Used Linck Linck Board Separator Se for sale (18,443)

Condition: ready for operation (used), Mitsubishi BN624A471G54B / SE-CPU2 control board, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpji Eb Ivjfx Abfouf

Condition: new, Board separator conveyor Outfeed after HewSaw Manufacturer / model: Drive experts UK CA Type: 3E100L4D-FC-A0-D36 Power: 3.0 kW RPM: Gusdpfx Abjyknpmefof ~1450 rpm (50 Hz) ~1750–1760 rpm (60 Hz)

Year of construction: 2015, condition: excellent (used), SPX Separator SE161HBIV for use in the Brewery Industry Technical data Width: 1.320 mm. Length: 2.100 mm. Height: 1.725 mm. Weights: Bowl weight: 95 kg. Separator weight: 470 kg. Net weight (with bowl) of separator unit on base frame: 930 kg. Operating features: Hydraulic capacity: 9.000 l/h * Minimum capacity: 2.000 l/h * Maximum capacity: 7.000 l/h Solids chamber capacity: 1,7 l Bowl speed: 11.000 r.p.m. Motor speed: 1.450 r.p.m. Product and process features: Maximum product density: 1,1 kg/dm3 Maximum sludge density: 1,35 kg/dm3 Maximum product temperature: 95 °C Minimum product temperature: 3 °C Electrical system features: Motor power: 11 kW Voltage: 3 x 400 V Auxiliary components voltage: 24 Ac/Dc Frequency: 50 Hz System: three-phase+earth Motor protection level: IP 55 Electrical panel protection level: IP 65 Godpfxeymyhte Abfouf Operation: electro-mechanical controlled by PLC Hydraulic system features: *Required feeding pressure necessary for a machine working at maximum capacity: 1,5 bar Minimum feeding pressure for operating water: 2 bar Operating water consumption for each discharge: 5 l Pneumatic system features: Maximum feeding pressure: 10 bar Operating pressure: 6 ÷ 8 bar Minimum feeding pressure: 4 bar Device has minimal hours worked. In very good condition. Can be viewed on location in Cork, IE

Condition: refurbished (used), Bone Separator Make: Baader Gujdpfx Abszr Rbasfjf Model: 603 Rated at 2200kg raw material per hr 3mm drum Overhauled with new bearings, bushes, seals, scraper, belt, Resharpened drum Renewed electrics Excellent condition, Ready to Go!

Condition: ready for operation (used), Bosch 1070068008-102 Servo i Module Circuit Board, Serial Number: 001453948, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Gujdpfxoi D T S Is Abfsf

Condition: ready for operation (used), Adept Technology 10337-15200 servo amplifier control robot board, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gjdpfx Asi D Tt Esbfjuf

Condition: new, Year of construction: 2026, The magnetic separator is an industrial device designed for continuous purification of coolants and oil-based fluids from ferromagnetic particles generated during machining processes. In closed-loop systems, it effectively removes metal chips and fine particles from the working medium, stabilizing cooling and lubrication parameters while reducing wear on pumps and installation components. Magnetic coolant separator – key benefits in maintaining clean machining fluids In production environments, coolant operating in a closed circulation system is constantly exposed to metallic contamination. Ferromagnetic particles act as an abrasive material – accelerating pump wear, causing deposits in channels and nozzles, and reducing the stability of the lubricating film. As a result, the risk of surface scratches increases, machining quality decreases, and downtime related to filtration and coolant replacement becomes more frequent. A magnetic separator for machining fluids solves this problem by automatically and continuously capturing metal particles without interrupting the production process. This allows the working medium to maintain consistent operating parameters, while the cooling system remains stable even under intensive working conditions. What do you gain by implementing a magnetic separator in a coolant system? Continuous coolant cleanliness – without the need to stop production. Protection of pumps and circulation components by reducing abrasive particle contamination. More stable machining quality (fewer scratches and improved process repeatability). Extended coolant service life and reduced disposal costs. Lower failure rates and reduced maintenance costs of filtration systems. Improved waste management – automatic removal of collected chips outside the working area. Why is magnetic separation more effective for removing ferromagnetic particles? Unlike traditional mechanical filters, which require periodic cleaning and may experience reduced flow due to filter clogging, magnetic separation operates continuously with minimal maintenance requirements. A magnetic coolant separator removes ferromagnetic particles consistently, maintaining stable fluid flow and high machine availability. Design and operating technology Gedpfx Aeycc Rpsbfjuf The device has been designed to mechanically and continuously separate metallic contaminants from process fluids. The main working element is a stainless-steel magnetic drum, which rotates and attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working area. The removal of collected particles is carried out by a shaft system: Magnetic shaft – responsible for capturing and holding metal particles during the separation process. Rubber-coated pressure shaft – stabilizes the removal of contaminants and assists in directing them into the waste container. Standard equipment Magnetic separator with stainless-steel magnetic drum Rubber-coated pressure shaft Working tank Electric drive Technical specifications Parameter Value Width of rubber-coated pressure shaft 140 mm Diameter of rubber-coated pressure shaft 65 mm Width of magnetic shaft 140 mm Diameter of magnetic shaft 110 mm Inlet connection 50 mm Outlet diameter 53 mm Motor power 0.25 kW Capacity up to 25 l/min Weight 35 kg

Condition: excellent (used), Year of construction: 2017, Baader 600 Separator Вaader 600 provides soft separation of raw meat material from a waste components – bones, skin etc. A flexible squeezing belt transports the product to a perforated drum. It gently squeezes the softer particles like meat and fat through the holes, then the harder particles such as bones, sinews and cartilage stays outside of the drum. Capacity: up to 400 kg per hour Gedpfexg Tdgsx Abfouf The throughput can vary in dependence of the drum hole size, product and its pre-treatment, the selected pressure etc. Baader 600 is а user-friendly machine. Its cleaning is easy and quick. The machine is built in accordance to worldwide recognised sanitary standards. A pressure system ensuring gentle product processing and reduced machine wear. Machine has castors for easy handling. Brand: Baader Model: 600 Year: 2017 Capacity: Up to 400 kg./hour Drum: 3 mm Power: 400V / 50Hz / 1,5kW Machine dimensions (LxWxH): 1.000x800x1.200 mm Machine weight: 230 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 2,000 kg, power: 2.2 kW (2.99 HP), 1200x910x310mm Magnetic Block Magnetic Intensity of 700 Gauss at a Distance of 250mm 3-Pole Magnetism Magnetically Isolated, Stainless Steel Body EP500/6 10mm Rubber Belt Gsbn Dztjzdccbow Tsuc 2.2 kW Belt Motor Guodpfjzdccbex Abfef

Condition: new, Year of construction: 2026, overall weight: 700 kg, power: 17 kW (23.11 HP), Mizar Zig-Zag Separators are designed to efficiently separate light and heavy materials using an air-based zig-zag flow system. This advanced technology ensures a high level of precision in material separation, making it ideal for plastic, metal, and composite recycling processes. ✅ Efficient Airflow Technology – Effectively separates materials based on weight and density. ✅ High Precision & Consistency – Ensures accurate sorting for optimal recycling results. ✅ Energy-Efficient & Durable – Designed for long-term industrial use. ✅ Easy Integration – Compatible with existing recycling systems. 🔸 Technical Specifications Gedov Hm I Njpfx Abfouf 🔹 ZZS M1 Power: 17 kW Length: 2000 mm Width: 1250 mm Height: 4180 mm Weight: 700 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,800 mm, total length: 18,000 mm, Float-sink separator for separating different types of plastics using density separation. Working width: 1,800 mm Working length: 9,000 mm Gedszc Eklopfx Abfouf Overall length: 18,000 mm 2 deflector plates at 45° Trough made of stainless steel (1.4571) Chain conveyor with plastic pushers, drive 2.2 kW 2 immersion rollers made of stainless steel (1.4571) including mechanical water level control If required, a feed hopper and a lightweight material extraction system can be included.

Condition: new, Siemens 6FC5114-0AA02-0AA2 Central Service Board Version: T Serial number: T-M42032780 + 570 514.9102.02 Version: H, unused in opened original packaging, 100% functional, scope of delivery as per photos Gujdjy Nr D Tepfx Abfsf

Condition: new, Baldor A.S.R. Servotron EPCPNM30-1C circuit board in opened original packaging, 100% functional. Godpfxji D T Dro Abfsuf

Year of construction: 2026, condition: new, We also offer leasing and financing options. Feel free to contact us! Gsdpfx Aoqvmpfsbfeuf For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Condition: used, Year of construction: 2022, PCB Separator Aurotec AUO 3000C Vacuum Cleaner Aurotec YSF-V553 Gsdsx U R S Tspfx Abfjuf

Condition: excellent (used), Year of construction: 2012, operating hours: 1,522 h, Fish / Meat Bone Separator Gujdpsyckiaofx Abfof Make: Sepamatic Model: 2000VT Built 2012 Low running hours: 1522 supplied with 2 drums

Condition: ready for operation (used), * Brand: Titech Tomra Gujdpfxeywnf Nj Abfjf * Model: optical separator * Type: Autosort NIR1 S2000 X-L

Condition: ready for operation (used), * Brand: Titech Tomra Guodpfxsywnf As Abfsf * Model: optical separator * Type: Autosort NIR1 S2000 X-L * Incl.: belt conveyor with length 5000 mm, * Beltwidth: 2000 mm.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Gusdpfxjua Tbws Abfsf

Condition: new, Year of construction: 2024, functionality: fully functional, Magnetic coolant separator MMA series, type MMA-100a Made in Poland by MultiMasz. Declaration of Conformity + manufacturer's warranty. Gusdpfxjuuinws Abfjf MMA-63a transmitting capacity 63 l/min. MMA-100a transmitting capacity 100 l/min. MMA-160a transmitting capacity 160 l/min. MMA-250a transmitting capacity 250 l/min. Standard Voltage 3 X 400V/50Hz [other on request] Rotation speed of the drum 4,9 rpm Power 0,18 kW MMA separators are designed for work primarily on grinding machines, and other machines tools and devices with water-based coolants, or straight cutting oils, to extends the life cycle of machine tools and the cooling fluids. MMA Separator provides increased productivity with less downtime for machine coolant replacement. It is the best solution to perform the machining accurately due to the quality of the surface and the accuracy of the final dimensions. Shipping available all over the world.

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. Godpfxewcp I As Abfsuf The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: new, power: 27 kW (36.71 HP), Year of construction: 2025, Mizar Densimetric Separators efficiently separate materials based on their density differences. This technology is ideal for separating materials of different densities in recycling processes, offering superior performance, especially in applications where metals and plastics need to be separated. Guodswm Apnepfx Abfsf The DES Series is equipped with precise adjustment mechanisms and high-performance fan systems, optimized down to the finest detail. As a result, low-density materials collect at the back, while high-density materials like copper accumulate at the front, ensuring effective separation. In addition to energy efficiency and low operating costs, the automation systems and user-friendly control panels make the processes easy to manage.

Condition: new, functionality: fully functional, overall weight: 24,000 kg, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: MYC1500x6000F4000, Crawler Mobile Mud Stone Separator – Model MYC1500×6000F400O The MYC1500×6000F400O Crawler Mobile Mud Stone Separator is a high-performance soil and stone separation machine developed by Henan Mingyuan Heavy Industrial Equipment Co., Ltd. It is designed for efficient separation of clay, mud, and fine soil from mixed materials such as sand, gravel, and construction waste. With its crawler-type mobility, large-capacity drum screen, and intelligent control system, this model provides a flexible and reliable solution for material cleaning and classification in complex working environments. Applications The MYC1500×6000F400O is widely used in: Sand and gravel production: Removes clay and impurities from raw aggregates, improving product quality. Construction waste recycling: Separates soil and debris for reuse of clean aggregates. Mining and quarrying: Pre-screens and washes ores, removing sticky soil before crushing or beneficiation. Infrastructure and road construction: Cleans and classifies soil and stone for foundation preparation. Municipal and river dredging projects: Separates sediment, stones, and debris from dredged materials. Its crawler chassis allows easy movement on muddy or uneven ground, making it ideal for on-site operations where fixed installations are not practical. Main Features 1. Crawler Mobile Design Equipped with a heavy-duty crawler chassis and hydraulic drive, the machine can move flexibly on various terrains. It eliminates the need for additional transport equipment, reducing setup time and improving efficiency. 2. High-Efficiency Drum Screening The 1500 mm diameter and 6000 mm long rotary drum provide a large screening area and high throughput. The wear-resistant mesh panels ensure long service life and easy maintenance. The optimized screen aperture effectively separates mud and fine soil from larger aggregates. Gjdpfxsy Dz U Dj Abfeuf 3. Integrated Cleaning System Internal spiral blades and high-pressure spray nozzles work together to wash and separate sticky materials. This dual-action cleaning ensures clean aggregates that meet construction and production standards. 4. Intelligent Control The PLC control system allows adjustment of drum speed, water flow, and feed rate according to material conditions. Automatic overload protection and fault alarms enhance safety and reliability. 5. Energy-Saving and Eco-Friendly The hydraulic-electric hybrid drive reduces fuel consumption and emissions. The water recycling system minimizes water usage, making it suitable for environmentally sensitive areas. 6. Easy Maintenance Modular design and accessible components simplify inspection and servicing. Quick replacement of wear parts reduces downtime and maintenance costs. 7. Strong Adaptability Capable of handling clay-rich soil, river sand, construction debris, and weathered rock. Adjustable screening parameters make it suitable for different particle sizes and moisture levels. Technical Parameters Specification Model:MYC1500×6000F400O Screen Typ: roller screener Roller screener width/:1500 mm Roller Screener Length:6000 mm Feeding Size≤ 600 mm Capacity: 80–300 t/h (depending on material) Power System Diesel engine + hydraulic drive Mobility:Crawler-type chassis Control System PLC intelligent control Water System High-pressure spray, adjustable flow Discharge Dual outlet for clean stone and mud Weight :Approx. 22 tons Dimensions (L×W×H):9,800 × 2,800 × 3,200 mm

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Gjdpezt Ipkofx Abfouf Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Gujdpfx Ajzf Nbxsbfjf