Used Lisec Butyl Extruder for sale (448)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM Pgjdpfotqu Disx Ag Dok The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications Pgsdpfx Astziudjg Djk This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Pgjdpfx Agjvuzqze Dok Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Year of construction: 1997, operating hours: 31,850 h, condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI - Type: Titan 45 - Conical screws Ø45mm Pgsdjv D Nzmepfx Ag Dek - Year: 1997 - 31850 operating hours - Engine power: 15kW - Flow rate: 120kg/h - Replacement motor - Replacement vacuum pump - Replacement material feed screw

Condition: good (used), Krispy Kreme machine in lovely condition. Try and find another, probably the only one for sale in Europe and in much nicer condition than the ones for sale in the US. Pgsdpfx Agsvtg U Ae Dok

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off Pedpfx Agjrg Ebco Djgk - Control system

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 30 L/D – with K-Tron Twin Screw Feeder – Strand Die For sale is a fully functional Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Pgedpjyi Am Rjfx Ag Dsk Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm • Process length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) • Compact control cabinet with digital temperature control • Strand die adapted Features: • K-Tron twin screw feeder • Compact, clearly arranged control unit • Multiple heating zones with individual control • Melt temperature & melt pressure monitoring Condition: • Fully functional • Well-maintained overall condition • Ready for immediate use A trial run with customer material is available upon prior arrangement.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Screws ø 90-36D, 45-30D, 45-36D Compact design, one shared control cabinet, approx. 800 kg/h Pjdsyilykjpfx Ag Degk

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Podpfx Ajduyyzog Djgk

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Pgedoxq Exqjpfx Ag Dek

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Pgsdpfx Agov Uz Aws Dok

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Psdpfjvw Aqhox Ag Djgk

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Psdpjxn S Umjfx Ag Djgk

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Pedpfx Asx Hifveg Dsgk

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Pgodohtvmhopfx Ag Dsk

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Podpfshz Dyajx Ag Djgk

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Pgjdpfxjvy It To Ag Dok Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: used, Year of construction: 2008, The MAXDROP type machine is used for the production of various pastry products such as muffins, shortcrust biscuits, meringue cookies, sponge cakes, and others. Brand: MaxDrop 2000 Model: AL 200 Head width: 600 mm Recipe memory: up to 90 recipes Machine dimensions: 1100 x 1400 x 1375 mm Year of manufacture: 2008 Power supply: 400 V Installed power: 1.64 kW Weight: 400 kg Pgsdex Irkdepfx Ag Djk Condition: used Original technical documentation + CE declaration.

Year of construction: 2016, condition: good (used), functionality: fully functional, Farmet FE500 extruder for soybean, other oilseed, grain, pet food etc, in good condition, complete with command box. Pjdpfxjxfc Uxo Ag Degk Motor 55kw Capacity 500-750kg/h

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Pgsdpfx Asxnpx Nog Dek

Condition: refurbished (used), functionality: fully functional, - Rieter extruder type SP 560/500 with double-shaft mixer type VDWM2107. Diameter 560x500, capacity 25 m3/h, 30 bar; - Rieter extruder type SP 500/500 with double-shaft mixer type VWM3. Screw diameter 500, capacity 20 m3/h; - Rieter Extruder OPTIMAT 600-560, capacity 32 m3/h, 25 bar; - Rieter Extruder type SP 650-600, capacity 65 t/h; Pgjdpfjyk Rwaex Ag Dsk - Rieter extruder type UR4, capacity 35 t/h; - Haendle extruder type PZG 56a/50 with mixer type MDVG920, capacity max. up to 30 m3/h, 30 bar; - Haendle extruder type PZG 56a/40 with mixer type MDVG715, capacity 19 m3/h; - Haendle Extruder type PZG60b56 with mixer type MDVG920b, capacity 32 m3/h, 24 bar; - Haendle Extruder type PZG60b50 with mixer MDVG920a, capacity 29 m3/h, 30 bar; - Petersen extruder VAP 65, 650x560, 2008. Capacity approx. 60 t/h, maximum pressure 55 bar; - Breitenbach Extruder type VAP50 with double-shaft mixer, capacity 40 t/h; - Ishikawa extruder type E-45S, Y-1 with mixer Takasago, capacity 25-30 t/h. - Double-shaft mixer by Haendle type MDVG 715, 915, 920a, 1025; - Planetary mixer by O.M.G. Officine Meccaniche Galletti type P 500

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: Pgodeyhd Dbspfx Ag Dek - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Podpjibikwjfx Ag Degk Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change. Pgjdpjx Sq I Nofx Ag Dek

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. Pgedpfx Ageyg Egho Dek The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.