Used Furniture Door Frame Press (Special Size) for sale (48,094)

Year of construction: 2024, condition: new, Here is a new AD-R 37220 being offered: Bending force: 220 tons Bending length: 3700 Distance between stands: 3100 mm Stroke: 265 mm Installed height: 530 mm Overhang: 410 mm Table height: 900 mm Table width: 104 mm Y-axis rapid traverse: 160 mm/s Y-axis working speed: 10 mm/s Y-axis retraction speed: 120 mm/s X-axis working speed: 250 mm/s R-axis working speed (manual): 250 mm/s R-axis travel: 250 mm/s X-axis distance: 650 Length: 4950 mm Width: 1770 Height: 2900 Total weight: 14100 kg Options: CE with manual F.AKAS II M -FPSC-B-C + safety guard & switch R-axis X=650mm X,R (AL) European upper tool P97.75.R08 (one of them is a split die) European lower tool M.460R.85 (one of them is a split die) Quick clamping system CNC-controlled motorized crowning Y1, Y2, X, R (4-axis) X=650mm X,R Control unit - CNC DT-15 Graphical control unit S European clamping system S 60mm die holder (only for European dies) S Overhang 410 410 mm Rear gauge: motorized & linear guide & ball screw system Rear gauge finger, height-adjustable Rear gauge motor: AC type Adjustable support arms with linear guide over the entire length The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Fpodpsd S I R Tefx Afusn Upon request, we will gladly provide you with further information.

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Fpodpfx Aoh U Dtujfusn Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Fpsded Rzc Rjpfx Afujn

Condition: used, Year of construction: 1994, Frame press, Schafberger & Sprödhuber Fpedpfxjilurns Afuen Type Super 4 kW 3 m x 6 m

Condition: used, Three second-hand swivelling clamping shoes from Schafberger + Sprödhuber (S+S) for frame presses used in professional woodworking. They are used to align and securely clamp workpieces when assembling frames and structures. Fpodpfx Asztniwofuon Technical data: - Dovetail width: ~ 58 mm

Year of construction: 2024, condition: new, SPECIAL OFFER: Press brake AD-S 1260 Length/Width/Height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons Bending length: 1250 mm Distance between stands: 1050 mm Stroke: 160 mm Installation height: 530 mm Overhang: 450 mm Table height: 900 mm Table width: 104 mm Y rapid traverse: 200 mm/sec. Y working speed: 10 mm/sec. Control: CYBELEC MODEVA 19T touchscreen CE compliant with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) European upper tool: P97.75.R08 (one of them is split) European lower tool: M.460R.85 (one of them is split) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC-controlled motorized crowning 60mm die holder (only for European dies) Overhang 410 Adjustable support arms at the front with T-slot, strip stop and guide along the entire length Rear stop: Siemens DC servo motor & linear guide & ball screw system Support arms: 2 pcs Stop fingers: 2 pcs With foot pedal Oil capacity: 100 l Fpodpfx Ajd R Dhpjfusn Price is valid ex Staufenberg. The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Working length: 2500 mm Working width: 1200 mm Clamping force at 8 bar: 2600 kg Fsdpfjzhv Tyex Afuopn 2x side clamping Pneumatic control CE certified

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Fpedowyplcjpfx Afujn Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL Fpodsdzqmzepfx Afusn - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Fpjdpfxsz Nkuae Afuen Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: good (used), Karl Krause Hot stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Extendable work table. Fpodpfxozz Hifo Afuen Timer control allows the machine to be started at a specific time to ensure it is ready for operation. 380V power supply. Heating plate size: 400x530mm. Weight: approx. 800kg.

Condition: good (used), Year of construction: 2016, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66T Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66T graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66T Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66T graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in good condition. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66T Graphic CNC Control Condition: Good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm Fpsdpezdak Aefx Afusn R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66T graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Fedpfx Afsz Rk N Heujpn Pressure: 3 tons Made in Germany.

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Fodpotqwtdofx Afuspn Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: good (used), 200 bar / Class 1 / D9KA Application: Gas filling systems Width: 185 mm Height: 210 mm Depth: 60 mm Weight: 1176 g Fpjdpfx Aszfy U Aefusn Condition: good, second-hand

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC Fpjdpfx Afeqwycleuen X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Fjdpfx Afez Rk Rkouepn Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, Year of construction: 2006, Item: AV-12167-AV2168-50m3 Pressure Tank Capacity: 49,900 L Exterior Dimensions: Diameter Ø 3500/3550 mm, Total Height 6200 mm. Used, vertical, identical stainless steel pressure tanks – 2 pcs. Insulated with Armaflex. Ø 600 mm manhole located in the lower part of the cylinder. Year of manufacture: 2006 Test Pressure: 2.86 bar Material: AISI 304 Vertical Stainless Steel Pressure Tank – 49,900 L (TÄNKKI, Finland) High-quality vertical pressure vessel manufactured by TÄNKKI Oy, Ähtäri, Finland. Constructed in accordance with EN 13445-3 and CE certified (Notified Body 0875) for use with non-hazardous liquids (Group 2). Technical Specifications Manufacturer: TÄNKKI Oy, Ähtäri, Finland Year of manufacture: 2006 Serial number: 2344/06 Volume: 49,900 liters (≈ 49.9 m³) Design pressure: 2.0 bar(g) Test pressure: 2.86 bar(g) Temperature range: 0 °C to +50 °C Fsdpfx Afov Tnqlsuspn Design standard: EN 13445-3 (PED compliant) Media group: 2 (non-hazardous liquids) Orientation: Vertical, self-supporting construction Description This vertical stainless steel pressure tank is engineered for low-pressure storage and processing applications, making it ideal for water, milk, whey, or other food and process liquids. The tank is constructed from premium-grade stainless steel, guaranteeing long service life, durability, and full compliance with EU PED regulations.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich construction, roof vent Equipment: - 4 urinals - 4 toilets Net price: 32,596.64 € / Gross price: 38,790.00 € Article number: WCE227562122.01 Technical data: • Brand: Vezeko • Model: WC E 27.56 • Vehicle type: Special trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 563 x 217 x 223 cm • External dimensions (LxWxH): 714 x 232 x 298 cm • Permissible total weight: 2,700 kg • Unladen weight: 2,276 kg • Payload: 424 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION Fpodpfx Aez Ri Egofujn • High-quality grey PVC flooring • 4 stable heavy-duty crank supports incl. crank for secure positioning • LED exterior lighting for the entrance area • Concealed pipe routing • Two-part side wall flap consisting of a fold-out stair area and a fold-out canopy for the entrance area • 3-step staircase made of aluminum tread plate incl. lifting aid • Fold-out and lockable side railing on the left and right next to the staircase • Low-frame chassis with 10-inch tires ensures comfortable access • Sturdy sandwich panel body with 50 mm polyurethane core and hot-dip galvanized and powder-coated outer and inner walls (insulated) • Exterior color: silver • 3 service flaps on the driver's side • 4 stable maneuvering handles • Lockable doors • Rear frame and edge profiles made of special aluminum profiles • Additional reinforced automatic support wheel • Reversing assistance system • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • _____ • Women's area equipment: • 3 toilet cubicles, each with a water-flushing, wall-mounted toilet • 1 stainless steel toilet paper holder per cubicle • 1 washbasin with double sink incl. cabinet for additional storage space • 2 sensor-operated faucets ensure contactless use • 10-liter hot water boiler • Paper towel dispenser • Roof hatch with integrated fly screen and sun protection • LED interior lighting • Electric heating • Large mirror above the washbasin • Floor drains for easy interior cleaning • _____ • Men's area equipment: • 1 toilet with a water-flushing, wall-mounted toilet • 1 stainless steel toilet paper holder • 4 urinals with contactless automatic flushing • Partition walls between the urinals • 1 holder for toilet paper rolls in stainless steel • 1 washbasin with double sink incl. cabinet for additional storage space • 2 sensor-operated faucets ensure contactless use • 10-liter hot water boiler • Paper towel dispenser • Roof hatch with integrated fly screen and sun protection • LED interior lighting • Electric heating • Large mirror above the washbasin • Floor drains for easy interior cleaning • _____ • Technical room equipment: • Fuse box • Power inlet 400V 16A incl. 20m cable • Fresh water connection incl. GEKA coupling in 3/4 inch, incl. 20 m hose • 110 mm outlet pipe

Condition: new, 4 glueing poles, 1 pressing bar, hydraulic, external sizes L x H 3000 x 2000 mm, ca. 200 kg Fpjdpfx Afevrv H Ssusn

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Fpodpfx Afektm N Djuen

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Fpedpfxoz N Shho Afujn Weight 650 kg Flow table, system of claws holding the sheet. Electrically driven spreading roller.

Year of construction: 2002, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil and diesel. Nominal capacity: 50 cbm Quantity: 1 Used, but fully refurbished, meaning the tank has been cleaned, reworked, primed, and painted. Color: RAL paint; however, you can also specify your own desired color at any time. Material: Steel in steel, material S235JRG2 Documentation: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent Quantity: 1 fill pipe Quantity: 1 new limit switch Quantity: 1 new leak detector with leak detection fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage tank with feet/console Tank dimensions: Length approx. 8,220 mm, diameter approx. 2,900 mm Weight: approx. 8,000 kg Storage: Above ground Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. Fsdpfsc Nkx Uox Afuopn We also offer a cost-effective delivery service upon request. Inspection of our systems is possible at any time. We have a range of other tank systems for above-ground and underground storage in all sizes, which are available for sale on our premises. All our tank systems can also be offered without a diesel pump. Special offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Water tank/firewater tank also available. Price/Shipping The price for the tank system is ex works Warstein, unloaded. Delivery can be offered at a reasonable cost for an additional charge. Delivery time: immediate You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: new, Professional Stainless Steel Heavy-Duty Cabinet Extremely robust and deep stainless steel cabinet in top industrial quality. This is a special edition that is hardly available on the market in this generous size and depth! The cabinet is ideal for the food industry, commercial kitchens, butcher shops, laboratories, workshops, or discerning private users where hygiene, maximum storage space, and enormous stability are paramount. Thanks to the high-quality stainless steel construction, the cabinet is absolutely resistant to water, water vapor, food acids, as well as organic and inorganic acids. Rare special size: 1800 x 1500 x 670 mm (height x width x depth) – particularly deep design for maximum storage space, also ideal for large boxes and containers! Enormous load capacity: A substantial 200 kg load capacity per shelf (heavy-duty design). Flexible storage space: Includes 4 height-adjustable shelves to customize the shelf heights to your needs. Well-thought-out space division (3-door): Left & Right: Robust storage cabinets / material compartments with adjustable shelves. Center: Wardrobe compartment with integrated clothes rail and sturdy hooks for clean hanging of clothing or equipment. Hygienic base: Integrated, closed 150 mm U-shaped plinth. It completely seals the space to the floor – no dirt traps, absolutely flush with the floor, and easy to clean (HACCP compliant). Doors: Easy-to-open hinged doors with an ergonomic, continuous handle bar. "Everything from one source: We would be happy to offer you suitable bank financing for your project." Fpodpszwlnlefx Afuen More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Letterpress printing press, foot operated Made in Germany Fully original machine. A brilliant looking exhibit to put in a company lobby. Fodpfxsz N Sg Rs Afujpn A manually added piston. Rollers Format of the pressure 35x24cm