Used Deckel Fp1 for sale (727)

Condition: used, Year of construction: 2002, CNC machining center Deckel Maho DMF 250 linear, year of manufacture 2002, and DMC 63 H, year of manufacture 2002 Cgjdeyphl Ejpfx Ah Iop

Condition: good (used), Year of construction: 2001, operating hours: 18,391 h, functionality: fully functional, machine/vehicle number: 11160000853, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Maximum spindle speed: 12,000 rpm Feed rate X-axis: 20 - 15,000 mm/min Feed rate Y-axis: 20 - 15,000 mm/min Feed rate Z-axis: 20 - 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Position measuring system resolution X-axis: 0.001 mm Position measuring system resolution Y-axis: 0.001 mm Position measuring system resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Cgedpjypl Ecofx Ah Iop Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 NC rotary table clamping surface: 630 mm diameter Maximum table rotation: 10.7 rpm Table feed: 3,600°/min Rotary table measuring system resolution: 0.001° Control: Heidenhain Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 18,391 h EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, DMU 35 M Machining Center Year of manufacture: 2001 Heidenhain control Fully functional X: 350 mm Cgedpfx Aheypvx Ts Isp Y: 240 mm Z: 340 mm C: 360° manual B: +105° / -15° manual Without vise Loading possible Available promptly

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 546734, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller manufacturer: Grundig, controller model: MillPlus, We are selling a Deckel Maho DMU 50 V vertical machining center in good used condition, year of manufacture 1996. Csdpfsyn Eu Ujx Ah Isgp

Condition: good (used), functionality: fully functional, well-maintained tool grinder with accessories as shown in the pictures Cgodpfeypka Sex Ah Iop

Condition: reconditioned (used), Year of construction: 2010, CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With Heidenhain iTNC 530 Path Control Year of Manufacture: 2010 Travel distances: X 500 Y 450 Z 400 Spindle speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC rotary tilting table 500mm x 380mm Vertical tool changer with 120 magazine slots Full splash guard cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 ICS 40 bar with paper band filter Chip conveyor 3D measuring probe BLUM tool measuring system in the working area 4-color signal lamp DMG Automation PH 150/8 16 pallets with Allmatic + Lang vices Coolant unit BEMA coolant nozzle 4 height-adjustable machine feet Operating manuals Cgsdpfx Aoyn Nx Reh Iop

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Cedpfx Ahewglfxs Iogp Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Travel measuring system with correction Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!

Condition: used, Year of construction: 1994, x-travel 600 mm y-travel 500 mm z-travel 450 mm control Dialog 11 31,5-5.000 U/min 7,5 kW SK 40 Ø 500 mm 30 Stück 6 m / min. m/min 4,3 t dimensions 3,5 x 2,4 x 2,2 m Universal Milling- and Boring Machine Cjdpfxsvvcc Uo Ah Iogp - full covered - coolant system - tool changer - external hand wheel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,500 mm, overall weight: 10,600 kg, number of axes: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Additional equipment • 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree • Workpiece probe • Internal cooling Cgjdox I S Shspfx Ah Iop • Large coolant tank with automatically coated filter paper Machine Benefits Technical Machine Benefits • Table size: 400 x 400 mm • Tool magazine: 60 positions Extra Information Machine still under power Dimensions Machine Depth 6000 mm Technical Specification Through-spindle Coolant Yes

Condition: used, Tool cabinet, unit price: €200.00 Cgedpfx Ahjypdalj Iep

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,440 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,440 mm, feed length Y-axis: 600 mm, feed length Z-axis: 510 mm, nominal power (apparent): 39 kVA, controller manufacturer: Heidenhain, controller model: 530, workpiece height (max.): 500 mm, table width: 600 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 100 mm, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Deckel Maho DMC 144 V linear vertical machining center, year of manufacture 2003. Transformer power: 39 kVA Maximum current: 53 A Current: 63 A Supply voltage: 400 V Cjdpfoyn Eqvsx Ah Iogp Frequency: 50 Hz Auxiliary voltage: 230 V Control voltage: 24 V Year of manufacture: 2003 If you have any questions or require further information, please contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: 840D Control, number of axes: 4, This 4-axis DECKEL DMC 835 V was manufactured in 2007. It features an NC dividing head EA 410, manual tailstock, and a TS 640 measuring probe. Additional highlights include a coolant/air blast switch, flushing gun for chip removal, and an electronic handwheel. This machine is complete with accessories. If you are looking to get high-quality milling capabilities consider the DECKEL DMC 835 V machine we have for sale. Contact us for more information. Additional equipment • NC dividing head EA 410 • TS 640 measuring probe • Coolant/air blast switch • Flushing gun for chip removal • Electronic handwheel – Operating mode 4 Machine Benefits Technical Machine Benefits Csdpfx Aox D Iu Ush Isgp • Manual tailstock • Faceplate diameter: 160 • Three-jaw chuck diameter: 160 • Machine complete with accessories • On hour 17275 / spindle hours 5803 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, controller model: Millplus V400, number of axes: 3, This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Control & Electrical • Control: Millplus V400 • Screen: Color, text in German/English • Operating Voltage: 400 V, 50 Hz • Control Voltage: 24 V • Drive: Digital with overload protectionSpindle & Tooling • Spindle: With quill • Maximum Spindle Speed: 6,300 rpm (speed range with gearbox: 20–6,300 rpm) • Tool Holder: ISO 40 – DIN 69871 • Pull Stud: DIN 69872 Form A • Tool Changer: 24–25 tool positionsWorking Area & Movement • Longitudinal (X) Travel: 600 mm Cjdpfx Ahjx D Nalj Isgp • Cross (Y) Travel: 525 mm • Vertical (Z) Travel: 500 mm • Rapid Traverse X/Y/Z: 18 m/min • Feed Rate: Up to 10,000 mm/min • NC Rotary Table: 3-axis on fixed tableCooling & Accessories • Coolant System Capacity: 150 L • Full Enclosure: Yes • Paint: Gray / Green (NCS)Documentation • 2 sets, GermanThe machine has a 4-axis C-axis (dividing head)

Condition: good (used), Deckel CNC tool milling machine Control Dimensions & weight: Weight: approx. 1.3 t - 1.5 t. Dimensions: approx. L x W x H 1.5 m x 1.5 m x 1.6 m The machine is equipped with mechanical handwheels for manual operation in addition to CNC control Control: DECKEL Dialog 4 (6004 50 004602 02) Codpoynf E Tsfx Ah Iegp Training machine The data was read from the machine, therefore given without guarantee

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Cgedpfx Ahjyml U So Iep Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,183 h, functionality: fully functional, machine/vehicle number: 15035709304, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, The machine will remain powered until 06.03.2026. TECHNICAL DETAILS Travel distances X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm C-axis: ±360° B-axis: 180° Cgsdpjymmpdjfx Ah Isp Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input/display unit: 0.001° Maximum tool length from spindle nose: 315 mm Maximum tool weight (with automatic tool changer): 6 kg MACHINE DETAILS Control system: Siemens 840D Shop Mill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight (including base): 9,255 kg EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor IKZ (internal coolant supply) with 70 bar Blum TC50 spindle probe

Condition: good (used), travel distance X-axis: 1,080 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, In working condition Cedpfxjylvb He Ah Isgp

Condition: good (used), travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, In working condition Cgjdpfx Aoylvc Deh Iep

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 3,600 m/min, feed rate Y-axis: 3,600 m/min, feed rate Z-axis: 3,600 m/min, quill stroke: 80 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table length: 530 mm, table width: 900 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 450 kg, Equipment: rotational speed infinitely variable, The machine is designed and built to be very stable and robust. Thanks to its excellent accessibility, it is extremely user-friendly. The machine can also be moved manually using mechanical handwheels. CNC Path Control DECKEL Dialog 11 Easily programmable 3D path control with color graphic support, dialogue guidance for cycle input, contour path calculator, editor functions, clear program and tool management, and the possibility of parallel programming. Travel paths X / Y / Z: 560 / 500 / 450 mm Cjdpfx Asyn Dq Ijh Isgp Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with drawbar according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manually retractable quill in vertical direction 80 mm. Milling head: Manually swivels +/- 90° Speed range: 40–4000 rpm, geometrically stepped Direct-drive gearbox for maximum torque / milling performance at the working spindle Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angle table: 530 x 900 mm, max. load capacity 450 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Csdpfx Aju Hf Ryjh Isgp Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rotary table diameter: 1,500 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head 180/-7° stepless Codpew Ngk Hofx Ah Iogp

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Codpfx Aow Ngipeh Isgp Pallet size: 1000*800 mm

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Cjdpfsym Nb Ajx Ah Ijgp Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva Cgjdsx Nr Tuepfx Ah Ijp • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: ready for operation (used), Year of construction: 2000, Immediately available from toolmaking in Switzerland: 5-axis milling machine Deckel Maho Type: DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Table load up to 100 kg Travel X/Y/Z: 350/240/340 mm Csdpsyl Ua Ijfx Ah Iegp Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servomotors for X/Y/Z axes Swivel range: 360° Table clamping: +105/–150° Weight: 2 t Tool holders, hydraulic vise Price: EUR 6,500 plus VAT ex works location.