Used Gurutzpe At 8000-600 for sale (22,470)

Condition: used, Year of construction: 1978, functionality: fully functional, spindle bore: 250 mm, overall weight: 11,000 kg, Brand: Gurutzpe Model: Super AT 8000/600 Distance between centers: 8,000mm Swing over bed: 1,200mm Swing over carriage: 910mm Spindle bore: 250mm Gap: - Maximum admissible diameter: 1,500mm - Length in front of spindle: 410mm Powered carriage Maximum load between centers: 3,500kg Maximum load with one steady rest: 4,400kg Maximum load with two steady rests: 5,300kg Kjdpfx Aijyc R I As Rjna Motor power: 15Hp Weight: 11,000kg Includes: - TdG 3-jaw chuck 520mm with internal, external, and soft jaws - Faceplate 1,100mm - Closed steady rest 500mm - Open steady rest with support 800mm - Open steady rest turret 100mm - Various lathe tools - 4-jaw chuck 700mm with 250mm spindle bore - 4-jaw chuck 800mm with 250mm spindle bore Year of lathe: 1978 *Original manual available

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Knjdpfowd D Itjx Ai Rea

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Ksdpsztz Hcsfx Ai Rjna

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 500 mm, spindle bore: 140 mm, turning diameter: 820 mm, turning diameter over bed slide: 800 mm, GURUTZPE Super AT 400/10000 lathe, with a wider bed than the standard model. This lathe has a 10,000 mm distance between centers and features a single headstock with a vortex system, designed for producing long-length spindles. It has a swing of 820 mm over the bed and 500 mm over the cross slide. The spindle bore diameter is 140 mm, and it can be equipped with a double chuck. It has 24 speeds ranging from 9-500 rpm, with a reduction gear providing speeds from 1-63 rpm. It is equipped with two steady rests and a universal 3-jaw chuck with a diameter of 630 mm. It is in very good overall condition. Ksdpfszmp Axjx Ai Rsna

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 76 mm, turning diameter: 800 mm, GURUTZPE Super AT 400/5000 lathe, with a 5,000 mm + 1,000 mm distance between centers, 820 mm swing over the bed, 550 mm swing over the cross slide, 1,150 mm swing over the tool rest, 76.5 mm spindle bore, 24 speeds from 9-500 rpm. It has a fixed steady rest and is equipped with a 3-jaw universal chuck with a diameter of 400 mm. It also comes with a separate 4-jaw independent chuck with a diameter of 600 mm. Overall, it is in good condition. Kodpfx Aezmp Afsi Rsna

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 72 mm, turning diameter: 820 mm, turning length: 2,000 mm, GURUTZPE lathe, Super AT 400/2000 model, with a 2,000 mm distance between centers, 820 mm swing over the bed, 550 mm swing over the cross slide, 1,150 mm swing over the tailstock, 140 mm spindle bore, and 24 speeds ranging from 9-500 rpm. It is equipped with a fixed steady rest and has a 3-jaw chuck with a 00 mm diameter mounted on it. Knedpfx Ajzbz Anei Rja

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 880 mm, spindle bore: 360 mm, turning diameter: 1,300 mm, turning diameter over bed slide: 1,600 mm, Gurutzpe Super RT-API Lathe Description Manufacturer: Gurutzpe Model: Super RT-API Machine type: Parallel lathe with automatic threading, ideal for oilfield and hydraulic companies Main capacities: Center height: 650 mm Distance between centers: 8000 mm Swing over bed: 1300 mm Swing over cross slide: 880 mm Swing over gap: 1600 mm Gap length from spindle nose: 410 mm Travels: Cross slide: 670 mm Toolpost slide: 200 mm Spindle: Spindle bore: Ø 360 mm Speeds: 24 (7–400 rpm) Kodpoxacn Isfx Ai Rena Leadscrew diameter: Ø 60 mm Automatic threading: 61 metric threads 81 Whitworth threads 47 modular threads 52 diameter pitch Automatic threading: 34 metric, 54 Whitworth, 20 modular, 27 pitch Feeds: Carriage with rapid traverses Main motor: Power: 25 HP Included components: 2 fixed steadies + 1 movable steady Front 4-jaw independent chuck Ø 800 mm Rear 4-jaw independent chuck Ø 800 mm Extra 4-jaw independent chuck Ø 1000 mm Quick-change toolpost FAGOR DRO Safety protections Other details: Machine weight: 12,500 kg + accessories Condition: Semi-new

Condition: good (used), functionality: fully functional, spindle bore: 76 mm, turning diameter: 1,020 mm, GURUTZPE lathe model Super AT 500/4000, with Fagor dimension display, 4,000 mm between points, turning on bed 1020 mm, on carriage 740 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed steady and mobile, assembled universal 3-claw chuck diameter 500mm, has 4 independent claws chuck diameter 900mm, several additional tools, very good condition in general Knedpfjt I Ubiex Ai Roa

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min Knsdpfx Aszkty Nei Rsa belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: like new (used), Mitutoyo Linear Scale AT 600 Kjdpfx Aeym Aiyji Rona New in original packaging

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Knsdpfxjv Rm Iwe Ai Rea

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 1 x 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. Kedpfx Aiszn Rcie Rsna KEY SPECIFICATIONS: Manufacturer: CERTUSS. Model: Universal 600 TC. Date of manufacture: 2021. Steam output: 600 kg/hour. Fuel: Propane (but can be converted). High-efficiency industrial steam generator. Compact vertical design. Fast start-up from cold. Automatic PLC control system. Complete steam generator package with ancillary equipment. Suitable for continuous industrial process steam applications. Condition: Excellent - very low working hours.

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Kodpfxozt H Ras Ai Rena Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: excellent (used), Year of construction: 1980, Gurutzpe Super BT lathe 700 x 6000 mm e.p, turning over bed 1380mm, over cross slide 1045mm, over neck 1770mm, neck length before plate 620mm, diameter of the spindle bore 102 mm , speeds 2.8-400rpm, 40cv motor, plate of 4 independent jaws with a diameter of 1200mm, with a fixed steady rest and a mobile one, bed width 800 mm, diameter of the tailstock axis 140mm, max weight on lathes between points 10tns with a steady rest 12tns, estimated weight of the lathe 17600kg, pre-owned lathe electrical panel in very good condition condition Knodpfsiqyv Isx Ai Rsa

Condition: ready for operation (used), functionality: fully functional, turning diameter: 1,700 mm, center height: 630 mm, center width: 4,000 mm, spindle speed (max.): 400 rpm, empty load weight: 4,000 kg, TECHNICAL DETAILS Centre height: 630 mm Swing diameter over bed: 1,300 mm Swing diameter over carriage: 1,000 mm Swing diameter over removable bed section: 1,700 mm Centre distance: 4,000 mm Bed width: 700 mm Spindle bore: 120 mm Spindle speed: 2.8 - 400 rpm MACHINE DETAILS Kodpfxjyua Ivs Ai Rena Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,800 x 2,200 x 2,000 mm Unladen weight: 11,000 kg Transport packages: 2 EQUIPMENT Documentation Three-jaw chuck Four-jaw chuck Removable bed section Quick-change tool holder Fixed steady rest Travelling steady rest

Condition: excellent (used), Otto Kremmling type oka Automata 600/7 Marzipan depositing and forming of soft mass. 25 kg blocks of Marzipan are put in squeezed through the roller and into the dies forms then goes into cooling system. Knedsylbz Sepfx Ai Rja

Condition: like new (used), Year of construction: 2004, operating hours: 6,090 h, load capacity: 8,000 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 4,100 mm, Manufacturer + model: KALMAR ECE 80 - 6 Mast: 2F5750 ID: 24051.5020 Kodpfx Aiozuubvs Rena Category: Used Mast: 2F5750 Forks: 2400 mm Lowered height: 4100 mm Lifting height: 5750 mm Capacity: 8000 kg Year: 2004 Operating hours: 6090 hrs Battery: 80 V / 1550 - NEW - Mfg. 09/2024 Options: - FULL cabin - LINDE steering - Duo pedal!!! - Spreader / S.s. - Spotlight - Duplex FFL mast - Completely NEW -> FEM 4 A - FORKS

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling machine, net price €68,800. Technical data: Kodpfx Aoytd S Nji Rjna Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle: 5.5 kW (7.5 HP) motor First right vertical spindle: Shared motor with the left vertical spindle: 11 kW (15 HP) First left vertical spindle: Shared motor with the 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First upper horizontal spindle: 7.5 kW (10 HP) motor Second upper horizontal spindle: 7.5 kW (10 HP) motor Second lower horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable: 5 - 30 m/min Motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles with high rotational accuracy. Standard equipment for PowerLock. Planing table length: 2 m (including a longitudinal guide) Marathon Coating for the machine table and guides Special coating for protecting the table segments and guides against excessive wear. Recommended for machining abrasive materials (e.g., tropical wood, MDF, chipboard). OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 mm Tool diameter max. 300 mm Tool length: 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R), and height (H), with display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW: PowerLock HSK63 adapter, shank D=50 x 260 mm 2. ROUTER HEADS WITH POWERLOCK MOUNTING, price €7,500 Two cabinets full of router heads for various applications, approximately 45 pieces.

Condition: good (used), Year of construction: 2020, BRONNEBERG FF600 Alligator Shear Compact, easily transportable alligator shear for effectively cutting and cleaning light metals. The Forfex-500 features a mechanically adjustable counter blade and a protected shear head. The protected shear head is operated with a mechanical foot pedal for single cuts or continuous cutting. This alligator shear is designed to provide the operator with an optimal view of the material being cut. The blades of the Forfex-500 shear can be rotated up to four times. Features: Easy to transport within your scrap yard Mouth opening and cutting speed adjustable. Simple adjustment of the desired mouth opening Equipped with an oil filter as standard Specifications Drive: Electric 400 Volt - 7.5 kW Cutting capacity: Ø 40 mm (St 37) Blade length: 500 mm Blade opening: max. 275 mm Dimensions: 1,850 x 700 x 1,500 mm Knodpezux S Sefx Ai Roa Weight: 1,135 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 119291, planing height: 160 mm, planing width: 260 mm, We are offering this well-maintained Weinig Powermat 600 planing and rabbeting machine, manufactured in 2014. Manufacturer: Weinig Model: Powermat 600 Year of manufacture: 2014 Ksdpfxezltp Tj Ai Rona Condition: good Machine type: Planing and rabbeting machine Zuani/Kanefusa tools for molding, window and door frame production (original price EUR 18,000) are included. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2020, operating hours: 6,333 h, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, battery voltage: 80 V, total height: 2,640 mm, total length: 2,980 mm, total width: 1,470 mm, color: other, Equipment: seat heater, Empty weight: 7.292 kg Battery type: PzS Lifting capacity: 4.000 kg CE mark: yes Technical condition: very good Knodpfx Asztr Anei Rsa Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Work lamp(s) = Remarks = General Country of production: Duitsland Battery from model year 2025!, Hydraulic fork positioner, 1600mm forks, enclosed cabin with heated seats

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Knedsyiflgopfx Ai Rja

Condition: ready for operation (used), Fanuc T15/8000 spindle motor A06B-0857-B928 # 3441 SN C03YK0711, professionally completely overhauled and tested with 12 months warranty, good condition, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kedpjrlw Nvsfx Ai Rena

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: DG11000SE, overall weight: 210 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 8 kW (10.88 HP), output frequency: 50 Hz, type of output current: three-phase, nominal power: 8 kW (10.88 HP), nominal power (apparent): 10 kVA, continuous power: 8 kW (10.88 HP), total length: 1,050 mm, total width: 700 mm, total height: 860 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the portable power generators for your uninterrupted power requirements. Newpower generator DG11000SE -3D model power generator The DG11000SE -3D power generator offers you a continuous output of 8 kW with its reliable 4-stroke 3000 rpm engine. You can operate the DG11000SE -3D power generator with its 30L tank for up to 8-10 hours. You can start the generator using the electric start or the cable pull. The starter battery is charged during operation, making it easy to start the next time you use it. TECHNICAL DATA Frequency (Hz): 50 Maximum power (kW): 8.0 Rated power (kW): 7.5 Nominal voltage (V): 230/400 Power factor (cosφ): 1.0 DC output: 12V/8.3A Power: single-phase-three-phase Generator type: self-excited alternator, 2-pole single-phase or three-phase Starting device: E-start or rope pull Noise level (7m): 70-73 dB Tank capacity (L): 30 Dimensions: 1050x700x860 mm Weight: 210kg ENGINE DATA Model: HR198FA Engine type: Diesel engine four-stroke, air-cooled, vertical cylinders Bore* stroke ( millimeters ): 98*84 Fuel: Diesel Oil lubrication Quantity (L): 2.0 Combustion system: Direct injection Functions Voltmeter: Yes Sockets: Yes Ksdpfx Astmuwiji Rona Circuit breaker: Yes Oil light and oil alarm: Yes Wheels: Yes DC switch: Optional Control unit: Optional ATS: Optional Remote control: Optional

Condition: used, Lippert belt conveyor GF 18000-770-650 RA2246 Technical data: Conveyor length (NL): 18000 mm frame width (NB): 770 mm belt width (GuB): 650 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Ksdpforkntyox Ai Rena For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics