Used Casadei (Scm) Single Edge Bander for sale (12,388)

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Bdodpfxjt Hal Dj Ahmeh Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, actuation type: electric, total height: 1,500 mm, total length: 3,200 mm, total width: 1,100 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, – Made in Italy – Year of manufacture: 2018 – Preliminary milling – Technical documentation, CE marking TECHNICAL SPECIFICATIONS: Bodpjzzzr Iofx Ahmsdh – Edge thickness: 0.5 - 3 mm – Wood veneer thickness: 0.5 - 5 mm – Element height: 8 - 50 mm – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed rate: 7 m/min – Operating temperature: 190° - 220° – Preliminary milling – Glue application roller – Guillotine for preliminary edge trimming – Saws for final edge trimming (front/rear) – Milling (top/bottom) – Radius edging – Straight edging – Polishing units – Air blow for each unit – Operating pressure: 6 - 8 bar – Table height from base: 900 mm – Nozzle diameter: 2x 60 mm and 2x 80 mm – Transport dimensions (L/W/H): 320 / 90 / 150 cm – Weight: ~650 kg

Condition: used, Year of construction: 2011, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Colour: Grey Weight: 3.500 kg - Year: 2011 - Documentation available: No Bodpeyudwzofx Ahmsdh - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, PLC control Panel height mm 10-60 Bdedpfx Aeu Tyx Aehmeh Solid mm 15 Pvc / Abs mm 3 Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Gluing unit for EVA glue with pre-melter Edge pressure unit End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush unit

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Bdjdpfx Aotxtzkohmjh Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Bdedpfjzku Rpsx Ahmjh Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, Year of construction: 2011, workpiece height (max.): 50 mm, working width: 1,300 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Bdedpoz Ekggsfx Ahmeh Motor power: 6.6 kW Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION max 2-3 hours , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WORKING STATIONS: TECHNICAL DATA: 1. Left+right cutter 2. Roller glue application 3. Front and rear saw 4. Straight cutter also for solid laminates 5. ⁠Angle cutter 6. ⁠Rondomat front, rear, top, bottom 7. ⁠Straight wedge cutter 8. ⁠Wedge cutter with radius 9. ⁠ Dryer WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS Bdjdjvi Rd Tjpfx Ahmjh MACHINE LENGHT APPROX 7 METERS WEIGHT : 3500 KG

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Bjdpfx Ahsy Spclsmjdh Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: used, Year of construction: 1999, functionality: fully functional, Well-maintained and refurbished SCM edgebander type K208 TERL available in our warehouse. The machine is in very good condition and fully equipped, including: DIA pre-milling cutters Pair of end trimming units Pair of rough straight milling cutters Pair of fine tilting milling cutters Rondomat with 2 motors Radius scrapers Brushes The machine has been carefully maintained and is ready for operation. Price: €8,900 + VAT Bsdeylxxnopfx Ahmjdh

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Panels thickness (min/max) mm 8 / 60 Bdodpfx Ahezyahxjmoh Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Buffing unit (2 x Kw 0,09)

Condition: excellent (used), A) SINGLE SIDE EDGE BANDER (Left) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 20 Panels thickness (min/max) mm 8 - 60 Numerical Control POWER Control PC 22 Bdodpfx Ajzx Eh Ijhmoh Spraying unit (Antisticking liquid) Infeed fence, adjustable by N.C. Panels infeed system Pre-milling Unit (vertical joint trimmers) adjustable by N.C. type KAL 300 (Kw 3 x 2) Glueing Unit (P.U.R. Glue + Quick Melt unit) PU 34 / QA 34 Band Pressure zone (adjustable by N.C.) "C" Edge coils supporting unit, N° 6 reels Snipping (endcutting) unit HL 86 Servo (Kw 0,4 x 2) 35 m/min Rough Trimming unit Optimat (Kw 1,5 x 2) Fine Trimming unit ALUKANTE (Kw 0,4 x 2) adjustable by N.C. Spraying Unit (for sliding liquid) Multi Function Unit (Profile contour Trimming unit) FK 13 Servo (Kw 0,4 x 2) Profile edge scraping unit (Multiprofile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid) B) Workpieces Return system "LIGMATECH" ZHR 05/L/095

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 15 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 18 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) A12 Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit (2 x Kw 0,35) pneu Bdodpfx Ahjzyaiijmeh Rough Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (2 x Kw 0,4) Profile edge scraping unit (fast-release) Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit (2 x Kw 0,18)

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW Bedpjrx S Ipjfx Ahmsdh - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Panels thickness (min/max) 8 mm. 40 mm (with MFA) / 60 mm (without MFA) Numerical Control / Software ICOS Open Adjustable feeding speed (m/min ) 6 - 30 Top pressure system with driven rubber belt Spraying unit (Anti-sticking liquid) In-feed fence Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66) 0°-25° (max 30 m/min) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) by N.C. 08.342 (2 x Kw 0,66) servo Profile Scraping unit 08.519 Glue scraping unit 08.50 Bjdpfx Ahsr Ttflomsdh Buffing unit 08.617 (2 x Kw 0,25) Milling grooving unit 08.190 (1 x Kw 4,5)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 80 Edges thickness in stips / lippings (min/max) mm 0,4 / 20 Numerical Control NC21 Feeding speed m/min 18 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Bdjdpfsl Iz Tusx Ahmeh Glueing Unit (Hot Melt Glue + Quick Melt system) A20 + A34 Band Pressure zone "C" Edge coils supporting unit (No. 1 reel) Snipping (end-cutting) WK 14 (KW 0.8x2 motors at RPM 12000), pneum. adjust. chamfer/straight Rough Trimming unit Optimat (2 x Kw 1,5) Fine Trimming unit MF20 (2 x kw 0,55) Corners Rounding (contour trimming) Unit FF12 (4 x Kw 0,4) CNC (WD40) Free space for Profile Scraping unit Finish processing unit ( Glue scraper + Buffing unit) FA 10

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Bdedpfx Ajgbug Nehmsh Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: used, Year of construction: 2017, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Colour: Grey - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes Bdsdpfxjyll Sns Ahmjh - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Bdodpjm Udfwefx Ahmsh Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No. 6 reels) Bdjdpsd Scydofx Ahmsh Snipping (end-cutting) unit 08.42/30/B (Kw 0,2 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi Function Unit (Profile contour Trimming unit) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 08.190 (1 x Kwv 4,5) CNC (90° / 180° / 270°) CNC

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Bjdpjd Nt Nqjfx Ahmedh Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control Power Control 22 Feeding speed m/min 18 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) QA 34 + PU 34 Band Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Pneu (2 pos.) Rough Trimming unit Optimat (2 x Kw 0,55) Multi Function Unit (Profile contour Trimming unit) FK 13 (2 x Kw 0,4) CNC (revolver 8+8 pos.) Profile edge scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit ( Glue scraper + Buffing unit) FA 11 (Pneu) OPTIONAL: Panels Return System "LIGMATECH" Mod. ZHR 05/L/075 (SOFIT code Z02007)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Bdjdpfoflc Uhex Ahmjh Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Bdsdjidqphjpfx Ahmsh Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: excellent (used), 203018) SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Bdodpfx Ajyyvp Uehmeh Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 203019) Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Grinding group Lamps to heat the edge of the panel Bdjdpjgiyn Ijfx Ahmoh 6-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Gluing unit with 2 tilting motors electronically adjustable by C.N. Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Free space for the possible insertion of another work group Edge scraper group Oscillating brush group