Used Wmw Niles Vertical Lathe for sale (12,820)

Condition: ready for operation (used), Year of construction: 2006, A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. Dcsdordhh Iepfx Aqceh

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Dcodpfxoygx D He Aqcoh Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Year of construction: 1999, condition: ready for operation (used), There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. Dodpom H Urhefx Aqcsch

Year of construction: 2004, condition: ready for operation (used), X-travel: 200mm, z-travel: 650mm, W-travel: 750mm, swing diameter over slide: 265mm, center distance: 650mm, max. turning length: 650mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 7.2t, with documentation. Dodpoldf Exsfx Aqcech

Year of construction: 2005, condition: ready for operation (used), X-travel: 200mm, z-travel: 400mm, W-travel: 670mm, swing diameter over slide: 300mm, center distance: 600mm, max. turning length: 350mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 6t, with documentation. Dodpfx Aeldf E Heqcech

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machiningcenter Dörries Scharmann Type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm Dsdpfx Aogulkijqcjch ATC 70 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993 (2/2)

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Dodpsguk S Ssfx Aqcoch Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Vertical turning lathe with a 2,200 mm table diameter and an approx. 2,500 mm swing diameter. The base machine is from the Chinese manufacturer QQHR (well-known manufacturer). The entire electrical system, including the main motor, servo drives, control cabinet, and PLC, was completely renewed and professionally overhauled by Paulmann (Germany) in 2017. Dedeycgxkjpfx Aqcjch

Condition: used, Year of construction: 1980, turning diameter 7000 mm Dcjdpfxjuddlze Aqcsh faceplate diameter 3500 mm workpiece height 3000 mm 160 mm 1998 Control Siemens 840 C max. table load 60000 kg electr. connected load 400 V Serial number 11 33 0051 total power requirement 71 kW weight of the machine ca. / t required space 13 x 6 m The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² Dedpouddcgsfx Aqcech +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, Year of construction: 1962, faceplate diameter 2250 mm swing diameter 4500 mm Dcedsuc Aldjpfx Aqcsh turning height 2000 mm turning diameter 3150 mm workpiece weight max. 25000 kg total power requirement 55 kW weight of the machine ca. ca. 32 t required space / m

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm Djdpfx Aqsuddnvocsch workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Dedpfx Aqouddpgjcech Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Dcjdpfx Asxg Nmksqceh Maximum height under crossrail: 900/1200 mm Slide travel (X-axis): 1000 mm Main drive motor: 41 kW Tool changer: 30 positions Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW Dodovb Hlwspfx Aqcsch with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: used, Technical details: faceplate diameter: 1600 mm swing diameter: 1800 mm turning height: 1500 mm max. ram stroke: 1200 mm faceplate turning speed range -stepless-: 2,5 - 250 U/min workpiece weight max.: 10.000 kg ram head dimension: 240 x 240 mm feed range: 1 - 3000 mm/min power capacity: 45 kW Dcedpfx Aqsv Uw Trjcsh weight of the machine ca.: 20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders *

Condition: used, Retrofit: 2006 Faceplate diameter: 6000 mm Turning diameter: 6500 mm Turning height: 4000 mm Support travel vertical: 2000 mm Support travel horizontal: 3250 mm Workpiece weight: approx. 80 tons Machine weight: approx. 220 tons Dcjdsvk Tmgepfx Aqcsh

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -2 step main gear -24 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -tool magazine -machine housing Dsded I Au Repfx Aqcoch -chip conveyor -cooling water preparation -Side support -... CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 4,200 mm, feed length X-axis: 4,700 mm, feed length Z-axis: 2,000 mm, faceplate diameter: 4,000 mm, feed rate X-axis: 25 m/min, feed rate Z-axis: 15 m/min, rotary table diameter: 4,000 mm, rotational speed (max.): 100 rpm, torque: 128,000 Nm, spindle speed (min.): 3,000 rpm, table load: 50,000 kg, power: 100 kW (135.96 HP), Equipment: rotational speed infinitely variable, TECHNICAL DATA: Machining diameter 4200 mm Max. workpiece height 3000 mm Max. workpiece weight 50,000 kg Faceplate diameter 4000 mm Faceplate speed range 0-30/0-100 rpm Dcedoq Ny Dtepfx Aqcjh Max. faceplate torque 128,000 Nm Main drive power 75/90 kW EQUIPMENT: -1-2 support configuration -Machine enclosure -Chip conveyor -Cooling water preparation -C-axis -Fork head -Driven tools/BT50 -Bellows cover -Central lubrication SKF/VOGEL -12-month warranty -Complete electrical equipment 230/400 V, 50 Hz, Made in Germany, CE standard CONTROL: FAGOR or SIEMENS OTHER: Geometry acceptance according to DIN 8609-3

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600(1800*)mm Max. workpiece height 1000(1500*)mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200(0-315*)rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2(3*) step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm Dsdpfxscx Rv Hj Aqcech OPTIONS: -Capto tool holder system -tool magazine -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: like new (used), Year of construction: 2026, TECHNICAL DATA: Machining diameter 2000mm Max. workpiece height 1200mm Max. workpiece weight 8000kg Faceplate diameter 1800mm Faceplate speed range/4 automatic steps 0-210rpm Max. faceplate torque 31500Nm Main drive power 55kW EQUIPMENT: -4-station turret or quill support with 2 Capto clamping units -Central lubrication SKF/VOGEL -Commissioning including training -12-month warranty -Complete electrical equipment 230/400V, 50Hz, Made in Germany, CE standard OPTIONS: -Tool holders -Tool change system (10 stations) -Machine enclosure -Chip conveyor Dodpfx Aef S Hcyeqcoch -Cooling water preparation -Side support -Machine version with quill and 2x Capto C6 -... CONTROL: CNC cycle control Fagor 8037TC/8055TC* or Siemens OTHER: CE Declaration of Conformity Geometry approval according to DIN 8609-2

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: Dcjdpfxecxi A Sj Aqceh -5-fold turret -Version .300 - 2 step main gear -Side support -4 axis digital display (ACU-RITE / FAGOR) -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm CONTROL: kconventional/SPS Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, Machine NEW! Geometry acceptance according to DIN8609 Warranty 12 months for all damages Control:conventional/SPS Siemens faceplate control 4-axis digital display Fa.Fagor/ACU-RITE or Heidenhain complete electrical equipment 230/400V,50Hz,german make,CE-Norm Djdocht Tnspfx Aqcjch Technical data: Max. Workpiece dimensions: - Diameter mm 3200 - Height mm 1600(up to 2600 possible*) Max. Workpiece weight kg 16000 Face plate diameter mm 2800 Max. stroke length - horizontal mm 1720 - vertical mm 1200 Number of stages of faceplate rotation 18 Face plate speeds PLC Siemens or stepless(2 steps) Lenze control rpm 1,6-63/0-80 Support working feed number of steps 18 Speed of cross beam adjustment mm/min. 360 Max. Support line adjustment speed mm/min. 2000 Max. Faceplate torque kN/m 67 Main drive power kW 55/75 Dimensions (LxWxH) mm 5490x7075x5100 Weight kg 43.000

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support Dedpfx Asrcivgeqcoch -... CONTROL: Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: refurbished (used), Year of construction: 2005, NEW MACHINE TECHNICAL DATA: Dedpjlin Rcofx Aqcjch Working diameter 3200mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2800mm Face plate rotation speed 0-80U/min Max. torque on face plate 67000Nm Performance of main drive 75kW SETTINGS: -2 supports -3-fold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing inkl. -chip conveyor -cooling water preparation -Turret -driven tools -... CONTROL: FAGOR 8055TC OTHER: Geometrie-Abnahme nach DIN8609 CE Deklaration