Used Chemspeed Asw2000 Parallel Synthesiser for sale (893)

Condition: used, Year of construction: 2012, functionality: fully functional, General overhaul, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 (25 programs with a total of 500 segments, freely selectable) -Parallel pivoting door for opening in the hot state -Slot in the oven collar on the lower right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW Nedpoyn Emqjfx Ai Town -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Oven, industrial oven, annealing furnace, heat treatment oven, chamber oven

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Nsdjwrb U Tjpfx Ai Tjwn

Condition: used, Martin T 60 panel saw Heavy-duty precision panel saw 3-axis positioning control with 5.7-inch touch screen 3-axis scoring saw Motor: 5.5 kW Nedpsz Azxqofx Ai Tewn Saw blade can be tilted from 0 to 46° Motorized saw blade height adjustment Saw blade diameter up to 400 mm Cutting length: 3300 mm Cutting width with parallel guide: 1250 mm Manual adjustment of the parallel guide Parallel guide position can be read on the touch screen Swiveling control panel above the table CE version Machine is WORKSHOP OVERHAULED and in TOP CONDITION Available from stock in Lieboch

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust Nodez Dxpmjpfx Ai Tswn - Hardened rollers •Excellent heat tre...

Condition: excellent (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 678 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 year of construction: 2011 operation hours: 78454 h clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm Nwsdpfx Asz A U Ivji Ton size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included: Machine WITHOUT robot!! screen text german CEE-socket 16A pressure accumulator for parallel function of hydr.ejector and core pulling core pulling hydraulically 2x machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface for handling Schuko-socket 10A measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: excellent (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 250-1400 CX Stock No.: 503243 Manufacturer: KRAUSS MAFFEI Type: KM 250-1400 CX Control System: MC5 Year of Manufacture: 2010 Operating Hours: 54872 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing (horizontal x vertical): 630 x 630 mm Njdpjz A Uhiefx Ai Town Platen Size (horizontal x vertical): 995 x 1050 mm Minimum Mold Thickness: 330 mm Maximum Mold Thickness: 1150 mm Opening Stroke: 820 mm Ejector Stroke: 200 mm Ejector Force: 58 kN Centering of Moving Platen Diameter: 160 mm Centering of Fixed Platen Diameter: 160 mm Tool Weight: 3430 kg Technical Data – Injection Unit Screw Diameter: 55 mm Injection Volume: 570 ccm Injection Pressure: 2387 bar Screw Length: 22 l/d Screw Speed: 260 rpm Plasticizing Rate: 49 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions (LxWxH): 6.5m x 2.2m x 2.3m Total Weight: 15000 kg Equipment 2x Temperature Control Units for Hot Runner System Screen Text in German CEE Socket 16A Pressure Accumulator for Increased Injection Performance + Ejector or Core Pull parallel Hydraulic Core Pull 1x Air Valve 4x Machine with Material Hopper Machine with Water Battery Machine without Handling System Leveling Elements EUROMAP 12 Interface EUROMAP 67 Handling Interface USB Interface Schuko Socket 10A Low-Wear Plasticizing Unit

Condition: used, Used Machine Features and Technical Specifications: - Table size: 800 x 1000 mm - Table opening diameter: 480/380/170/125 mm - Milling spindle taper: MK 5 - Milling spindle speed: 3000, 4500, 6000, 9000 rpm Nwjdpozlbqxsfx Ai Ton - Milling spindle height adjustment range: 150 mm - Distance from center of milling spindle to front edge of table: 400 mm - Maximum allowable tool diameter: 250 mm - With wooden stop jaws (can be replaced with metal stop jaws upon request) - With a wooden Her 3 roller feed mechanism - With heavy-duty sliding table; runs on ball bearings along guideways milled to be absolutely parallel Dimensions: 205 x 130 x 150 cm Weight: approx. 800 kg

Condition: good (used), *SAG 210 Specifications:* - Center height: 210 mm - Maximum diameter above the bed: 420 mm - Distance between centers: 1000 mm - Spindle: Camlock D1-6, 52mm bore - 12 speeds, 30 to 2000 rpm - Threading: Metric, Whitworth, Module, DP - all without changing the gear train - 5.5 kW / 400V motor - Weight: ~ 1,650 kg > *GRAZIANO SAG 210 LATHE - Refurbished by CMV Villampuy 1996* > Italian Graziano Tortona SAG 210 parallel lathe, 1000mm distance between centers, 210mm center height. > Refurbished by CMV Villampuy (plate dated 1996), bed ground, complete Norton gearbox. Nsdpfozxiv Aex Ai Town > 400V motor, 52mm bore, metric / Whitworth / module / diametral pitch threading.

Condition: new, Year of construction: 2026, power: 18 kW (24.47 HP), _____Standard equipment: special low-profile design, 3-cylinder Kubota D1703-D-Di diesel engine, 18.5 kW (25 hp), hydrostatic all-wheel drive with driveshaft and automotive control, high-pressure HD-plus drive, tires 10.0/75-15.3 AS, ET+40 incl. reversible rims (HFT /High Traction Force), SPT (Schäffer Power Transmission), hydraulic quick gear for 20 km/h, original Schäffer axles, 6-hole combined oil cooler, maintenance-free and wear-resistant disc brake in an oil bath as service and parking brake, maintenance-free articulated pivoting joint, roll-over protection system (driver protection canopy), LED work lights: 2x front, 1x rear, parallel guidance, additional control unit mechanically operated, work hydraulics: series / option: 37 / 42 l/min, adjustable steering column, hour meter, fuel and temperature gauge, rear weight end plate, seat contact switch, quick-change frame SWH with hydraulic locking. Optional equipment: tires 31x15.5-15 AS 6-hole, ET -37, attachment frame Euro-WS with hydraulic locking, gear pump reinforced 19 ccm, preparation for lighting system, towing device with pin and lashing eyes, storage location: null Njdpfezzhb Nox Ai Town

Condition: new, Year of construction: 2026, power: 18 kW (24.47 HP), _____Standard equipment: 3-cylinder Kubota D1105 diesel engine, 18.5 kW (25 hp), hydrostatic all-wheel drive with automatic control, 7.00-12 AS tires with ET+40, including reversible rims, SPT (Schäffer Power Transmission), original Schäffer axles, 5-hole combined oil cooler, drum brake as service and parking brake, maintenance-free articulated oscillating joint, retention system (driver protection canopy), LED work lights: 2 in front, 1 in the rear, parallel guidance, additional control unit mechanically operated, working hydraulics: standard / option: 33 / 42 l/min, adjustable steering column, operating hour meter, fuel and temperature gauges, seat contact switch, quick-change frame SWH with hydraulic locking. Nwedpfszzhcajx Ai Tsn Optional equipment: attachment frame type SWH, hydraulic locking DW, towing device with pin and lashing eyes, crocodile jaw 1.0 m HL attachment SWH, storage location: null.

Condition: new, Year of construction: 2025, operating hours: 23 h, functionality: fully functional, Only 23 hours of use. New price: €18,736. The CT80 is the smallest in the family of ride-on scrubber-dryer machines. It is compact but knows how to work hard. With its robustness and power, it handles many industrial cleaning tasks. It is versatile, as it comes in two versions: for intensive use, there is the model with 2 brushes (CT80-BT70), and there is also the ECO model (CT80-BT55 ECO) with one brush and therefore a smaller working width. (Excluding charger and batteries) Product specifications: Extremely compact (130 cm length) with a large tank capacity of 79 and 83 liters, respectively. ECO Select function: program that regulates water and detergent supply in relation to the speed of the machine, the brush, and the suction motors, which reduces both energy consumption and noise production. Simple and clear control panel with language selection. Supplied with a memory card for maintenance and service. CFS system: liquid supply from the center of the brush. Prevents unnecessary waste of detergent. SLS system: self-leveling mechanical system for constant, perfect brush pressure on the floor. EDD system: floor nozzle designed for maximum productivity and perfect drying results. Auto-stop system: Easily deactivate and restart the functions using the foot pedal, including the delayed stopping of the brush and suction motor. Ideal also for uneven floors. Nwodpfx Aiszzlvds Tsn Brush, suction rubbers, and water hoses can be replaced without tools. Dosing system for detergent supply. Ensures systematic savings on detergent consumption. The tank is easy to remove. Anti-foam system with special electromagnetic protection of the suction motor. The automatic suction stops when the tank is full. Yellow marked service points for easy daily maintenance. Brush with usage indicator. Tiltable tank for easy access to the technical part of the machine. High-quality motor gearbox, suction motor, and electrical components. The standard nylon brushes have a usage indicator. Electronic adjustment of detergent supply. Raised water discharge hose (ø 50 mm). Built-in battery charger. Automatic brush click-on/off system. Brush rotation: independent brush motor with gearbox in an oil bath. Brush pressure: adjustment motor ON/OFF. Vacuum: 2-stage motor with stainless steel fan and shaft. Traction: motor wheel with parallel shaft, 8% climbing capacity. Plastic parts. Tanks: impact-resistant, high-quality plastic (polyethylene). Floor suction rubbers: made of latex (rubber), usable on 4 sides. Hoses: all water supply and discharge hoses are made of durable polyurethane. Wheels: oil-resistant. Chassis: double-treated, partially cast, and galvanized frame. Bearings: protected against moisture and splashing water. Bolts and nuts: where they come into contact with water, made of stainless steel. Control panels: equipped with protective film against splashing water and moisture. Solenoid valve: ‘Viton’ diaphragm resistant to chemicals. Sensors: water level in both tanks is protected against accidental impact. Memory card: for machine data log: For storage of: battery charging cycles, motor absorption. Display: large, multilingual, complete with hour meter, battery voltage indicator, and cleaning programs.

Condition: used, Year of construction: 1981, power: 5.5 kW (7.48 HP), cutting width (max.): 1,000 mm, tilt adjustment saw blade: 45 °, height adjustment type: hydraulic, saw blade bore: 30 mm, actuation type: hydraulic, rotational speed (max.): 5,000 rpm, Rated power: 380V, 12.8A Main motor: 5.5 kW Sliding table length: 2550 mm Nwodjz At Sijpfx Ai Ton Cutting width: 1000 mm Adjustable parallel fence, foldable Saw blade speeds: 2800/4000/5000 RPM Hydraulic height adjustment and tilting with foot pedal Cross table with fence Miter gauge Parallelogram guard with narrow hood Dust extraction port: 1x140 + 1x80 mm

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 34.0 m/s total power requirement 3.0 kW weight of the machine ca. 75.0 kg dimensions of the machine ca. 570 x 570 x 1150 mm Description: - Excellent grinding performance thanks to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous surface grinding area for optimal grinding of long workpieces - Versatile for grinding edges, surfaces, and for cylindrical grinding - Includes a quick-clamping system for fast belt changes - Easy adjustment of parallel belt alignment using an adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the abrasive belt Scope of delivery: - Sanding belt - Hinged protective shield Nwedoz Auicopfx Ai Ton - Sanding and support table - Workpiece stop - Emergency stop button - Machine base - Operatorâ??s manual (ENG)

Condition: good (used), Year of construction: 1968, functionality: fully functional, Robust Altendorf F90 panel saw in a heavy-duty, solid design. The machine features a large sliding table with a cutting length of approximately 2,600 mm, a parallel fence, and a crosscut/miter fence. A cutting width of approximately 1,250 mm is available to the right of the saw blade. A classic, robust Altendorf machine for use in carpentry workshops and woodworking businesses. Technical specifications Manufacturer: Altendorf Machine type: Panel saw Year of manufacture: 1968 Cutting length: approx. 2,600 mm Cutting width to the right of the saw blade: approx. 1,250 mm Motor power: 5.5 hp / approx. 4.0 kW Voltage: 380 V Equipment Large sliding table Parallel fence Crosscut/miter fence Saw blade guard Manual adjustments Heavy-duty, solid design The machine is in used condition, commensurate with its age. Transport is possible for an additional charge! Note Nedpfjz D Uqtsx Ai Tjwn The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: new, functionality: fully functional, machine/vehicle number: OVS10NEU, Year of construction: 2026, load capacity: 317 kg, lifting height: 4,600 mm, fuel type: electric, mast type: triplex, construction height: 1,660 mm, empty load weight: 1,350 kg, total length: 1,460 mm, drive type: Elektro, construction width: 800 mm, High-level order picker Chassis number: OVS10NEU Mast type: Triplex Transmission: PMSM Condition: New unit Nsdpfx Aijzydwde Tjwn Technical condition: New Front tire type: Polyurethane Front tire condition: New Rear tire type: Polyurethane Rear tire condition: New Battery voltage: 24V Battery capacity: 150Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: - Maintenance-free PMSM drive motors with high efficiency - DC pump and steering units with extended service life and minimal maintenance requirements - Lithium battery: 24V / 150Ah - Maximum platform height: 4,600 mm - Maximum working height: 6,600 mm - Load capacity: 317 kg - 90 kg rear storage compartment - 100 kg front storage compartment - 127 kg operator platform - Drive units with suspension system for improved stability, safety, and comfort - Keyless PIN code panel with RFID card support - Electric lift and lower buttons - High-performance control grips with dual-hand safety operation - LCD display indicating speed, steering mode, operating hours, energy, error codes, etc. - Complies with EU and US regulations - Four different driving modes for various applications - Front-wheel steering for longer distances - Rear-wheel steering for tight and hard-to-reach areas - Lateral (parallel) travel possible - On-the-spot turning (very high maneuverability) possible - Automatic speed adjustment depending on lift height

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Nedpeyhcabsfx Ai Tswn Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: good (used), Consisting of: - 3 parallel drive stations - 1 drive head Nwedpfowif Nvjx Ai Ton - 1 double / 2 / 1 drive station - 1 single-lane, 3 m + 2 x 90°

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm Nwjdpfjxab Erjx Ai Ten from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals Nwedpfexacfgsx Ai Tjn - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The used, FULLY REFURBISHED self-learning CNC lathe GEMINIS GHT4 720X3000 is a robust, medium-large parallel bed lathe equipped with FAGOR 8055 CNC, center height 360 mm, distance between centers 3000 mm, spindle bore 106 mm. The machine is COMPLETELY REFURBISHED AS NEW, including bed grinding, carriage grinding, Turcite overlays, spindle bearings, axis bearings, axis screws, electrical system, motor overhaul, new drives, new FAGOR keyboard, etc. Njdpoxdvbcefx Ai Tjwn The equipment is completed with prearrangement for automatic turret, manual self-centering chuck, and 2 steadies.

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table Nwedpfxsxaarqe Ai Tsn - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm Nwedpoxmk Ebefx Ai Ten - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: used, Year of construction: 2010, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Nwedpfx Ajydctyoi Ton Technical data  - Capacity: 39,000 bottles per hour (bph) - Bottle Formats: 1.5 L - Worked Labels: IN REEL - two label applicators  - Reel Change: Automated - Run Time: Approx. 55,000 hours - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC - Protection Class: IP 54 (main panel and motors) - Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere - working direction: left-right/clockwise  - bottle infeed/outfeed parallel on one side of the machine

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,000 h, clamping force: 3,000 kN, screw diameter: 50 mm, injection weight: 375 g, total width: 2,100 mm, total height: 2,500 mm, overall weight: 14,600 kg, product length (max.): 7,000 mm, Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details. Nwsdpfx Aeyrgq Eei Ton • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. platen distance: 1250 mm • Tie bar spacing (H x V): 730 x 730 mm • Min. mould size: 470 x 470 mm • Platen size (H x V): 1040 x 1040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Injection pressure: 2000 bar • Holding pressure: 1600 bar • Injection speed: 160 mm/s • Injection rate (PS): 274 g/s • Screw speed: 320 rpm • Plasticizing rate: 46 g/s • Nozzle contact force: 85 kN • Barrel heating power: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min • Oil tank capacity: 135 l • Material hopper volume: 50 l • Control system: Sigmatek with 15" colour touch screen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Form data memory: up to 200 moulds • Production data recording: up to 100000 cycles • Statistical process control (SPC) system • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle clamping system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distributor system • PID temperature control system • Ceramic heater bands with thermocouples • Automatic purge function • Energy-saving cylinder insulation • Adjustable machine feet • Installation tools included • Hours: ca. 12,000

Condition: used, Year of construction: 2011, Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. Njdpfx Aisythxao Town The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  - Manufacturer: Paxona - Machine type: Tray line distributor / lane divider - Function: Distribution from 1 lane to 2 lanes - Year of manufacture: 2011 - Operating hours: < 5,000 h - Application: Tray conveying and line distribution - Condition: Used, low operating hours, store