkzzex Akujct - SD MEMORY I/F (1 port) + USB MEMORY I/F (1 port) - Mazak standard colour - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed live center mount - Operator door with interlock switch - Double foot switch - Fully enclosed work area - Work area lighting - Safety features compliant with global standards - Complete coolant system - Chuck condition monitoring - Automatic Tool Eye - 10.4" color screen - EIA/ISO package - LAN interface - Standard tool set

Condition: excellent (used), Year of construction: 2011, operating hours: 5,000 h, functionality: fully functional, Mazatrol Matrix 5-axis simultaneous machining Max. turning diameter 340 mm Max. Swing diameter 400 mm Max. turning length 385 mm Max. Bar passage 65 mm Travel X/Y/Z/W: 370/200/435/300 mm B: -10° to +190° (0.0001°) Main spindle max. spindle speed: 5,000 rpm Milling spindle max. spindle speed: 12,000 rpm Capto C6 Tool magazine / ATC 72 tool places Ncedpfx Aevgd Rnskust Chip conveyor, ejection on the right High pressure pump 15 bar Interface for bar loader Parts unloading - finished parts gripper incl. conveyor belt Cylinder interpolation

Condition: used, Year of construction: 2005, Mazak QTN 200 lathe, year of manufacture 2005 Mazatrol 640T 210 mm Kitagawa BB 208 chuck Spindle bore 65 mm Turning length 500 mm Turning diameter 380 mm Tailstock Ncedpfx Akjxgpqpsust Tool probe

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Ncjdsw Rm Diepfx Akujt Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Ncodpfx Aeyyxzmjkuet Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine, magnetic grinding machine Nodpot N Adbjfx Akuect -Manufacturer: Blohm, surface grinding machine-horizontal -Table size: 770 x 140 mm, swiveling -Travel paths: x 490 mm / y 200 mm / z 220 mm -Dimensions: 1030/870/H1510mm -Total weight: 403 kg

Condition: excellent (used), Year of construction: 2005, operating hours: 1,947 h, functionality: fully functional, turning length: 1,000 mm, WE OFFER AN VERY NICE CONDITION MAZAK QTN-250 / 1000L (built in 2005) FULLY FUNCTIONAL FROM THE PRODUCTION • MAZAK QTN-250 / 1000L (built in 2005) • MAZATROL 640 control • 1 turret Njdpfxeyhzv Sj Akuect • 12 tool positions • includes tool eye and chip conveyor • Speed range 4.000 rpm • fully functional • regular documented maintenance • available from 05/2026 IN MAY 2026 WE CAN LOAD MACHINE FOR CUSTOMER