Used Guang Dong Slitting Line for sale (9,487)

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” Lrsdpfx Aetiy Ntjkuol 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Ledpsrn Sqhjfx Akusrl Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Lrjdjihf Ufspfx Akuol Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator Lsdpfxslwtzyo Akujrl 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS Ljdpfx Asthg Diekujrl UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Lsdeihf Twepfx Akuorl Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: good (used), Year of construction: 2017, Modular line for unwinding, slitting, and cutting to length. Industrial processing of electrical steel sheets into small laminations for transformer manufacturing. Function: unwinding, slitting, and cutting to length. Lodey Tcw Ejpfx Akuorl

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm No. of strips: max. 11 Lredpfx Asy Nypkokujl coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: used, Year of construction: 2002, For sale: a professional combined coil metal processing line by Finnish manufacturer Macring / Sintech, manufactured in 2002. This line is designed for uncoiling, leveling, longitudinal slitting, sheet cutting, and recoiling of coiled metal into smaller coils. The equipment is suitable for precision cutting of metal up to 1500 mm in width. The machine is currently dismantled; however, all connection elements are labeled, which makes recommissioning and assembly easier. The line is operated via a hydraulic system. Line configuration: - Uncoiler – 8 T - Metal leveling segment - Longitudinal slitting unit - Spare slitting knives - Sheet cutting guillotine - Braking and separating segment - Turnstile with separator - Recoiler – 8 T - Control panel - Electrical cabinet - Lifting/lowering table - Safety fences Technical specifications: Lrodpfx Aoy N Sqgokujl - Maximum metal width: 1500 mm - Maximum coil weight: 8 T This equipment is suitable for sheet metal processing as well as the production of ventilation, roofing, façade, and other metalworking products. If you have any additional questions, we will be happy to answer them.

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Lrjdpfxeyzbzrj Akuel Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. Lrjdpfx Aowd E N Eskusl NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Lrjdpfx Aoxlcp Njkuel Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, Year of construction: 2022, functionality: fully functional, nuSLIT STRAIGHT PROCUT PRINT Year of manufacture: 2022 – factory reconditioned Manufacturer: Forstner Features: - Control system: Siemens SPS-F3 - Speed: 45 m/min - Standard entry shaft - Standard entry table Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitter knife pairs: 5 pairs - Slitter knife type: Stainless steel Cross cutting: - Sectional shear (PROCUT) – waste optimization through step cuts - Shear knife type: Stainless steel - Motorized sheet shear discharge Incl. film unwinding device with fully rubber-coated feed rollers Labeling machine: - Automatic labeler Lsdpswbh S Refx Akusrl Software: nuIT Connection

Condition: like new (used), Year of construction: 2025, functionality: fully functional, FORSTNER nuSLIT longitudinal slitting and cut-to-length line, year 2025. The machine is in excellent condition and fully operational. It was used only at several exhibitions and in a demo center. The machine is designed for longitudinal slitting and sheet cutting operations. It is fully programmable, with automatic adjustment of the longitudinal slitting knives. Longitudinal slitting into 6 strips (5 pairs of knives) with the possibility to mount up to 7 pairs. Equipped with a modern F3 control system featuring a touchscreen interface, which allows easy programming of different lengths, widths, and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and enables precise, clean perpendicular cuts. Integrated material-saving function – the machine stops, the slitting knives are raised, and the sheet is automatically fed into the shears. Comes with complete technical documentation. Specification: Model: FORSTNER nuSLIT 1250 Made in: Austria Year: 2025 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Cutting: rotary shears Controller: F3 Ledpfxjy Dfnno Akujrl Other features: automatically adjustable longitudinal slitting knives If you have any further questions, we will be happy to assist you.

Year of construction: 1987, condition: good (used), Manufacturer - Cams Shefield Lrodpegk Nu Hsfx Akuel Year - 1987 Speed - up to 80 m/min. Width of sheet - 1250 mm Thicknes - up to 6 mm Coiler capacity - 12 tons

Year of construction: 2003, condition: excellent (used), functionality: fully functional, strip width: max. 1.500 mm Lrsdpfsrazyqsx Akujl strip thickness: 0,5 - 2 mm coil weight: max. 7 t mandrel Ø: 508 mm

Year of construction: 2026, condition: new, Heavy-duty coil slitting line for thick materials with high precision, stable production and industrial performance. Bosporas Machinery is a manufacturer of coil processing lines, delivering high-performance and customized industrial solutions worldwide. This heavy-duty coil slitting line is designed for precise processing of thick gauge materials in demanding industrial applications. Engineered for stable operation, accurate slitting and continuous production, the system is ideal for companies requiring reliable performance with high-capacity coil handling. The line offers a complete turnkey solution from coil loading and decoiling to slitting, recoiling and finished coil output. ⚙️ TECHNICAL RANGE Material Thickness: 3 or 4 mm Coil Width: up to 1500 mm Coil Weight: up to 15 Ton High precision slitting performance Heavy-duty continuous operation capability 🔧 MAIN LINE COMPONENTS Hydraulic Coil Loading Car Hydraulic Decoiler (15 Ton) Infeed Straightener / Pinch Roller System Slitting Head with Precision Knife Adjustment Scrap Winder System Tension & Separator Unit Hydraulic Recoiler Hydraulic Coil Exit Car PLC & HMI Automation System ⚙️ ENGINEERING FEATURES Robust heavy-duty machine construction Precision slitting head with fine knife positioning Stable feeding and tension control system Reliable recoiling performance Servo-supported automation systems User-friendly operator interface Designed for long-term industrial production ⚡ OPERATIONAL ADVANTAGES Ideal for thick and heavy materials High production efficiency Stable and repeatable slit quality Reduced downtime and maintenance needs Turnkey project solution Short lead time compared to European manufacturers Lredpfjy Dtxnox Akusl 🏭 APPLICATION AREAS Steel service centers Heavy sheet metal processors Construction material manufacturers Automotive suppliers Industrial steel component production 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar slitting lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, layout drawings and technical details can be provided upon request.

Condition: used, Year of construction: 2022, sheet thickness steel (max.): 1 mm, blade shaft diameter: 100 mm, number of blades: 5, working width: 1,250 mm, FORSTNER SLIT CUT Longitudinal Cutting and Sheet Shearing Line, Year 2022 The machine is in excellent condition and fully operational. It has undergone comprehensive maintenance, and the longitudinal slitting knives have been sharpened. The line is designed for longitudinal slitting and cutting sheets to size. The machine is connected and can be demonstrated. Lsdpex R Tt Ssfx Akusrl Longitudinal slitting into 6 strips (5 pairs of knives), with the possibility to install up to 7 pairs. Equipped with a modern S1 control system with touchscreen, allowing for easy programming of different lengths and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and performs a perpendicular, clean cut. Integrated material-saving function: the machine stops, raises the cutting knives, and the sheet is automatically fed to the shears. Complete technical documentation included. Specification: Model: FORSTNER SLIT CUT 1250 Made in: Austria Year: 2022 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Shearing: rotary shears Controller: S1 If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2022, functionality: fully functional, sheet thickness steel (max.): 1 mm, Forstner nuSLIT PRO – Cross and longitudinal slitting line with automatic knife adjustment and guillotine shear Year of manufacture: 2022 – factory overhauled Manufacturer: Forstner Equipment: - Control: Siemens SPS-F3 - Speed: 45 m/min - Standard entry shaft - Standard feeding table Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitting knives: 5 pairs Lrodpfjyw Hxhjx Akujl - Slitting knife type: Stainless steel Cross cutting: - Guillotine shear – cross cutting up to 1.5 mm steel possible - Knife type: Stainless steel The machine is being sold because the customer has purchased a new Forstner Coil Cell.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, number of straightening rollers: 4, conveyor belt width: 1,250 mm, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 15 mm, Automatic slitting line Slinet S1.5 with lifting system for 16 coils automatic knife adjustment with 6 slitting knives cross-cutting by partial rotary shear for scrap optimization (step cuts) Lodpfxjywudxj Akuerl automatic straightening unit with 4 rollers automatic label printer automatic scrap optimization software Max. cutting capacity: Steel 400N/mm2: 1.50mm with 4 slitting knives Stainless steel 550N/mm2: 1.00mm with 4 slitting knives Aluminium 190N/mm2: 2.00mm with 4 slitting knives The machine is currently located in Germany and can be inspected by appointment.

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness steel (max.): 1 mm, number of blades: 5, working width: 1,250 mm, number of feed rollers: 2, FORSTNER MST 1250 Longitudinal Slitting and Sheet Cutting Machine The machine is in very good condition and fully operational. Designed for longitudinal slitting and cutting into sheets. It is currently connected - can be tested on site. Longitudinal slitting into 6 strips (5 pairs of knives), with the option to mount up to 7 pairs. Control – Siemens SIMATIC touchscreen panel. Full documentation (PDF) included. Specifications: Model: FORSTNER MST 1250 Made in: Austria Year: 2010 Working width: 1250 mm Thickness: up to 1.0 mm Lodpfx Aex R Sk Nskuerl Slitting knives: 5 pairs Shearing: circular shears Controller: Siemens SIMATIC panel If you have any further questions, we will be happy to answer.

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Lrodpeywd Akefx Akusl Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. Lodpsxwc E Iofx Akuerl The system layout PDF is shown as a mirror image!

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Lsdetn Diepfx Akuerl 20 - 300 x 0,4 - 3,5 mm

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm Lrjdpfx Aegnygljkusl speed: approx. 60 m/min