Used Gildemeister Ctx 420 Linear for sale (231)

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 02260001501, turning length: 600 mm, turning diameter over cross slide: 324 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 635 mm, indexing of C-axis: 0.025 °, TECHNICAL DETAILS Control system: SIEMENS Max. circulation diameter: 680 mm Circulation diameter via X-guide: 565 mm Max. turning diameter: 324 mm Max. turning length: 600 mm Main spindle Spindle head diameter (flat flange): 170h5 mm Max. bar diameter: 65 mm Spindle diameter (front bearing): 120 mm Spindle bore: 79 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 5,000 rpm Torque S1, 100% ED: 270 Nm Buckling speed: 900 rpm C-axis (main spindle) Speed: 250 rpm Holding torque: 200 Nm Pitch accuracy: 0.025° Counter spindle Spindle head diameter (flat flange): 140h5 mm Max. bar diameter: 42 mm Spindle diameter (front bearing): 90 mm Spindle bore: 57 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 7,000 rpm Torque S1, 100% ED: 160 Nm Buckling speed: 1,500 rpm C-axis (counter spindle) Speed: 250 rpm Holding torque: 120 Nm Pitch accuracy: 0.025° Cross slide (X/Y/Z) Face travel (X): 185 mm Longitudinal travel (Z): 635 mm Vertical travel (Y): +40 mm Rapid traverse speed (X/Y/Z): 60/15/45 m/min Feed force (X/Y/Z): 3.5/7/7 kN Ball screw (Y): 40x5 mm Ball screw (Z): 40x15 mm Counter spindle (Z2) Longitudinal travel: 666 mm Input speed: 45 m/min Ball screw: 40x15 mm Tool carrier Driven tools: 12 Shank diameter (VDI 69880): 40 mm Max. power: 9.4 kW Torque: 20 Nm Speed range: up to max. 4,500 rpm Chqdjmsl0K MACHINE DETAILS hydraulic system Capacity: 10 l Pump output: 2.2 kW Max. pressure: 80 bar Clamping device and tailstock pressure: 10-60 bar Coolant device Capacity: 210 l Pump capacity: 1.7 kW Delivery rate (at 6 bar): 20 l/min Electrical power requirement Connected load: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuse protection: 80 A Voltage fluctuation: +6%/-10% Bar loader Manufacturer: Breuning Notes - The tools shown in the turret are not part of the auction. - The collets for the collet chuck are included.

Year of construction: 2003, Condition: ready for operation (used), Main Drive Number of axis 3 Additional Equipment Tool support system: Rev. 20/20 It is equipped with a bar feeder and driven tools. Longitudinal slide travel: 635 mm Spindle nose (DIN flat flange): 170h5 Cqvsyapijs Internal spindle taper: 79 mm Spindle diameter: 120 mm Chuck diameter: 250 mm Max. torque: 270 N Number of bed units: 1 This 3-axis Gildemeister CTX 420 linear was manufactured in 2003. It features a max turning diameter over bed of 680 mm and a chuck diameter of 250 mm, suitable for diverse turning tasks. Equipped with a bar feeder and driven tools, it enhances productivity and precision. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 420 linear machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2002, Condition: excellent (used), Machine-Details Stock-No. 1105-03934 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER Type CTX 420 LINEAR I2Hg3Vi09R Year of manufacture 2002 Type of control CNC Storage location FRANKREICH Country of origin Germany Delivery time available at short notice Freight basis ex Showroom Technical details turning diameter 320 mm turning length 600 mm turning diameter 320 mm control Siemens 840D travel -x axis 260 mm travel -z axis 635 mm swing diameter 680 mm swing diameter over slide rest 365 mm spindle bore diameter 87 mm turret (x-stations) 12 mainspindle speed 5000 1/min rapid traverse x + z axis 24/30 m/min drive capacity - spindle motor 21 kW connected load 40 kVA dimensions 4,32 x 1.72 x 1,77 m Additional information CONTROL SIEMENS 840D WITH SHOP TURM NICE MACHINE WITH LINEARTECHNIK

Condition: used, Year of construction: 2004, turning diameter 324 mm Cfgt7Suh turning length 600 mm control Data Pilot 4290 HEIDENHAIN bar diameter 65 mm swing diameter 680 mm travel -x axis 260 mm travel -z axis 635 mm spindle speed: 5000 1/min spindle bore 79 mm C-Axis 0,025 ° turret head 12 Pos. / VDI 40 Driven Tools 12 Pos. 4.500 U/min rapid traverse X-axis 60 m/min rapid traverse Z-axis 45 m/min taper in tailstock-quill MK 5 tailstock travel 580 mm drive capacity - spindle motor 25 kW voltage 400 V total power requirement 50 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 3,50 x 2,46 x 2,10 m chip conveyor 4,00 x 1,25 x 1,50 m - Serial-No.: 02260003251 - Machine ON: 19.039 h - Programm ON: 2.676 h - control: HEIDENHAIN Data Pilot 4290 - new main spindle bearings - Z-Axis ball screw reconditioned incl. new bearings - electronic hand wheel - C-Axis / driven tools - chip conveyor - coolant equipment - machine lamp

Year of construction: 2003, Condition: ready for operation (used), Control Unit Brand Heidenhain Model Din Plus Main Drive Spindle speed range 25-5000 rpm Movement X-Axis Movement 260 Y-Axis Movement 40 Z-Axis Movement 635 Workpiece Csicazdl Workpiece drm over bed 680 mm Workpiece drm 324 mm This 3-axis Gildemeister CTX 420 Linear was manufactured in 2003. A robust horizontal turning machine featuring a turning diameter of 324 mm, length of 600 mm, and a bar diameter of 65 mm. It operates with a Heidenhain Din Plus control, a 12-slot turret with driven stations, and a chip conveyor. The machine is in good condition and has been operating with a Fanuc robot. Contact us for further details regarding this horizontal turning machine. Application Types Turning

Year of construction: 2003, operating hours: 45,307 h, Condition: ready for operation (used), Control Unit Model 840 Brand SIEMENS Main Drive Number of spindles 2 Spindle speed range 5000 rpm / 7000 rpm Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 40 mm Z-Axis Movement 635 mm Workpiece Workpiece drm 324 mm This 3-axis Gildemeister CTX 420 Linear was manufactured in 2003. A robust horizontal turning machine featuring a turning diameter of 324 mm, length of 600 mm, and a bar diameter of 65 mm. It includes a 12-slot turret with driven stations, a chip conveyor, and a bar feeder SPACESAVER 2003. Ideal for precision tasks with its Siemens 840 control. A great opportunity to buy this Gildemeister CTX 420 Linear horizontal turning machine. Contact us for further details regarding this horizontal turning machine. Application Types Uliqrsmjjl Turning

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Turning diameter: 246 mm turning length: 600 mm Swing diameter over bed: 400 mm Rotation diameter over cross slide: 300 mm Control: Siemens 840D powerline Speed range main spindle: 6,000 min/-1 Drive power main spindle: 16 kW Eavukbt Max. bar diameter: 52 mm C-axis: 360° Counter spindle speed range: 6,000 min/-1 Drive power counter spindle: 7.5 kW C-axis: 360° Tool turret: 12 pos. Number of driven tool stations: 12pos. Speed range of the driven tools: 5,000 min/-1 Drive power of driven tools: 10 kW Tool holder: VDI30 Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Machine weight approx.: 3,700 kg

Condition: excellent (used), Year of construction: 2003, Gildemeister CTX 320 linear CNC lathe Year of manufacture: 2003 Control: Siemens 840D with Shopturn Turning length: 600 mm Turning diameter: 400 mm Bar passage: 52 mm Turning speed: 6000 rpm Motor power: 16 kW X-axis travel: 160 mm Y-axis travel: 450 mm Chuck diameter: 210 mm Turret: 12-fold VDI 30 Weight: 3700 kg Buajkmdy8G

Condition: excellent (used), Year of construction: 2003, operating hours: 67,868 h, Functionality: fully functional, machine/vehicle number: 226-XC 0162, TECHNICAL DETAILS max. circulation diameter: 680 mm Rotation diameter via X-guide: 565 mm max. turning diameter: 324 mm max. turning length: 600 mm Main spindle Spindle head diameter flat flange: 170h5 mm Max. bar diameter: 65 mm Spindle diameter in front bearing: 120 mm Spindle bore: 79 mm Chuck diameter: 200 / 250 mm Drive power S1, 100 % ED: 25 kW Speed range: 5000 rpm Torque S1, 100% ED: 270 Nm Buckling speed: 900 rpm C-axis (main spindle) Speed: 250 rpm Holding torque: 200 Nm Pitch accuracy: 0.025 degrees Counter spindle Spindle head diameter flat flange: 140h5 mm S8Vvmooc Max. bar diameter: 42 mm Chuck diameter: 160 mm Spindle diameter in front bearing: 90 mm Spindle bore: 57 mm Drive power S1, 100% ED: 25 kW Speed range: 7000 rpm Torque S1, 100% ED: 160 Nm Buckling speed: 1500 rpm C-axis (counter spindle) Speed: 250 rpm Holding torque: 120 Nm Pitch accuracy: 0.025 degrees Cross slide X/Y/Z Face path X: 185 mm Longitudinal travel Z: 635 mm Ball screw Z (dxh): 40x15 mm Vertical travel Y: ±40 mm Ball screw Y (dxh): 40x5 mm Rapid traverse speed X/Y/Z: 60/15/45 m/min Feed force X/Y/Z: 3.5/7/7 kN Counter spindle Longitudinal travel Z2: 666 mm Rapid traverse speed Z2: 45 m/min Ball screw Z2 (dxh): 40x15 mm Tool carrier Number of tools: 12 Shank diameter according to VDI 69880: 40 mm Tool disk, radial tool holder SW 320 Number of driven tools: 12 Power max. 100% ED: 9.4 kW Torque 100% ED: 20 Nm Speed range: 4500 rpm Hydraulic system Capacity: 10 l Pump output: 2.2 kW Max. pressure: 80 bar Pressure for clamping device, tailstock: 10-60 bar Coolant device Capacity: 210 l Pump capacity: 1.7 kW Delivery rate at 6 bar: 20 l/min Electrical power requirement Connected load: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuse protection (slow-blow/VDE 0100): 80 A Voltage fluctuation at 400 V: +6% / -10% MACHINE DETAILS Length: 4890 Width: 2440 Height: 2080 Weight (without chip compartment) V4-V6: approx. 6500 kg

Condition: used, Year of construction: 2005, Functionality: fully functional, The used Gildemeister CTX 320 Linear CNC Lathe from 2005, a marvel of engineering precision located in Switzerland. Designed for high-caliber performance, this lathe features a generous turning length of 600 mm, enabling precise and intricate machining tasks. The lathe is controlled by a state-of-the-art Heidenhain iT Plus unit, offering unmatched precision and seamless operation. With a powerful turning speed up to 6000 rpm backed by a 16 kW motor, this machine promises exceptional cutting agility and efficiency, delivering top-notch results for every application. Technical specifications: Control unit: Heidenhain iT Plus Turning length: 600 mm Turning diameter: 400 mm Bar capacity: 52 mm Spindle nose: 5 JIS A-2 / ASA Turning speed: 6000 rpm Motor power: 16 kW X-Axis travel: 160 mm Y-Axis travel: 450 mm Chuck diameter: 210 mm Tools on turret: 12 positions Dimensions: Length: 3905 mm Width: 1553 mm Height: 1830 mm Weight: 4356 kg Included with the Machine: -Various driven and fixed radial. Qsj39Wto -Fixed VDI holders. ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Condition: excellent (used), Year of construction: 2010, operating hours: 72,059 h, turning length: 1,050 mm, turning diameter: 465 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, spindle motor power: 32,000 W, total height: 2,010 mm, total length: 5,300 mm, total width: 2,230 mm, swing diameter over cross slide: 465 mm, torque: 420 Nm, overall weight: 8,100 kg, bar passage: 90 mm, bar diameter: 90 mm, collet bore: 102 mm, CNC controller: SINUMERIK 810D with ShopTurn Capacity X-axis travel mm: 300 Z-axis travel mm: 1.050 Turning length mm: 1.050 Max. turning diameter mm: ø 465 Swing over bed mm: ø 680 Swing over cross-slide mm: 465 Bar work capacity mm: ø90 Upper turret Number of tool slots St .: 12 (6x driven) Brxsmnukim3 Speed ​​driven tools RPM: 4.000 Main spindle Speed ​​spindle rpm: 3.250 Drive power spindle kW: 33/22 (40%/100% DC) Spindle bore mm: 102,5 Spindle nose: Flat flange (220h5) Maximun torque Nm: 420 (100% DC) Tailstock Tailstock travel mm: 850 Holder: MK5 Equipment part catcher Workarea light Foot switch for chuck or collet system Driven tools included Working time hours Spindle 1: 72.059 Rated power kVA: 50 Basic machine dimensions / weight Length mm: 5.300 Width mm: 2.230 Height mm: 2.010 Weight kg: 8.100

Condition: defective spare-parts repository (used), Year of construction: 1995, CNC Lathe Fabr.GILDEMEISTER Type: CTX 600 Year 1995 turning diameter 600 mm turning length 2000 mm chuck Forkardt 315 mm,tool turret Tailstock, chip conveyor. Machine technically in good condition electrically missing parts Machine is good for retofit or spare parts carrier Complete machines C9Xlpkq Documentation available. Only complete sale.

Condition: good (used), Year of construction: 2015, operating hours: 28,735 h, Functionality: fully functional, spindle speed (max.): 5,000 rpm, DMG Gildemeister CTX Beta 500 The DMG Gildemeister CTX Beta 500 is a high-precision and versatile CNC lathe that is ideal for demanding production tasks. This machine combines state-of-the-art technology with reliability and precision and is ideal for machining workpieces with complex geometries. Technical data: - Model: CTX Beta 500 - Manufacturer: Gildemeister Drehmaschinen GmbH - Year of manufacture: 2015 - Control: Siemens 840D - Spindle hours: 11,344 hours - Tool holder VDI40 12 Pos. - Heat exchanger for spindle - Direct position measuring system - IKZ 600 l - Chip conveyor - Oil mist extraction - Including approx. 60 tools Cplf0A9Psi - Rotation diameter over bed: 700 mm - Rotation diameter over slide: 380 mm - x -axis: 300 - y -axis: 120 (+/- 60) mm - z -axis: 550 mm

Condition: good (used), Year of construction: 2009, Machine is in good working condition. Parts from pictures will come. With machine will come 3 + 3 live tool holder, and equipement from boxes. Cutting tools not come. Technical details shown on picture. Dqmpzx

Condition: excellent (used), Year of construction: 2010, Heidenhain Turn Plus IT control Turning diameter 410 mm turning length 500 mm Main spindle speed 5,000 min-1 Counter spindle speed 6,000 min-1 16-position turret with driven tool Chip conveyor Cz29Cpksaq Bar loading magazine IRCO SIMAG

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand SIEMENS Model 840 D powerline Main Drive Spindle motor power 36/45 kW (100/40% ED) Tool taper HSK-63A DIN 69893 Movement Y-Axis Movement ±110 mm B-Axis Movement ±120° interpolating with hydraulic clamping E2Ps3By Additional Equipment Integrated spindle motor ISM 90 Partial hollow clamping device (hydraulic) C-axis and spindle brake (hydraulic) Triple Hirth serration with 1° indexing Absolute, direct path measuring systems in all linear axes Coolant tank: 500 litres with lifting pump and level control Coolant cleaning with belt filter (40 μm filter fineness) Chip conveyor, discharge height 1100 V24 and Ethernet interface Optional equipment: Star turret, Lower cross slide, NC tailstock Control Unit Brand SIEMENS Model 840 D powerline Main Drive Spindle motor power 36/45 kW (100/40% ED) Tool taper HSK-63A DIN 69893 Movement Y-Axis Movement ±110 mm B-Axis Movement ±120° interpolating with hydraulic clamping Additional Equipment Integrated spindle motor ISM 90 Partial hollow clamping device (hydraulic) C-axis and spindle brake (hydraulic) Triple Hirth serration with 1° indexing Absolute, direct path measuring systems in all linear axes Coolant tank: 500 litres with lifting pump and level control Coolant cleaning with belt filter (40 μm filter fineness) Chip conveyor, discharge height 1100 V24 and Ethernet interface Optional equipment: Star turret, Lower cross slide, NC tailstock This 7-axis Gildemeister GMX 400 linear was manufactured in 2006. A robust turn-mill centre featuring an integrated spindle motor ISM 90, it offers a turning length of 1585 mm and includes a Y-axis of ±110 mm and B-axis of ±120°. Equipped with a 60-position tool magazine and CNC control SIEMENS 840 D powerline, it represents a significant asset for precision machining. Reach out for further details regarding this turn-mill centre. Application Types Turning

Condition: good (used), Year of construction: 2007, - SIEMENS 849 D control unit - Bar capacity 65 mm - Main and counter spindle with speed 5,000 1/min - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) Ba3Rjk7R - Speed of driven tools 4,000 1/min TRAVEL X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Condition: good (used), Year of construction: 2004, Functionality: fully functional, turning length: 1,060 mm, turning diameter over cross slide: 560 mm, turning diameter: 560 mm, CNC control Sinumerik 840D powerline main spindle: 3-jaw chuck sub spindle: 4-jaw chuck milling spindle up (HSK63-A) B-axis 2x C-axis Y-axis Uezyn29D7L tool magazine with 75 places chip conveyor coolant device Technische Daten / technical details: Umlaufdurchmesser / rotary diameter 560 mm max. Drehdurchmesser / max. turning diameter 560 mm Drehlänge / turning length 1060 mm Planweg X / cross way X 485 mm Längsweg Z / longitudinal way Z 1060 mm Weg Y-Achse / travel Y-axis +-80 mm Schwenkbereich B-Achse / swivel range B-axis +-120 ° max. Stangendurchmesser / max. bar diameter 65 mm Drehzahl Hauptspindel / spindle speed main spindle 5000 UpM /rpm Drehzahl Gegenspindel / spindle speed sub spindle 5000 UpM /rpm Drehzahl Frässpindel /speed of milling spindle 12000 UpM /rpm Werkzeugmagazin / tool magazine 75 fach /holes Antriebsleistung je Spindel (40/100%ED) / drive capacity each spindle 37/25 kW Gesamtleistungsbedarf / complete drive capacity 75 kW Gewicht der Maschine ca. / weight ca. 14500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2006, Fanuc control ... Fanuc 32i Turning diameter ... 290mm turning length ... 339mm inclined bed spindle bore ... 56mm tool turret ... 6 Dqlfkb Axis X ... 160mm Axis Z ... 339mm Axis C ... 360° Spindle speed ... 10-6000/min. Machine weight ... 4200kg L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.

Condition: good (used), Year of construction: 2006, Machine is in good working condition Cm8Sskfb2Y

Condition: used, Year of construction: 2001, Technical data: Flat travel: 220 mm Longitudinal travel: 635 mm Turning diameter over bed: 570 mm Turning diameter over support: 420 mm Main spindle: Speed range: 25 - 5000 rpm Drive power 100% ED: 21 kW Max. Torque: 240 Nm Spindle bearing diameter: 120 mm Spindle bore: 79 mm Counter spindle: Speed range: 25 - 5000 1/min Drive power 100% ED: 9 kW Max. Torque: 72 Nm Rapid traverse: 24 m/min Tailstock: Tailstock diameter in the front area: 80 mm Tailstock travel: 550 mm Cfsgl2Jbru Tailstock mount: MK 4 Tailstock force min/max: 1.5 / 8 KN Universal disk-type turret with driven tools: Number of driven tool stations: 12 max. clamping diameter of the attached tools: 13 mm Drive power 100% ED: 5 KW Total power requirement: 44 kVA Dimensions without chip conveyor/chip tray, approx.: 3210 x 1750 x 1750 mm

Condition: used, Year of construction: 2006, turning diameter 0260 mm turning length 580 mm control 840 D Siemens centre height 190 mm turning diameter over bed 500 mm turning dia. over face-slide 365 mm Main spindle: turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle diameter in front bearing 100 mm spindle bore 68,5 mm usable bar diameter 52 mm chucking diameter 210 mm axis stroke: travel -x axis 185 mm travel -z axis 580 mm turret: number of toolpositions 12 pos. tool taper VDI 30 Shank diameter 20 x 20 mm feeds: rapid traverse X: 24 / Z: 30 m/min Feed force 4,5 kN total power requirement 30 kVA weight of the machine ca. 4,25 t dimensions of the machine ca. 5,0 x 2,2 x 1,8 m CNC - Lathe with sub spindle. Control Siemens 840 D. Machine has Y- axe and live tooling. We supply an IEMCA Kid 70 bar loader along with the machine. Bskzusxsi2E

Condition: excellent (used), Year of construction: 2005, technical data in pictures, machine still under power. Bsivucwvpq0

Condition: ready for operation (used), Year of construction: 2001, CNC lathe Gildemeister Graziano GT CTX 400 Control: FANUC 21 Bsjw7Qsdgwk Type of machine: CTX 400 Year of manufacture: 2001 Weight of the machine: 5500 kg Speed range: 25-5000 rpm Rotation diameter over bed: 570 mm Rapid traverse: 20/24 m/min Dimensions L x W x H: 5.5 x 2.5 x 1.7 m Turning length: 600 mm Revolver 12 pos. not driven VDI 40 Tailstock Tailstock taper: MK4 Chuck size: 250 mm Machine works. Spindle ok. Video available.

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 80439431220, CNC lathe Gildemeister CTX 510, Ser. no. 80439431220, year 2005 with chip conveyor DMG, Bpzmk7Vz Ser. no. 11570-00110 and Heidenhain Plus IT control for auction in our online auction with expiry date 26.11.2024 Go via Click-out